534678
6
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
UP Plus
3D Printer User Manual
1.2.2 The
following
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate
WARNING: Indicates a potentially hazardous situation which, if not avoided, may
result in serious injury.
Gloves: When performing certain maintenance procedures, the machine may be hot
and gloves are required to avoid burns.
Safety
Glasses: Wear safety glasses to avoid injury to your eyes.
1.2.3 Protection
The printer must not be
exposed to
Do not shut down the UP
System
model data may be lost.
When using the
“Extrudefunction, keep
too close, the nozzle may get
blocked.
The printer is designed to
work properly
humidity of
between 20% and 50%
els.
1.2.4 3D Printer burn in test
Before shipping y
our printer has undergone
screen that it reports several KG’s of us
factory.
1.2.5 Status Indicators
LED State
2.
3D Printer User Manual
v 2013.6.10
following
classifications are used in this
manual
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate
injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, may
result in serious injury.
Gloves: When performing certain maintenance procedures, the machine may be hot
and gloves are required to avoid burns.
Glasses: Wear safety glasses to avoid injury to your eyes.
exposed to
water or rain, or damage may occur.
System
or pull out the USB cable when loading a
digital
“Extrudefunction, keep
at least 50mm
between the nozzle and the
blocked.
work properly
at an ambient temperature of
between 15
between 20% and 50%
; Operating outside these limits may
result in low quality
1.2.4 3D Printer burn in test
our printer has undergone
a thorough test. Y
ou will notice in the maintenance
screen that it reports several KG’s of us
age
, this is normal and from testing prior to leaving the
1.2.5 Status Indicators
Indicates
Solid Red
Printer is not intilised
Solid Green
Printer is ready
2.
Overview
manual
.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
WARNING: Indicates a potentially hazardous situation which, if not avoided, may
Gloves: When performing certain maintenance procedures, the machine may be hot
digital
model, or the
between the nozzle and the
platform. If
between 15
°C and 30°C and
result in low quality
mod-
ou will notice in the maintenance
, this is normal and from testing prior to leaving the
Printer is not intilised
Printer is ready
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für 3Dprintingsystems UP Plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info