545138
2
Zoom out
Zoom in
Vorherige Seite
1/3
Nächste Seite
5
Taking body composition readings
1. Before proceeding, make sure that the platform is within 17feet (5 m) of the remote display.
2. Press
t (User) button to turn the unit on and then press s/t buttons to select personal data number.
(Do not stand on the platform.)
3. Press the SET button to confirm your personal number.
4. When the remote display and platform are paired, the platform will beep once, and the Green Indicator Light will
blink.
5. Step onto the platform while the Green Indicator Light is blinking
.
6. After the measurement is complete, the platform will beep twice, readings will automatically show on the remote
display.
7. Carefully step off platform after measurement is complete.
8. At anytime during and after the Auto Display Process”, the user may use the
s/t buttons to scroll thru the
different results. For advanced scrolling, the user may press and hold s/t button.
Upon reading the desired readings, release the button to view the result, readings will appear for 30 seconds before
the unit automatically shuts off.
Note: For children (age 7-17), the unit will only display the Weight and the Body Fat % (it will not display the Healthy Range
Indicator).
Recall Function
The previous readings of the following features can be obtained using the recall function.
• Weight • Body Fat % • Total Body Water % • Muscle Mass
• BMR/Metabolic Age or DCI/Metabolic Age • Visceral Fat Level
To obtain previous readings, press the SET button while the current readings are being displayed.
The display will show the previous readings. To see other previous readings, press for each desired reading.
Press SET again to go back to the current result display.
Note: For Children (age-7-17), the unit will only display the previous Weight and the Body Fat %.
Programming The Guest Mode
Guest mode allows you to program the unit for a one-time use without resetting a Personal data number.
Press s button to activate the unit. Then follow the steps: Set Age, Select Female or Male, and Specify Height.
Taking Weight Measurement Only
Press the Weight-only key.
Step onto the platform while the Green Indicator Light is blinking.
After the measurement is complete, the platform will beep twice, readings will automatically show on the
remote display. Carefully step off platform after measurement is complete.
Warning
Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical device.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tanita D-1000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info