Bedienungsanleitung JVC HR-V520 (Seite 12 von 16) (Englisch)

57355

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

12 EN

7) Press PLAY B / K or STOP C / L repeatedly until the

relevant end hour appears. Next, enter the minute digit.

8) Press

PLAY B / K or STOP C / L repeatedly until the

relevant channel number appears.

9) Press PLAY B / K or STOP C / L repeatedly until the

desired tape speed appears.

10)Press F.FWD g / B . Programme is now completed.

•To set another timer programme, repeat steps

3) to 10).

11)Press

MENU to exit.

12)Press

/I (STANDBY-ON) to activate the timer.

The indicator on the display comes on.

To Stop a Timer Programme which has Already

Started

Press STOP/EJECT C/A on the VCR.

Note: • STOP C / L on the remote control will not function in

the Timer Recording mode.

To Correct Timer Programmes

If you want to correct an automatic timer after you finished

setting programme,

1) Repeat steps

1) to 3) in the “Timer Recording” section on

page 11.

2) Select the setting you want to change using F.FWD g / B

REW h /{.

3) Enter the correct numbers using

PLAY B / K or

STOP C / L, then press F. FWD g / B.

4) Press

MENU to exit.

5) Press

/I (STANDBY-ON) to return to timer standby

mode.

To Cancel or Check the Start/End Time

Repeat steps

in the “Timer Recording”

section

page 11.

2) Select a programme number you want to check using

PLAY B / K or STOP C / L. The details of selected

programme appears on the TV screen. You may cancel the

entire programme by pressing

REW h /{.

3) Press

MENU to exit.

Avoid Overlap of TIMER Programmes...

A timer programme does not work while another programme

is under execution.

Hint for Timer Recording

• If there is a power failure or if the VCR is unplugged for

more than 30 seconds, the clock setting and all timer

settings will be lost.

• If the tape runs out before the end time, the VCR will

switch to the Stop mode immediately, eject the tape and the

VCR power will be turned off. The indicator will flash.

• If a tape is not in the VCR, Timer Recording cannot be

performed and the indicator flashes. If an erase-

prevention tab of the tape is missing, the tape will be

ejected and the indicator will flash. Please insert a

recordable tape.

• When all the Timer Recordings are completed, the

indicator also flashes. To play or eject the recorded tape,

press /I (STANDBY-ON) first, and then press PLAY B / K

EJECT O. To rewind the tape to the beginning of the

recorded programmes, press

AUTO RETURN on the VCR.

• The TV that is connected to your VCR may be turned on

or off when the VCR is in the Timer Recording mode.

• The VCR will only perform a Timer Recording after it has

been placed into timer standby mode.

Auto Return

Using the AUTO RETURN Button

When all the Timer Recordings are completed (the

indicator flashes), press

AUTO RETURN on the VCR first. The

VCR will rewind to the beginning of the recorded

programme(s).

Note: • If there are any remaining programmes, press

/I (STANDBY-ON) to turn on the VCR and then

press AUTO RETURN. In this case, if you press any

other button once and then press

AUTO RETURN,

“Auto Return” will not be carried out.

Using the VCR Menu

If there are any remaining programmes including Daily,

Everyday, & Weekly, “Auto Return” will not operate.

1) Press MENU.

2) Press

PLAY B / K or STOP C / L repeatedly to point to

“SET UP”, then press

F.FWD g / B.

3) Press

PLAY B / K or STOP C / L to point to “AUTO

RETURN”, then press

F.FWD g / B.

“ON” will appear next to “AUTO RETURN”.

4) Press

MENU.

Watch the Recorded Timer Programme

Press /I (STANDBY-ON) to turn on the VCR, then press

PLAY B / K.

Parents Lock

Parents Lock prevents use of the VCR by making the VCR

feature buttons on the VCR and the remote control

inoperative.

• The PWR indicator on the display comes on.

1) Press and hold down

/I (STANDBY-ON) on the remote

control for 5 seconds until “PL” appears on the display.

The Parents Lock is activated.

When you want to cancel it, press and hold

/I (STANDBY-ON) on the remote control again for 5

seconds.

When Parents Lock is activated:

• The time will appear on the display. “PL” will appear on

the display for two seconds every minute.

• You may insert a tape. However, the VCR power will

remain off.

• You may press

EJECT O to remove the tape (unless a Timer

Recording is programmed or has finished).

• Timer Recording will take place as scheduled, even if

Parents Lock is activated. “P.L.” will appear steadily on the

TV screen during the Timer Recording.

QUICK-FIND

This function enables you to search and confirm the contents

of the recorded programme(s) using the index mark.

• Use the remote control for this procedure.

• The tape must be fully rewound.

1) Press

QUICK-FIND.

TIMER

SET UP

INITIAL

TIMER NUMBER

START

END

DATE

CHANNEL

SPEED

--/--

--:--

9:00 10:00 11:00

Programme 1

Programme 2

Programme 3

HM4N0ED(EN).fm Page 12 Friday, January 13, 2006 5:39 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-V520 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC HR-V520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info