Bedienungsanleitung Whirlpool Hudson 1400 (Seite 2 von 2) (Englisch)

470504

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

5019 301 06484

Whirlpool is a registered trademark of Whirlpool USA

Add detergent as indicated on the front page and as described in

the chapter “Detergent and Additives” in your Instructions for Use.

•Turn the programme selector to the desired programme and

temperature. The display shows the programme duration and

the predefined spin speed. The lamp next to the “Start/

Pause” button blinks.

Push the button of any option desired - the respective indication lights up.

If the combination of programme and option is not possible, the

indication lights switch off automatically. Unsuitable combinations

of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt).

Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when selecting

“Prewash”.

“Rapid” button

• Enables quicker washing by shortening the programme duration.

• Recommendable for small loads or only lightly soiled laundry.

“Clean +” button

• Choose this option if you use an in-wash additive for stain removal

(powder, for example “Vanish”) - it will optimize the additive’s

efficiency to get better wash performance and stain removal.

• Use with maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together with

your detergent (only use powder detergent with this option).

Respect the manufacturer’s dosing instructions.

• May prolong the programme by up to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen

basis. Chlorine or perborate bleaches must not be used!

“Cold wash” button

• Water is heated only up to 20°C.

• Suitable for delicate laundry items with wash temperature

recommendation of max. 30° on the care label.

• Mainly selectable on the lowest temperature step of the

programmes only.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

water, washing baby linen and helping people with allergies.

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very

gentle spin.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and prevent

colours from changing.

CONSUMPTION DATA

Programme Te m p e r a t u r e

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approximate programme duration

(hrs.min)

without “Rapid” with “Rapid”

Cotton 95 6.0 59*** 1.90 2:00 —

Cotton* 60 6.0 49 0.78 4:00 2:30

Cotton* 60 3.0 37 0.70 2:30

Cotton 40 6.0 60 0.70 2:45 1:45

Cotton* 40 3.0 37 0.60 2:30

Jeans 40 5.0 76 0.70 3:00 2:00

Synthetics 60 3.0 50*** 0.80 1:35 1:14

Synthetics 40 3.0 46 0.50 1:20 0:59

Delicates 30 1.5 60 0.50 0:45 —

Daily load 40 3.0 41 0.50 1:00 —

Quick wash 30 3.0 41 0.40 0:30 —

Wool 40 1.0 60 0.50 0:45 —

Wool 20 1.0 60 <0.10 0:40 —

Handwash 40 1.0 45 0.50

0:40 —

Lingerie 30 1.0 45 0.40

0:36 —

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with

respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer

to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

* Reference programmes for Energy Label.

** Automatic adaption of programme duration after detection of wash load.

*** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

• Particularly useful if you want to postpone spinning to a later

time, or if you want to drain only.

Note: The programme stops to “Rinse hold” at the time the

“Rinse hold” light in the programme sequence indication is on. The

indication lamp next to the “Start/Pause” button blinks.

Terminate the “Rinse hold” option :

• Press the “Start/Pause” button ; the programme will terminate

automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme

selector to the “Drain” programme and press the “Start/

Pause” button .

“Spin” button

• Every programme has a predefined spin speed; press the

button if you want to set a different spin speed.

• If spin speed “0” is selected, the final spinning is cancelled and

the water is drained out only. However, intermediate spin

peaks remain during rinse.

The “Start delay” allows to run the machine at the consumer’s

convenience, for example at night when electricity is cheaper. Do

not use liquid detergent when activating “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the desired delay time

between 30 minutes and 23 hours.

• Press the “Start/Pause” button .

On the display, the start delay symbol and the dot between hours

and minutes blink. The countdown of the delay time begins.

•The delay time indication disappears when the programme

starts and it is replaced by the remaining programme duration.

• Once having pressed the “Start/Pause” button , the delay

time can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay”

• Turn the programme selector to another position, or press the

“Start/Pause” button - the selected start delay

disappears from the display. Press “Start/Pause” again if

you want to start the selected programme immediately.

Open the tap and press the “Start/Pause” button . The

indication lamp next to the “Start/Pause” button lights up.

The programme sequence indicator shows the current programme

phase, running from left to right through Wash, Rinse, Drain/Spin.

Before starting and after end of a programme, the lamp lights to show

that the door can be opened. As long as a wash programme is running,

the door remains locked and must on no account be forced open. In

case you have an urgent need to open it during a running programme,

refer to “Cancel a running programme before the end”.

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an

electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water

tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or

the filter must be cleaned (see “Cleaning the filter” in your

Instructions for Use).

• All the lights of the programme sequence indicator are off

and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the “Start/Pause” button to pause the

programme. The light blinks.

2. Select the new programme and, if you want, another spin

speed and any options.

3. Press the “Start/Pause” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add detergent

for this programme.

The “Reset” button cancels a programme before the end.

•Press and hold the “Reset” button for a few seconds.

Any existing water is drained out. It may last some time until

the door can be opened.

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATION

FAILURE INDICATIONS

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

CANCEL A RUNNING PROGRAMME

BEFORE THE END

30106484GB.fm Page 2 Friday, May 13, 2011 5:24 PM

Black process 45,0° 150,0 LPI

Whirlpool Hudson 1400 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool Hudson 1400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info