UKCA Declaration of Conformity
Bresser UK Ltd. has issued a „Declaration of Conformity“ in accordance with applicable guidelines
and corresponding standards. The full text of the UK
the following internet address: www
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Wa
NOTES ON CLEANING
• Remove the batteries before cleaning.
• Only use a dry cloth to clean the exterior of the device. T
not use any cleaning fl
• Protect the device from dust and moisture.
W
The regular guarantee period is 5 years and begins on the day of purchase. Y
full guarantee terms as well as details of our services at www
you like detailed instructions for this product in a particular language? Then visit our website via the
link below (QR code) for available versions.
bresser
precise address, a valid phone number and email address, as well as the article number and name.
*Number charged at local rates in Germany (the amount you will be charged per phone call will depend
on the tariff
www
SERVICE AND
www
MANUAL DOWNL
OVERVIEW
WIRELESS THERMO POOL SENSOR
1. LCD display
2. Thermo sensor
3. [ °C /°F ] key
4. [ CHANNEL ] slide switch
- Assign the sensor to channel 1,2,3,4,5,6 or 7.
5. Battery compartment
- Accommodates 2 x
6. [ RESET ] key
7. Wire hole
8. T
GETTING ST
1. T
to open.
2. Select the sensor channel.
Art.No.: 7009973
Pool/Spa
Water temper
EN INSTRUCTION MANUAL
DE BEDIENUNGSANLEITUNG
EN INSTRUCTION MANUAL
About this Instruction Manual
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone
else, the instruction manual must be provided to the new owner/user of the product.
GENERAL W
• Risk of electric shock — This device contains electronic components that operate via a
power source (batteries). Children should only use the device under adult supervision. Only
use the device as described in the manual; otherwise, you run the risk of an electric shock.
• Choking hazard — Children should only use the device under adult supervision. Keep
packaging material, like plastic bags and rubber bands, out of the reach of children, as these
materials pose a choking hazard.
• Risk of chemical burn — Keep batteries out of the reach of children! Make sure you insert
the batteries correctly
battery acid with skin, eyes and mucous membranes. In the event of contact, rinse the
aff
• Risk of fi— Do not expose the device to high temperatures. Use only the
recommended batteries. Do not short-circuit the device or batteries, or throw them into a fi
Excessive heat or improper handling could trigger a short-circuit, a fi
• Do not disassemble the device. In the event of a defect, please contact your dealer
will contact the Service Centre and can send the device in to be repaired, if necessary
• Use only the recommended batteries.
complete set of batteries at full capacity
diff
a long time.
SCOPE OF DELIVER
Sensor
BEFORE YOU BEGIN
• We recommend using alkaline batteries. If temperatures regularly fall below 0°C (32°F), we
recommend using lithium batteries.
•
requirements.)
• Insert batteries before fi
2x
EC Declaration of Conformity
Hereby
in compliance with Directive: 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www
3. Remove the battery door
4. Insert 2 x
battery compartment. Make sure you
insert them the right way according to
the polarity information marked on the
battery compartment.
AA
5. Close the battery door
6. T
make sure the top and button lock
indicator align to complete the setup.
NOTE:
Ensure the water tight O-ring is properly
aligned in place to ensure water resistant.
NOTE:
- Do not twist the sensor cable and keep it straight.
- Once the channel is assigned to a Wireless thermo sensor, you can only change it by
removing the batteries or resetting the unit.
- After replacing the batteries of the wireless sensor or the unit fails to receive wireless
sensor signal of a specifi[ SENSOR ] key on the console unit to
manually receive the sensor signal again.
LCD DISPLA
Once the sensor power up, you can fi
sensor
13
1. Current channel of the sensor (e.g. switch to channel “6”)
2. Low battery indicator
3. Current T
WIRELESS SENSOR
This pool sensor can support diff
to setup the display console.
1. In normal mode, press the console [ SENSOR ] key once to start receiving the
sensor signal of current on displaying channel. The signal icon will fl
For example, when CH 6 is displayed, pressing [ SENSOR ] key will start receive for
CH 6 only
2. The signal icon will fl
5 minutes the icon will disappear
The icon blinks once every time when incoming wireless sensor
signal is received (every 60s)
Fair wireless sensor signal
Weak wireless sensor signal
Bad / no wireless sensor signal
3. If the signal for Ch 1~7 has discontinued and does not recover within 15 minutes, the
temperature and humidity will display “Er ” for the corresponding channel.
4. If the signal does not recover within 48 hours, the “Er ” display will become
permanent. YEr ” channel’s sensors and then
press [ SENSOR ] key to pair up with the sensors per each “Er ” channel again.
NOTE:
The operation or signal icons of diff
to the user manual of your display console for more detail.
SENSOR PLACEMENT
Place the sensor in the pool within 30 meters (100 feet) of the display console and avoid
side wall of the pool block the sensor signal.
Display
console Pool sensor placement
LOW BA
If the sensor is low in battery ” will display on the LCD of the
sensor and display console.
NOTE:
On the display console, the low battery icon will only appear when the corresponding
channel is displaying.
PRECAUTIONS WHEN
Outer O-ring
Inner O-ring 1. Opening the casing:
- Unscrew the bottom casing carefully in
direction indicated
- There are 2 o-rings , one inner and one
outer in blue color between the 2 casings
- The outer O-ring may drop down and
rest on the bottom casing.
Inner O-ring Outer O-ring 2. Before closing the casing:
- Ensure the unit is wiped dry completely
or leave to dry to avoid trapping any
moisture inside
- Carefully place both O-rings back into
their respective grooves, and apply
water-tightness jell/grease if necessary
Misplaced
outer O-ring
3. Closing the casing:
-Ensure the outer O-ring is not misplaced (as
shown) when closing the casing
-Close the casing tightly such that the 2
vertical arrows aligned vertically and pointing
to each other (circled in gray) W
may condense on the LCD if moisture is
trapped inside the unit. Just leave the unit
open and let the droplet evaporate naturally
before closing the casings
IMPORT
- Read and keep these instructions.
- Do not subject the unit to excessive force, shock, dust, temperature or humidity
- Do not cover the ventilation holes with any items such as newspapers, curtains etc.
-T
change without notice.
SPECIFICA
Dimensions (W x H x D) 100 x 207.5 x 100 mm
Main power 2 x
(Alkaline battery recommended)
Operating temperature range -5°C ~ 60°C ( -23°F ~ 140°F ) do not recommend
under freeze condition
RF frequency 868Mhz (EU, UK)
RF T 60 seconds
RF transmission range Up to 30 m (100 feet) line of sight
DISPOSAL
Dispose of the packaging materials properly
or cardboard. Contact your local waste-disposal service or environmental authority
for information on the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per the Directive 2002/96/EC of the European Parliament on waste electrical
and electronic equipment and its adaptation into German law
devices must be collected separately and recycled in an environmentally friendly manner
In accordance with the regulations concerning batteries and rechargeable batteries,
disposing of them in the normal household waste is explicitly forbidden. Please
make sure to dispose of your used batteries as required by law — at a local collection
point or in the retail market. Disposal in domestic waste violates the Battery Directive.
Batteries that contain toxins are marked with a sign and a chemical symbol.
1 battery contains cadmium
2 battery contains mercury
3 battery contains lead
