Bedienungsanleitung Pioneer DEH-1590UB (Seite 3 von 16) (Englisch)

549350

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Display indication

21 3 75

4 6 8

Indicator State

(list)

The list function is being oper-

ated.

Sub infor-

mation sec-

tion

Sub information is displayed.

TA (traffic

announce-

ments)

TA function is on.

TP (traffic

program

identifica-

tion)

A TP station is tuned in.

(sound re-

triever)

The sound retriever function

is on.

6 LOC Local seek tuning is on.

(repeat) Track or folder repeat is on.

(ran-

dom)

Random play is on.

Indicator State

Main infor-

mation sec-

tion

! Tuner: band and fre-

quency

! RDS: program service

name, PTY information

and other literal informa-

tion

! CD player and USB stor-

age device: elapsed play-

back time and text

information

Appears when a lower tier of

folder or menu exists.

Set up menu

When you turn the ignition switch to ON after in-

stallation, set up menu appears on the display.

You can set up the menu options below.

1 After installation of this unit, turn the

ignition switch to ON.

SET UP appears.

2 Turn M.C. to switch to YES.

# If you do not operate for 30 seconds, the set up

menu will not be displayed.

# If you prefer not to set up at this time, turn M.C.

to switch to NO. Press to select.

If you select NO, you cannot set up in the set up

menu.

3 Press M.C. to select.

4 Perform the following procedures to set

the menu.

To proceed to the next menu option, you need to

confirm your selection.

CLOCK SET (setting the clock)

1 Turn M.C. to adjust hour.

2 Press M.C. to select minute.

3 Turn M.C. to adjust minute.

4 Press M.C. to confirm the selection.

FM STEP (FM tuning step)

Normally, the FM tuning step employed by seek

tuning is 50kHz. When AF or TA is on, the tuning

step automatically changes to 100 kHz. It may be

preferable to set the tuning step to 50 kHz when

AF is on.

! The tuning step remains at 50 kHz during man-

ual tuning.

1 Turn M.C. to select the FM tuning step.

50 (50 kHz)—100 (100kHz)

2 Press M.C. to confirm the selection.

MW STEP (MW tuning step)

The MW tuning step can be switched between

9 kHz and 10kHz.

1 Turn M.C. to select the MW tuning step.

9 (9 kHz)—10 (10 kHz)

2 Press M.C. to confirm the selection.

QUIT appears.

5 To finish your settings, turn M.C. to select

YES.

# If you prefer to change your setting again, turn

M.C. to switch to NO. Press to select.

6 Press M.C. to select.

Notes

! You can set up the menu options from the

system menu. For details about the settings,

refer to System menu on page 7.

! You can cancel set up menu by pressing

SRC/OFF.

Basic operations

Important

! Handle gently when removing or attaching

the front panel.

! Avoid subjecting the front panel to excessive

shock.

! Keep the front panel out of direct sunlight

and high temperatures.

! To avoid damaging the device or vehicle inte-

rior, remove any cables and devices attached

to the front panel before detaching it.

English

Operating this unit

Section

Operating this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-1590UB Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info