Bedienungsanleitung Siemens RWC2.1r - 2238 B 1355 (Seite 1 von 2) (Englisch)

620373

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

'-..J'

Do not throw awayl

B 1355

Room Temperature Controller

RWC2.1r/2238

Instructionmanual

The heating controller which you have chosen will ensure

that you have comfortable warmth with uniform room tempera-

ture. During the night and when you are away, it automatically

lowers the room temperature or switches off the heating

completely, depending on the mode of operation which you have

selected.

The unit has several adjusting elements, but do not let this

confuse you. After the unit has been adjusted for the first time,

you will not need to manipulate more than 2 of these switches.

Before setting the unit for the first time, switch off the main

switch for the heating, so that you will be able to try out all

switching positions of the unit without the boiler having to switch

on and off!

Memorize the following well:

The sun symbol stands for all settings which provide a

comfortable temperature; your heating system then

operates In the comfort heating mode.

The moon symbol stands for the level of heating dur-

ing the night and during your absence. This can be a

low level heating or «heating off.. mode.

And now for the actual settings:

Slider A

!;!;~:

:.:.:.::.-

.'.'.',':

I=~

With this slider you can set the temperature which you

desire; this normally lies between 180 C and 200 C.

During the first few days make slight corrections

(warmer or cooler) until the temperature adjusts itself

to the one at which you feel most comfortable. Keep

in mindthat forevery10 C lowertemperature,your

fuel consumption will be lower by approx. 5 %

Comparing temperatures shown on the setting scale with those

indicated on a commercially available room thermometer does

not give valuating criteria because of technical and physical

reasons. You should therefore be guided only by your own feel-

ing of comfort.

Switch B

With this switch you can choose the way in which your heating

system should react when you do not require the comfort of

heating, that is, during the night and when you are away for

several hours or several days.

In switch position «I», the heating system operates in

the saving low level heating mode, which results in a

(approx.) 40 C lower room temperature. This ensures

that your apartment will not cool down too much dur-

ing the night or during your absence, because about

112 to 1 hour after the comfort heating mode begins, the desired

comfortable room temperature is.again reached. Switch to «Iow

level heating» only if there is danger of frost (or if a member of

the household is ill).

In switch position «0»' the heating is shut off comple-

tely during the night or during your absence; that is,

(cbuf1n9 elf,,- Thjs .r.rJDde IswUc./:i pos.i.tiDn «O~) shooJd

be used in Autumn and Spring, because when the out-

side temperature is mild, the apartment will not cool

down excessively, even withou't heating, during the night or dur-

ing an absence of several hours or even several days.

The time switch

The time switch, with a 24-hour scale disc, switches the com-

fort heating mode automatically on and off during a definite per-

iod. During the remaining time there is low level heating or t~e

heating is shut off completely, depending on the position of

switch B. The time at which comfort heating operation begins

and ends can be selected with the «riders» on the time switch:

- the grey rider switches the comfort heating on,

- the black rider switches it off again.

The procedure can take place once or twice during any 24-

hour period. The «double programme» is used when there is no

one at home during the working day, and it would be a waste to

continue the comfort heating operation.

When making the adjustments you should keep in mind the fact

that the heating system requires about a

112 hour to one hour to

bring the room temperature back to its comfortable level after

it has sunk to the night level (or the level reached during the

time of your absence). For this, the comfort heating operation

may end during the evening or even half an hour to one hour be-

fore you go to'bed or before you leave the house for work, be-

cause when this comfort heating operation ends, the room tem-

perature falls slowly, and not suddenly, especially ifyour house

is well insulated and has double-glazed windows.

To adjust the rider, hold the round knob of the time switch firmly

with one hand and with the index finger of the other hand lightly

press the metallic arrow of the rider. This allows the rider to be

shifted easily. As soon as you release your index finger the

rider locks in again at each number, each scale graduation mark

or also between a number and a graduation mark, Le. in 1/4-hour

intervals. It is somewhat more difficult to shift the rider when it is

near to the triangular time mark; in this case, turn the time disc

scale a step further in the clockwise direction until the rider is

out of this zone. Check once again that all riders are locked 'in

their correct positions.

The ckH:k selling is made (}(Ilyafter all fidefs have been set at

the desired times (= switching times). To set the clock, turn the

24-hour time scale disc in the clockwise direction until the cor-

rect time of day is exactly at the triangular time mark. No other

operation is necessary.

Siemens RWC2.1r - 2238 B 1355 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info