CHANGING A R
T
using the ST button (the relativ
amber), then select the desired cycle and press the ST
button again.
!
button.
A
This will be indicated by the w
symbol switches o
the laundry and switch o the machine. If you do not press ON/OFF
button, the washing machine will switch o automatically after about a
half of an hour
OPTIONS
- If the selected func
relevant indicat
be signalled by a buzzer (3 beeps) and the wNot Selection ”
appear on the display
- If the selected func
function, the wording Not Selection ”
the function will not be enabled.
Steam Hygiene
This option enhances washing performance by generating steam during
the wash cycle to remov
at the same time. Place the laundry in the drum, choose a compatible
programme and select option .
!
cause the porthole door to become haz
Delay T
T
repeatedly until the desir
start setting, press the button until -- h ”
T
Each wash cycle has a pre-
temperature button.
Spin
Each wash cycle has a pre-
press the button.
Direct Injec
The washer-dryer is equipped with the innovative technology «Direct
Injection» which pre
activating the detergent’
directly introduced into the drum of the w
bres with more ecacy in cleaning even heavily soiled garments at lo
temperatures
The mode «P
«EcoEnergy» allow
Drying
The desired drying cycle type may be set by pressing the DRYING button
once or several times. Two options are available:
A - Based on the how damp the clothes are once they have been dried:
Iron: suitable for clothes which will need ironing afterwards. the
remaining dampness softens creases, making them easier to remove.
Hanger: ideal for clothes which do not need to be dried fully.
Cupboard: suitable for laundry which can be put back in a cupboard
without being ironed.
Extra: suitable for garments which need to be dried completely, such as
sponges and bathrobes.
B - Based on a set time period: between 30 and 180 minutes.
To exclude the drying phase press the relevant button until the text OFF
appears on the display.
If your laundry load to be washed and dried is much greater than the
maximum stated load, perform the wash cycle, and when the cycle is
complete, divide the garments into groups and put some of them back
in the drum. At this point, follow the instructions provided for a “Drying
only” cycle. Repeat this procedure for the remainder of the load. A
cooling-down period is always added to the end of each drying cycle.
Drying only
Press button to perform the drying-only cycle.
After selecting the desired cycle (compatible with the type of garments),
press button to exclude the washing phase and start the drying
phase at the maximum level for the selected cycle. The drying level or
time may be set and changed by pressing the drying button .
Multi Rinse
This option allows f
skin. Press the button once to set levExtra +1 ”
selecting an additional rinse to the standard cycle rinses and removing all
traces of detergenExtra +2 ”
allows for selecting two additional rinses to the standard cycle rinses; this
cycle is recommended for v
for the third timeExtra +3 ”
3 additional rinses to the standard cycle rinses.
cycles at a temperature of 40°C, this option makes it possible to r
major allergens such as pollen and cat or dog hair
at temperatur
protection is achieved. PNormal
Rinse”
will Not Selection ”Not Change ”.
KEY L
T button for
roughly 2 seconds.
panel is locked (except f ).
accidental modications to wash cycles, especially when childr
home.
button for appr
TIPS AND SUGGESTIONS
Divide the laundry according to:
T
hand-washed). Colour (separa
new coloured garments separat
nylon stockings – and items with hooks – such as bras: insert them in a
fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washer-dr
drum. Check all buttons.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washer
and disconnect it from the mains power
clean the washer-dryer.
Cutting o the wa
T
hydr
Unplug the washer-dr
Cleaning the washer-dryer
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water
abrasives.
The washer-dryer has a
run without any load in the drum.
T
quantity 10% the quantity specied for lightly-soiled garments) or special
additives to clean the washer-dryer
programme ev
T button for 5 seconds then press ST
P to start the cycle, which will last roughly 70 minutes
Cleaning the detergent dispenser dr
Remove the dispenser draw
under running water; this procedur
Caring for the door and drum
Always lea
from forming
Cleaning the pump
The washer-dryer is tted with a Auto Clean pump which does not require
any maintenanc
fall into the protective pr
! Make sure that the wash cycle has ended and unplug the appliance.
T
1. remove the c
a screwdriver in the c
2. loosen the drainage pump cov
normal for some water t
3. clean the inside thoroughly;
4. screw the cov
5. put the panel back in place, making sure the hooks slot in place bef
pushing the panel onto the appliance
Checking the water inlet hose
Check the inlet hose at least once a year
be replaced: during wash cycles, the high pr
suddenly split the hose open.
! Never use hoses that hav
L
Before ev
spin and to distribute the load in a uniform manner
continuously at a speed which is slightly gr
rotation speed. If
correctly
excessiv
process instead of spinning
balance, w
A
Contact our T
accessories are av
Stacking kit
With this acctumble dr
your washer-dryer to save space and facilitate loading and unloading of
the tumble dryer
TRANSPORT AND HANDLING
Do not lift the washer-dr
Unplug the appliance and close the water tap
detergent dispenser dra
from the water tap then detach the dr
remaining in the hoses and secure the latt
damaged during transport. Apply the transpor
reverse or
“Installation instructions”
