Bedienungsanleitung Watts MILUX 2 230V (Seite 2 von 3) (Englisch)

805548

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

7. Special functions

7.1. HOLIDAY function :

Go to HOLIDAY mode

by using navigation keys (◄) and (►). The

pictogram and the text “no” must flash:

You can adjust the duration. Press (+) or (-) keys to adjust hour number (H) if it is

less than 24 hours, then the day number (d).

With navigation keys (◄) and (►), select the comfort

or reduced

antifreeze

mode. The

pictogram and the remaining number of hours / days

will be displayed until the period’s end:

Once completed, the thermostat will switch on automatic mode

To stop holiday mode before the period’s end, go to HOLIDAY

menu with

navigation keys (◄) and (►).

pictogram and the remaining time flash. Use (-)

key to display “no” and validate with (OK) key.

7.2. Keypad lock

This is a prevention function against any parameter change. It is valid in comfort

, automatic

, reduced

and antifreeze

mode.

To lock the keypad, maintain (OK) key pressed then press on (-) or (+) keys.

is displayed.

To unlock the keypad, maintain (OK) key pressed then press on (-) or (+) keys.

is displayed.

7.3. Cooling function :

You can use your MILUX2 230V to control a cooling system (air-conditioner…). To

change thermostat operating mode, move the cursor on the comfort menu

with navigation keys (◄) and (►). Then, maintain (OK) key pressed and press

simultaneously on (◄) key. One of the below screens must appear:

Use (+) or (-) keys to modify the operating mode. Press (►) key to come back to

the main screen and to validate your selection.

In cold mode “COLD”, the antifreeze mode is removed.

7.4. RESET function :

This function is used to erase all programs and to restore the default

manufacturing parameters.

Go to ANTIFREEZE menu , maintain (OK) key pressed during 10 seconds. All

display’s segments will light up. It will demonstrate that the thermostat is in reset

phase. Once completed, the thermostat restarts in the delivery configuration with

the following default settings:

 U1 to U4 programs reset all in comfort.

 In heating mode :

Setting temperatures:

21°C,

17°C,

6°C.

 In cooling mode:

Setting temperatures:

22°C,

24°C

WARNING: Remember to adjust time value after the reset (see chapter

6.1)

8. ITCS function (optional)

Your thermostat has an Intelligent Temperature Control System (ITCS). It will

activate your installation in advance to ensure the desired temperature at the hour

programmed following your weekly program.

To operate, this Intelligent Temperature Control System realizes automatically

several time measurements. When you switch on your thermostat for the first time,

a time measurement taken to reach the setting temperature is realized. This time

will be adjusted by new measurements at each program change to adapt with

outside temperature evolution. Then, you can program your thermostat without

advancing the switch on times because it will be done automatically for you.

9. Technical characteristics

Environment. (Temperatures)

Operating temperature:

Transport and storage :

0°C - 40°C

-10°C to +50°C

Measurement precision

0.1°C

Set temperature range :

Comfort and Reduced

Antifreeze

5°C - 35°C by 0,5°C step

0,5 - 10°C by 0,5°C step

Regulation characteristics

Cycle (PWM): 15 minutes for 2°C with

Anti-short cycle of 3 minutes in OFF and 2

minutes in ON.

Electrical Protection

Class II - IP30

Power supply

230VAC

Sensible elements:

Internal

NTC 10k ohms at 25°C

Connection

3 points screw connector in the bottom of

the case

Max. switching current/voltage

5A/400 VAC resistive

CE Directives

Your product has been designed

in conformity with the European

Directives.

EMC 2004/108/EC

RoHS 2011/65/EU

Product conformed to :

Classification :

Contribution :

UE 811/2013 and 2010/30/UE

(2%)

10. Problems and solutions

My thermostat doesn’t switch on

Power supply

problem

- Check the power supply

My thermostat displays an error message

Sensor problem

The message Err is displayed and the

pictogram

flashes (ambient sensor)

My thermostat seems to operate correctly but the heating doesn’t function

correctly

Output

- Check the receiver connections.

- Check the power supply of the heating element.

In case of persistent problems, contact your installer or seller.

11. Recycling

Electrical and electronic out of order appliances must be collected

separately by using specific systems in your country.

12. Annexes

Comfort =

Reduced =

= daily version

PPLIMW15373Aa

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Watts MILUX 2 230V Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info