Bedienungsanleitung Ion Party On (Seite 3 von 20) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Finnisch)

617142

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Features

1. Power – Press this button to power Party On on and off.

The power button LED shows the state of the Bluetooth

connection. See the Party On LED activity box for more

details.

Note: Party On will turn itself off after 5 minutes of no

audio playing through either Bluetooth or the aux input.

To continue to use Party On, power on the unit by

pressing the power button. If the Party Light switch is

set to ON, the unit will turn off after 15 minutes (if music

is not playing).

2. Volume Down/Up Controls – Press these buttons to

decrease or increase the volume level for the aux input

and Bluetooth sources. Party On defaults to 2/3 volume

when it is turned on. Please adjust the volume using

your device’s volume controls and Party On’s volume

buttons.

3. Next Track – Press this button to advance to the next

track when listening to Bluetooth sources.

Note: In some apps, pressing the Next button may

advance to the next playlist or music genre.

4. Party Light Switch – Adjust this switch to turn the lights

on and off, or to put Party On into Demo Mode.

When in Demo Mode, pressing the power button:

• powers on the unit (both lights and speaker)

• powers on the unit indefinitely when there is a Bluetooth connection, and music is playing

• powers off a Bluetooth connected unit after 2 minutes if there is no music playing

• powers off the unit after 2 minutes if there is no Bluetooth connection

5. Bluetooth Disconnect – Press this button to disconnect from a previously paired Bluetooth device,

and put Party On back into pairing mode.

6. Battery Charging LED –

This shows the charge status. When charging, it will be on, when fully

charged or not plugged into a charge cable, it will be off.

7. Micro-USB Charging Port – Connect the included micro-USB cable to connect Party On to a USB

power adapter connected to a power outlet or to your computer.

8. Aux Input – Connect the output of an MP3 player or other audio source to this input.

Connecting with a Bluetooth Device

1. Power on Party On.

2. Turn on your Bluetooth device.

3. Navigate to your Bluetooth device’s setup screen, find “Party On” and connect.

Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.

4. Play music and adjust Party On’s volume buttons.

Note: If you experience trouble connecting or playing music, update your device's OS.

5. To disconnect a connected Bluetooth device, press the Disconnect button.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce the

overall volume of Party On.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass

level. This will allow you to play the music louder before clipping (distortion) occurs.

Power Button LED activity:

Solid Red LED = No Bluetooth

connection.

Solid Blue LED = Bluetooth

connected.

Blinking Red LED = Battery is low

and needs to be recharged (no

Bluetooth connection).

Blinking Blue/Purple LED =

Battery is low and needs to be

recharged (Bluetooth connected).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ion Party On Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info