Code identification
You can read off the 3-digit codes you have OK at any
time:
1. Press the appliance button of the appliance
which code you want to read off, e.g. TV.
2. Press the OK button and 1,2,3 simultaneously,
depending on the part of the code you want to read off.
For example, if you press OK+1 and the code 436 (in
this example) has been set, the lamp blinks 4 times after
OK+1 is pressed to indicate that the hundred figure is 4.
All you have to do is to count. The ten figure is indicated
after pressing OK+2, e.g. it blinks 3 times for the 3 in
436. The one figure is indicated after OK+3 is pressed,
e.g. it blinks 6 times for the 6 in 436.
- There will be no flash in case of 0 indication.
Assigning volume and mute exclusively to one
appliance
Press the appliance button of the appliance that you al-
ways want to use for volume control, e.g. TV. To lock,
press OK + 5. To unlock, press OK + 6.
Reset To Factotry Settings
Press OK+0 button until the lamp blinks twice in order to
reset the remote to factory settings.
Operation
You operate your universal remote control basically in
exactly the same way as if you were using the original
remote control., As the symbols on a universal remote
control could differ from those on the original remote
controls, you may have to try out all the buttons in order
to find the right functions.
Specifications
Batteries: 2x AAA batteries, R03, UM4
Range: max. 7 m
Not for 400 kHz equipment
2-year works guarantee
Should your remote control cease to work within 2 years
of purchasing, you will receive a free replacement from
Vivanco. Exceptions: missing codes, deliberate destruc-
tion and normal wear and tear of the housing and but-
tons.
Vivanco GmbH, D-22926 Ahrensburg, E-Mail: hotline@vivanco.de, Helpline: +49 (0) 4102 231135
