449647
3
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
5019 401 05128
Add the detergent as described in the chapter “Detergent
and Additives” in the booklet.
1. Turn the
programme selector knob
in any direction
to the desired programme.
This appears in the LCD display, together with spin
speed, wash temperature and wash programme
duration (in hours and minutes). The indicator light
above the
“Start/Pause”
button will blink.
2. Temperature and spin speed can be changed using the
“”
button as well as the “ ” and “
buttons.
3. The additional options available for the wash
programme can be selected with the “ ” button.
“Spin Speed”
A maximum spin speed is assigned to each
programme.
Press the
“”
button until “To set Spin Speed”
appears in the LCD display. The set spin speed blinks
and can be changed with the “ ” and “ ” buttons.
If the spin speed “0” is selected, the final spin is
cancelled. The water is drained out only.
“Prewash”
Only for heavily soiled laundry (for example. sand or
granular dirt. Programme duration is increased by
some 15 min.
“Intensive rinse”
An additional rinse cycle is carried out.
This additional option is particularly suitable for areas
with very soft water, for washing baby linen and
helping people with detergent allergies.
“Rinse hold”
The laundry remains in the last rinse water without
being spun: discoloration of the laundry and additional
creasing are prevented.
This option is particularly recommended for the
programme “Easy Care” or “Delicates”.
This additional function is particularly useful if you want
to postpone spinning to a later time.
Note:
The programme has reached “Rinse hold” when
the corresponding symbol blinks in the LCD.
Terminate the “Rinse Hold” option:
Press the
“Start/Pause”
button; the programme will
terminate automatically with the appropriate spin cycle
for the current programme.
If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press the
Start/Pause
” button.
CONSUMPTION DATA
*
Programme Te m p e r a t u r e
(°C)
Size of wash
(kg)
Water
(l)
Energy
(kWh)
Programme duration **
approx.
(hours : minutes)
Cotton
95 6.0 54*** 1.90 1:55
Cotton
60 6.0 49 1.14 2:20
Cotton
40 5.0 47 0.70 2:00
Easy Care
60 2.5 55*** 0.70 1:30
Easy Care
40 2.5 50 0.50 1:15
Daily Load
40 3.0 48 0.55 1:00
Delicates
30 1.5 60 0.50 0:45
Wool
40 1.0 60 0.50 0:40
Rapid Plus
30 3.0 37 0.40 0:30
Handwash
30 1.0 45 0.40 0:35
* Consumption
values
were measured in normal conditions in compliance with Standard IEC 60456.
** The
programme duration
may vary from the chart values. The washing machine will allow for individual household
conditions and adapt the programme run time accordingly.
*** To reduce
the water temperature, some cold water is
added at the end of the main wash cycle, before the pump
drains the water out.
POUR IN DETERGENT, CLOSE THE DOOR
AND SELECT A PROGRAMME
PRESS THE DESIRED SPECIAL OPTION
BUTTON
“Eco”
The duration of the wash is extended and the
temperature reduced. This saves you up to 30%
energy and still maintains good washing results
“Easy Iron”
To lessen creasing, the water quantity is increased and
the clothes are spun very gently at reduced power.
This makes your laundry significantly damper at the
end of the programme.
Turn the programme selector to “Memory”.
Select one of the 10 storage spaces using the “ ” or
” button and confirm with “OK”.
A list of all the available wash programmes appears in
the LCD. Select the desired programme with “
and “ ” and confirm with “OK”.
You can then, as already described, select available
additional options for the wash programme and set
temperature and spin speed as desired.
When all the settings have been made and confirmed
with “OK”, the programme is stored in the selected
storage space and can be reselected at any time and
run using
“Start/Pause”
.
The “Start Delay” allows you to run the machine at your
convenience, for example at night when electricity is
cheaper.
Press the “Start Delay” button. Using the “ ” and
” keys, you can set the time on the display to
when you want the wash programme to start, then
confirm this with “OK”.
Press the
“Start/Pause”
button. “Start at ...” appears
in the LCD display until the preset start time is
reached. The wash programme then starts
automatically.
During the programme, the remaining time appears in
the LCD.
“Start Delay” correction.
If you have already confirmed the desired start time
with “OK” or have already pressed
“Start/Pause”
,
they can still be changed. To do this, press the “Start
Delay” button again.
The set time blinks and can be changed with the “
and “ ” buttons. Then you only need to confirm the
changed time with “OK” again.
After you have selected the programme and any additional
options, the indicator light above the
“Start/Pause”
button blinks. Turn on the tap and start the programme by
pressing the
“Start/Pause”
button.
The indicator light above the button will now illuminate.
The stage of the wash programme appears in the LCD, as
well as the time remaining until the end of the wash
programme.
In the first 15 minutes after the start of the “Cotton” and
“Easy Care” programmes the door can be opened to add
further laundry.
“You can add an item” will appear in the LCD as long as this
option exists. This is not possible if “Rapid Plus” is selected.
The time remaining on the LCD shows 0:00, and
displays “END OF CYCLE”.
1. Turn the programme selector with the marking to the
top.
2. Close the water tap.
3. Open the door and unload the machine.
A newly-selected programme will continue in the same
programme section during which the current programme
was interrupted. Therefore do not add any more
detergent.
1. Press the
“Start/Pause”
button to interrupt the
programme.
The indicator light flashes.
2. Select the new programme (with temperature), any
additional options and - if you wish - another spin
speed. In this way you can also select an additional
option later, without changing the current programme.
3. Press the
“Start/Pause”
button again to re-start the
programme.
If you are in the “Prewash” programme step this
additional option can not be deselected as described
(to do this see “Cancel/Delete programme”)
1. Press the
“Start/Pause”
button
to interrupt the programme.
The indicator light flashes.
2. Press the “Reset” button.
“Do you want reset” appears in the LCD.
3. Confirm with the “OK” button to start draining the
water.
STORE INDIVIDUAL PROGRAMME
(“Memory”)
START DELAY
PROGRAMME START
DOOR LOCK
PROGRAMME END
RESELECT AFTER PROGRAMME START
CANCEL/DELETE PROGRAMME
4GB05128.fm Page 2 Saturday, December 13, 2003 1:14 PM
Black process 45.0° 100.0 LPI
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bauknecht WA 87660 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bauknecht WA 87660

Bauknecht WA 87660 Bedienungsanleitung - Deutsch - 19 seiten

Bauknecht WA 87660 Bedienungsanleitung - Holländisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info