Bedienungsanleitung BEKO WMG10454 (Seite 45 von 48) (Englisch)

556809

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

45 / EN

Washing Machine / User’s Manual

Problem Reason Solution

Detergent residue in the

detergent drawer. (**)

Detergent is put in wet drawer. Dry the detergent drawer before putting

in detergent.

Detergent has gotten damp.  Keep detergents closed in an environment

free of humidity and do not expose them

to excessive temperatures.

Water pressure is low.  Check the water pressure.

The detergent in the main wash compartment

got wet while taking in the prewash water.

Holes of the detergent compartment are

blocked.

 Check the holes and clean if they are

clogged.

There is a problem with the detergent drawer

valves.

 Call the Authorized Service Agent.

Detergent might be mixed with the softener.  Do not mix the softener with detergent.

Wash and clean the dispenser with hot

water.

Regular drum cleaning is not applied.  Clean the drum regularly. For this, please

see 4.7.2.

Too much foam forms in

the machine. (**)

Improper detergents for the washing machine

are being used.

 Use detergents appropriate for the

washing machine.

Excessive amount of detergent is used.  Use only sufficient amount of detergent.

Detergent was stored under improper

conditions.

 Store detergent in a closed and dry

location. Do not store in excessively hot

places.

Some meshed laundry such as tulle may foam

too much because of their texture.

 Use smaller amounts of detergent for this

type of item.

Detergent is put in the wrong compartment.  Put the detergent in the correct

compartment.

Softener is being taken early.  There may be problem in the valves

or in the detergent dispenser. Call the

Authorized Service Agent.

Foam is overflowing from

the detergent drawer.

Too much detergent is used.  Mix 1 tablespoonful softener and ½

l water and pour into the main wash

compartment of the detergent drawer.

 Put detergent into the machine suitable

for the programmes and maximum

loads indicated in the “Programme and

consumption table”. When you use

additional chemicals (stain removers,

bleachs and etc), reduce the amount of

detergent.

Laundry remains

wet at the end of the

programme. (*)

Excessive foam might have occurred and

automatic foam absorption system might have

been activated due to too much detergent

usage.

 Use recommended amount of detergent.

(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

to prevent any damage to the machine and to its surrounding environment. Laundry should be

rearranged and re-spun.

(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2

CAUTION: If you cannot eliminate the problem although you follow the instructions in this section,

consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WMG10454 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info