Bedienungsanleitung Panasonic TC22LH30 (Seite 38 von 40) (Englisch)

33059

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Troubleshooting

If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the

suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the

model number and serial number (both found on the rear of the TV).

Symptoms

Checks

Antenna location, direction or connection.

Picture Sound

Aerial location, direction or connection.

Electrical appliances.

Cars / Motorcycles.

Fluorescent lights.

Volume level.

Sound mute switched on.

Color controls set at minimum levels.

Weak signal.

Retune Channel (s).

Sound reception may have deteriorated.

Switch STEREO mode (AUDIO ADJUST menu) to Off until reception

improves.

Change the audio of the HDMI device to Linear PCM.

Check the audio setting for HDMI. If there is functional problem with

Digital Audio, use Analog audio.

Noisy Sound

Normal Sound

No Sound

Normal Sound

Noisy Sound

Weak or No Sound

Weak Wrong

or No Sound

Interference

Multiple Image

Normal Picture

No Picture

No Colour

Snowy Picture

Normal Picture

Poor or Distorted Picture

Cannot operate with the remote control.

The battery is exhausted.

The battery’s polarity is wrong.

The remote control sensor is exposed to strong light of a fluorescent

lamp, etc.

The main unit is hot.

The main unit radiates heat and some of the parts may become hot.

This is not a problem for performance or quality.

Set up at a location with good ventilation.

Do not cover the ventilation holes of the TV with a tablecloth etc., and

do not place on top of other equipment.

There may be red spots, blue spots, green

spots and black spots on the screen.

This is a characteristic of liquid crystal panels and is not a problem.

The liquid crystal panel is built with very high precision technology

giving you fine picture details. Occasionally, a few non-active pixels

may appear on the screen as a fixed point of red, blue, green, or black.

Please note this does not affect the performance of your LCD.

TV set to AV mode.

Not plugged into AC outlet.

Not switched on.

Picture / Sound controls set at minimum levels.

Check if in Standby mode.

Make sure that a PC is not connected to HDMI input. The TV may not display

video in HDMI input from devices with HDMI or DVI output due to bad

communication between the TV and the devices. Should this happen, unplug

the HDMI/DVI device and plug it back on.

Poor Video.

(Snow noise, no picture, picture runs, etc.)

Poor Audio.

HDMI cable is not connected securely.

Turn the power supply of the TV set and connected equipment OFF then turn on.

Check compatibility of input signal from the connected equipment.

The connected equipment must be EIA/CEA-861/861B compliant.

Change the audio setting of the connected equipment to L.PCM.

Check the setting of HDMI INPUT.

If the problem is due to the digital audio connection, change to the

analog audio connection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TC22LH30 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info