Bedienungsanleitung Whirlpool FSCR 10433 (Seite 4 von 8) (Englisch)

607070

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

SORT YOUR LAUNDRY ACCORDING TO

• Type of fabric / care label (cotton, mixed bres, synthetics, wool,

handwash items)

• Colour (separate coloured and white items, wash new coloured

articles separately)

• Size (wash items of dierent sizes in the same wash load to

improve washing eciency and distribution in the drum)

• Delicates (wash small items – like nylon stockings – and items with

hooks – like bras – in a cloth bag or pillow case with zip.

EMPTY ALL POCKETS

• Objects like coins or safety pins can damage your laundry as well

as the drum.

WASH CARE LABELS

The temperature in the washtub symbol indicates the maximum

possible temperature for washing the item.

Normal mechanical action

Reduced mechanical action

Much reduced mechanical action

Hand wash only

Do not wash

CLEAN THE WATER FILTER REGULARLY

• Helps to avoid that it can get clogged and that the drain water

cannot be pumped out anymore. Refer to section CARE AND

MAINTENANCE / “Cleaning the water lter” in the Use and Care

guide.

SAVINGS AND ENVIRONMENT

• Achieve the best use of energy, water, detergent and time by

using the recommended maximum load size for the programmes,

as indicated in the programme chart.

• Do not exceed the detergent dosages indicated in the detergent

manufacturer’s instructions. Use the Auto dosing function.

• Save energy by using a 60 °C instead of a 95 °C wash programme

or a 40 °C instead of a 60 °C wash programme. For cottons, the Eco

Cotton

programme at 40 °C or 60 °C is recommended.

• Save energy and time by selecting a high spin speed to reduce the

water content in the laundry before using a tumble dryer.

HINTS AND TIPS

SETTINGS

The following settings can be changed / selected:

Display language / key tones / cycle end alert/ display contrast /

water hardness / eco mode (automatic switch-o function after

programme end) / dispenser on or o (permanently enable or

disable automatic detergent dosing) / calibration (adapt dosing

amount of the Tanks to the recommendations of your detergent or

softener) / Tank 2 content (= set Tank 2 to detergent or softener) /

return to factory settings.

• Press the Settings button.

• Select the setting which you want to change by pressing the UP or

DOWN key. Afterwards press the OK key.

• Press the UP or DOWN key to set the desired value or choose from

the menu, afterwards conrm by pressing the OK key.

• To exit the Settings mode, either press UP or DOWN key until the

display indicates that you can exit – then conrm by pressing the

OK key. Or wait for a few seconds until the Settings mode will be

ended automatically.

• Press the relevant button (for example the “Spin speed” button to

change the spin speed). The display indicates that the value can

be set.

• Press the UP or DOWN key to adjust the value. For options

selectable with the options button: press UP or DOWN key to

select an option; afterwards press the OK key to conrm or

deselect the option.

The programme will continue automatically.

To change the settings of a running programme, you can also

• Press “Start/Pause” to pause the running programme

• Change your settings

• Press “Start/Pause” again to continue the programme.

9. PAUSE A RUNNING PROGRAMME AND OPEN THE

DOOR, IF NEEDED

• Press and hold “Start/Pause” to pause a running

programme.

• Provided water level is not too high, or laundry is not too

hot, the door indicator lights up. You can open the door,

for example to add/remove laundry.

• Close the door again and press “Start/Pause” to proceed

with the programme.

10. RESET A RUNNING PROGRAMME, IF NEEDED

• Press and hold the “On/O” button until the display

indicates that the programme is cancelled.

The water drains, the programme ends and the door

unlocks.

11. SWITCH OFF THE WASHING MACHINE AFTER

PROGRAMME END

• The display indicates that the cycle has ended, and the

“Door open” indicator lights up – you can take out your

laundry

• Press “On/O” to switch o the washing machine. If you do not

switch it o, the washing machine will switch o automatically

after about a quarter of an hour after programme end, to save

energy.

• Leave the door ajar, so that the inside of the washing machine can

dry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FSCR 10433 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FSCR 10433

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info