Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
User’s Manual
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    User’s Manual



  • Page 2

    3M™ Mobile Projector MP410

    Safety Instructions...........................................................................................................4
    Important Notice..................................................................................................................... 4
    Technical Support Contact..................................................................................................... 4
    Intended Use Statement......................................................................................................... 4
    Safety Information................................................................................................................... 4
    Safety Labels.......................................................................................................................... 6
    Limited Warranty..................................................................................................................... 7
    Trademarks............................................................................................................................. 9
    Video and Audio Decoder Notices.......................................................................................... 9
    Regulatory Notices............................................................................................................... 10
    CE Statement....................................................................................................................... 11
    WEEE Statement.................................................................................................................. 11
    RoHS Statement................................................................................................................... 11

    Introduction.....................................................................................................................12
    Package Contents................................................................................................................ 12
    Optional Contents................................................................................................................. 12
    About Your Projector............................................................................................................ 13
    Main Unit.................................................................................................................. 13
    Input / Output Connections...................................................................................... 14
    Control Panel........................................................................................................... 15
    Remote Control (Optional)....................................................................................... 16
    Installing the Remote Control Battery (Optional)...................................................... 17
    Operating Range with Remote Control (Optional)................................................... 17

    Installation.......................................................................................................................18
    Connecting to a Computer.................................................................................................... 18
    Connecting to a DVD Player................................................................................................. 19
    Connecting to Multi-Media.................................................................................................... 20
    Turning On/Off the Projector................................................................................................. 21
    Turning Your Projector On....................................................................................... 21
    Turning Your Projector Off....................................................................................... 21
    Adjusting the Projected Image.............................................................................................. 22
    Raising the Projector Height.................................................................................... 22
    Lowering the Projector Height.................................................................................. 22
    Adjusting the Projector Focus.................................................................................. 22
    Adjusting Projection Image Size.............................................................................. 23

    User Controls..................................................................................................................25
    Using the On-Screen Display............................................................................................... 25
    Main Menu............................................................................................................................ 25

    © 3M 2012. All Rights Reserved.

    

    English

    Contents



  • Page 3

    English

    3M™ Mobile Projector MP410
    Language................................................................................................................. 25
    Source...................................................................................................................... 26
    Video Mode.............................................................................................................. 27
    Audio........................................................................................................................ 27
    Auto Adjust............................................................................................................... 28
    OSD Reset............................................................................................................... 28
    Advanced................................................................................................................. 28
    SN............................................................................................................................ 28
    FW Version............................................................................................................... 28
    Advanced Menu.................................................................................................................... 29
    Display (In PC Mode)............................................................................................... 29
    Display (In Video Mode)........................................................................................... 30
    Image (In PC Mode)................................................................................................. 31
    Image (In Video Mode)............................................................................................. 31
    Power....................................................................................................................... 33
    Multi-Media Introduction....................................................................................................... 36
    Photo Format........................................................................................................... 36
    Video Format............................................................................................................ 36
    Audio Format............................................................................................................ 36
    How to set-up File Type for Multi-Media with USB................................................... 37
    How to set-up File Type for Multi-Media with MicroSD............................................ 38
    How to set-up File Type for Multi-Media with Internal Memory................................ 39
    Multi-Media Main Menu............................................................................................ 40
    Multi-Media SETUP for USB, MicroSD, and Internal Memory................................. 40
    Photo Setup............................................................................................................. 41
    Video Setup.............................................................................................................. 42
    Music Setup............................................................................................................. 43
    Firmware Update...................................................................................................... 44

    Appendices.....................................................................................................................45
    Troubleshooting.................................................................................................................... 45
    Guiding Signals........................................................................................................ 47
    Compatibility Modes (Analog/Digital).................................................................................... 48
    Specifications........................................................................................................................ 49

    

    © 3M 2012. All Rights Reserved.



  • Page 4

    3M™ Mobile Projector MP410

    English

    Safety Instructions
    Important Notice
    All statements, technical information, and recommendations related to 3M’s products are
    based on information believed to be reliable, but the accuracy or completeness is not
    guaranteed. Before using this product, you must evaluate it and determine if it is suitable
    for your intended application. You assume all risks and liability associated with such use.
    Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force
    or effect unless expressly set forth in a written agreement signed by an authorized officer
    of 3M.

    Technical Support Contact
    For technical support, call 1-866-631-1656 or email meetings@mmm.com

    Intended Use Statement
    The 3M Mobile Projector MP410 is designed to operate with the 3M power adapter and
    3M I/O cables in normal office or home environments.




    Operation temperature:
    -

    For 0 - 2500 ft, 5 - 35 °C
    For 2500 - 5000 ft, 5 - 30 °C
    For 5000 - 10000 ft, 5 - 25 °C

    -

    Operating: 5°C ~ 35°C, 80%RH (Max.), Non-condensing
    Storage: -20°C ~ 60°C, 80%RH (Max.), Non-condensing

    Maximum Humidity:

    The ambient operating environment should be free of airborne smoke, grease, oil and
    other contaminants that can affect the operation or performance of the projector.
    Use of this product in adverse conditions will void the product warranty.

    Safety Information
    Please read, understand, and follow all safety information contained in these instructions
    prior to the use of this projector. Retain these instructions for future reference.

    Explanation of Signal Word Consequences
    Warning:

    Indicates a potentially hazardous situation, which, if not avoided,
    could result in death or serious injury and/or property damage.

    Caution:

    Indicates a potentially hazardous situation, which, if not avoided,
    may result in minor or moderate injury and/or property damage.

    Warning:

    Hazardous voltage

    © 3M 2012. All Rights Reserved.

    



  • Page 5

    English

    3M™ Mobile Projector MP410

    Warning
    To reduce the risk associated with hazardous voltage:


    Do not modify this product in any way. Use only 3M approved replacement components.



    Do not attempt to service this projector.



    There are no user-serviceable parts. Service to be performed only by a 3M authorized service provider using 3M approved system components.



    Do not use the wall power supply in a wet environment.



    Do not use with a damaged wall power supply. Replace damaged part prior to use.

    To reduce the risk associated with fire and explosion:


    Do not immerse the projector in any liquid or allow either to get wet.



    Use only 3M approved power supply.

    To reduce the risks associated with choking:


    Keep all small parts like the remote control battery away from young children and
    pets.

    To reduce the risk associated with hazardous voltage, impact, tripping, and
    intense visible light:


    Do not use this projector around unsupervised children.
    Caution

    To reduce the risks associated with hearing loss:


    Be sure to read earphone manufacturer's instructions with respect to volume level.



    User is responsible to set a safe volume level.

    To reduce the risk associated with explosion, and/or chemicals from a leaking
    batteries:

    



    Use only with battery type CR2025.



    Orient the battery's plus (+) and minus (-) terminals of the batteries according to
    the markings found on the remote control.



    Do not leave the battery in the remote for an extended period of time.



    Do not heat or expose the battery to fire.



    Do not disassemble, short, or recharge battery



    Do not carry batteries loose in your pocket or purse.



    Avoid eye and skin contact in the event that battery leaks.



    Do not recharge the battery near a heat source or in extremely hot conditions.

    © 3M 2012. All Rights Reserved.



  • Page 6

    3M™ Mobile Projector MP410

    English

    To reduce the risk associated with environmental contamination:


    Dispose of all system components in accordance with applicable government
    regulations.

    To reduce the risks associated with LED bright light:


    Do not stare directly into the projector lens.

    To reduce the risks associated with tripping and falling:


    Position the charging cord and data cables so that they are not a tripping hazard.

    IMPORTANT NOTE: Do not expose the projector to direct sunlight in a closed space such as a
    vehicle.

    SAVE THESE INSTRUCTIONS

    25
    20

    LT

    R

    O

    2 - L iC E LL 3 V

    C

    M nO

    S J A PA N H

    Safety Labels

    Remote Control (Optional)
    Model No. IR28012

    Spec Label

    © 3M 2012. All Rights Reserved.

    



  • Page 7

    English

    3M™ Mobile Projector MP410

    Limited Warranty
    This warranty applies to the continental US only. The warranty terms, conditions, remedy
    and limitation may vary in other countries. Contact your local 3M Company for warranty
    information.


    The 3M™ Mobile Projector MP410 (the “3M product”) is warranted to be free from defects in
    material or manufacture for a period of 2 year from the date of purchase.



    All other accessories included with the 3M product are warranted to be free from defects in
    material or manufacture for a period of 1 year from the date of purchase.



    Optional product accessories that are not sold as part of the 3M product are subject to individual
    warranties.

    THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE
    OF ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
    FOR A PARTICULAR PURPOSE, OR ANY INDUSTRY PRACTICE OR CUSTOM OR
    TRADE USAGE.
    In the event the 3M product fails to conform to the above stated warranties within the
    applicable warranty period, your exclusive remedy shall be, at 3M’s option, to replace
    or repair the 3M product or to refund the purchase price of the 3M product. All replaced
    parts or products become property of 3M. If the product is repaired, 3M will repair the
    defective part(s) with a new or used part(s). If the 3M product is replaced, 3M will replace
    the 3M product with the same or equivalent model and with a new or refurbished 3M
    product. In the case of an approved warranty claim, the replacement 3M product will
    carry only the remaining term of the original 3M product’s warranty period as stated
    above. For warranty service, you must provide proof of the date of the original purchase
    else the manufacturing code date will be used to establish the start date of the warranty.
    The following are exclusions to the above listed warranty:
    a. This warranty does not cover 3M product that is modified or damaged through improper storage,
    misuse, abuse, accident, vandalism, improper installation, neglect, improper shipping, damage
    caused by acts of war, disasters such as fire, flood, and lightning, improper electrical current,
    software problems, interaction with non-3M products, or service other than by an 3M Authorized
    Service Provider, neglect or mishandling by any person. Normal wear and tear is not covered
    under warranty.
    b. 3M product is designed to operate in the typical indoor environment. This warranty does not
    cover 3M product used outside of the following circumstances:
    Operation temperature:
    - For 0 - 2500 ft, 5 - 35 °C
    - For 2500 - 5000 ft, 5 - 30 °C
    - For 5000 - 10000 ft, 5 - 25 °C
     Maximum Humidity:
    - Operating: 5°C ~ 35°C, 80%RH (Max.), Non-condensing
    - Storage: -20°C ~ 60°C, 80%RH (Max.), Non-condensing
    c. The air intake and exhaust vent must be clear of obstructions. Inadequate air ventilation will
    cause the 3M product to malfunction or will cause damage to the 3M product which will void the
    warranty.


    d. This warranty does not cover any additional costs including, but not limited to, those associated
    with removal, cleaning or installation of the 3M product, adjustments, (mechanical or electronic)
    made to the 3M product.

    

    © 3M 2012. All Rights Reserved.



  • Page 8

    3M™ Mobile Projector MP410

    English

    e. This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes strain and is not considered normal use.
    f. This warranty does not cover consumables (e.g., batteries).
    g. This warranty is not transferable.
    h. 3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed unless otherwise stated in writing for the purposes of private labeling
    for partnership requirements.
    i. This warranty does not cover postage, insurance, or shipping costs incurred in presenting your
    3M product for warranty service. Said costs are the customer’s responsibility. If a claimed defect
    cannot be identified or reproduced in service, the customer may be held responsible for cost
    incurred. Should your warranty upgrade include a “change out” service and the claimed defect
    cannot be identified or reproduced by the technician, the customer will be responsible for call
    out costs.

    FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE
    3M PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE WITH
    3M’S INTENDED USE STATEMENT, WILL VOID ALL WARRANTIES AND LIMITED
    REMEDIES.
    EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL,
    3M SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS,
    REVENUE OR BUSINESS) RESULTING FROM, OR IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This limitation
    applies regardless of the legal theory upon which damages are sought.
    For warranty support, please call or write your local 3M office or a 3M Authorized Service
    Provider to obtain an RMA # (Return Material Authorization number) before returning the
    product. If you are inside the Continental United States of America, please contact 3M
    Customer Service at 1-866-631-1656 or email meetings@mmm.com.
    What 3M Will Do To Correct Problems:


    If your 3M product requires service, 3M will ask you to bring or send the 3M product, securely
    packaged in its original container or equivalent, along with proof of the date of original purchase,
    to your 3M Service Dealer or 3M Service Center.



    3M will, at its option, repair or replace the defective unit without charge for parts or labor. Return
    of the 3M product will be at 3M’s expense.



    When warranty service involves the exchange of the 3M product or of a part, the item replaced
    becomes 3M property.



    The exchanged 3M product or part may be new or previously refurbished to the 3M standard of
    quality, and at 3M’s option, the replacement may be another model of like kind and quality.



    3M’s liability for replacement of the warranted 3M product or part will not exceed the original
    retail selling price of the 3M product. Exchange or replacement products or parts assume the
    remaining warranty period of the product covered by this limited warranty.

    © 3M 2012. All Rights Reserved.

    



  • Page 9

    English

    3M™ Mobile Projector MP410

    Trademarks
    3M and the 3M logo are trademarks of 3M Company. Adobe and the Adobe logo are
    either registered trademarks or trademarks of Adobe Systems Incorporated in the United
    States and/or other countries. Microsoft, PowerPoint, and Excel are registered trademarks of Microsoft Corporation. microSD and microSDHC are trademarks of the SD
    Association.
    All other trademarks or registered trademarks are property of their respective companies.

    Video and Audio Decoder Notices
    MPEG-4 NOTICE
    THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO
    LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER
    FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD
    ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED
    BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY
    AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO
    PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
    ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO
    PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE
    OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
    AVC VIDEO NOTICE
    THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE
    FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR
    (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A
    PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
    VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED
    OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY
    BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM.
    MPEG LAYER-3 NOTICE
    Supply of this product does not convey a license nor imply any right to distribute MPEG
    Layer-3 compliant content created with this product in revenue-generating broadcast
    systems (terrestrial, satellite, cable and/or other distribution channels),streaming applications (via Internet, intranets and/or other networks), other content distribution systems
    (pay-audio or audio-ondemand applications and the like) or on physical media (compact
    discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the
    like). An independent license for such use is required.
    For details, please visit http://mp3licensing.com.

    

    © 3M 2012. All Rights Reserved.



  • Page 10

    3M™ Mobile Projector MP410

    English

    Regulatory Notices
    FCC STATEMENT - CLASS B
    This equipment generates, uses and can radiate radio frequency energy, and if not
    installed and used in accordance with the instruction manual may cause interference to
    radio communications. It has been tested and found to comply with the limits for a Class
    “B” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are
    designed to provide reasonable protection against such interference when operated in
    a residential installation. However, there is no guarantee that interference will not occur
    in a particular installation. If this equipment does cause harmful interference to radio
    or television reception, which can be determined by turning the equipment off and on,
    the user is encouraged to try to correct the interference by one or more of the following
    measures:


    Reorient or relocate the receiving antenna.



    Increase the separation between the equipment and receiver.



    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.



    Consult the dealer or an experienced radio/TV technician for help.

    NOTICE: This Class B digital apparatus complies with Canadian ICES-003.
    Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
    Industry Canada regulatory information
    Operation is subject to the following two conditions:
    (1) this device may not cause interference, and
    (2) this device must accept any interference, including interference that may cause undesired operation of the device.
    The user is cautioned that this device should be used only as specified within this
    manual to meet RF exposure requirements. Use of this device in a manner inconsistent
    with this manual could lead to excessive RF exposure conditions.
    This Class [B] digital apparatus complies with Canadian ICES-003.
    Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
    INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC
    equipment provided that the following conditions are met. If the cables include a EMI
    ferrite core, attach the ferrite core end of the cable to the projector. Use the cables which
    are included with the projector or specified.
    Note: Changes or modifications not expressly approved by the party responsible for
    compliance could void the user’s authority to operate the equipment.
    Complies with IDA Standards DA103121

    © 3M 2012. All Rights Reserved.

    



  • Page 11

    English

    3M™ Mobile Projector MP410

    CE Statement
    ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive
    Low Voltage Directive: Meets 2006-95-EC Directive.

    WEEE Statement
    The following information is only for EU-members States:
    The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose
    the equipment as unsorted municipal waste, but use the return and collection systems
    according to local law.

    RoHS Statement
    3M Mobile Interactive Solutions can provide RoHS certification for products meeting the
    RoHS directive.1
    European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC,
    1

    RoHS compliant means that the product or part does not contain any of the substances in excess
    of the following maximum concentration values in any homogeneous material, unless the substance
    is in an application that is exempt under RoHS, as amended:(a) 0.1% (by weight) for lead, mercury,
    hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by
    weight) for cadmium. This information represents 3M’s knowledge and belief, which may be based
    on information provided by third party suppliers to 3M.

    10

    © 3M 2012. All Rights Reserved.



  • Page 12

    3M™ Mobile Projector MP410

    English

    Introduction
    Package Contents
    Your projector comes with all the items shown below. Ensure that you have all
    the items, and contact your local reseller or service center if anything is missing.

    Projector

    Power cable

    AC adapter

    Universal 24-pin to VGA
    cable

    CD operator’s guide
    and documentation

    Carrying case

    Optional Contents

    Remote control
    NOTE: The remote control is shipped without battery.

    © 3M 2012. All Rights Reserved.

    11



  • Page 13

    English

    3M™ Mobile Projector MP410

    About Your Projector
    Main Unit

    1

    2

    3

    4

    5

    #

    Description

    1

    Control panel

    2

    Focus ring

    3

    Lens

    4

    Input / Output connections

    5

    Tilt adjusting wheel

    12

    © 3M 2012. All Rights Reserved.



  • Page 14

    3M™ Mobile Projector MP410

    English

    Input / Output Connections
    1

    2

    USB-A
    Micro SD

    Universal I/O

    HDMI

    A/V in
    DC in

    7

    6

    5

    4

    #

    Description

    1

    MicroSD card slot

    2

    USB Type A connector

    3

    DC input connector

    4

    Audio/Video input connector

    5

    HDMI connector

    6

    Universal I/O connector

    7

    Security cable slot

    © 3M 2012. All Rights Reserved.

    3

    13



  • Page 15

    English

    3M™ Mobile Projector MP410

    Control Panel

    1

    9
    2
    8

    3
    4

    7

    5
    6

    2

    #

    Name

    Description

    1

    Power

    Turns the projector on or off.

    2

    Keystone adjustment

    Press to adjust image distortion caused by tilting the projector
    (+/-40 degrees).

    3

    Auto adjust

    Press to synchronize the projector to the input source.
    NOTE: Auto Adjust does not operate if the on-screen display (OSD) is
    displayed.

    4

    Error LED

    Error LED is blinking amber, one of the fans has failed. The projector will automatically shut down.

    5

    Temp LED

    If the TEMP amber indicator is on or blinking, one of the following
    problems could be occurring:


    Internal temperature of the projector is too high.

    6

    Menu

    Press to activate the OSD. Use the directional keys and the Menu
    button to navigate through the OSD.

    7

    Source

    Press to enter Source menu and select an input source.

    8

    Enter

    Press to confirm the selection item.

    9

    Four Direction- Press to navigate through the On-Screen Display (OSD) Menu
    al Select Keys items.

    14

    © 3M 2012. All Rights Reserved.



  • Page 16

    3M™ Mobile Projector MP410

    English

    Remote Control (Optional)

    1

    10

    2
    3

    11
    12

    4
    5

    13

    6

    14

    7
    8
    9

    © 3M 2012. All Rights Reserved.

    #

    Name

    Description

    1

    Power

    Turns the projector on or off.

    2

    Source

    Press to enter Source menu
    and select an input source.

    3

    Aspect Ratio

    Press to change aspect ratio
    of a displayed image.

    4

    Enter

    Press to confirm the selection.

    5

    Volume up

    Press to increase the volume.

    6

    Volume down

    Press to decrease the
    volume.

    7

    Menu

    Press to activate the OSD.

    8

    Play/Pause

    Press to play/pause media
    file.

    9

    Mute

    Press to mute or un-mute
    the projector speaker.

    15

    10 Video mode

    Press the Video Mode
    button to toggle between
    Bright mode, Movie mode,
    PC mode, User mode, or
    Presentation mode.

    11 Blank screen

    Press to hide/unhide the
    image.

    12 Up/Down/Left/
    Right

    Press to navigate through
    the On-Screen Display
    (OSD) Menu items.

    13 Keystone adjustment
    14

    Press to adjust image distortion caused by tilting the
    projector (+/-40 degrees).

    15 Stop

    Press to stop playing media
    file.

    15



  • Page 17

    Installing the Remote Control Battery (Optional)

    25

    LT

    C
    R
    20

    2. Insert a CR2025 coin cell battery and align the polarity
    correctly according to the marking in the battery holder.

    S

    . Remove the battery holder by holding down the side
    release firmly and pulling out the battery holder.

    S

    25

    LT

    3V

    O

    NOTE: When you use the remote control for the first time, there
    is a plastic sheet between the battery and its contact. Remove
    the sheet before use.

    O

    3V

    C
    R
    20

    25
    20

    LT

    R

    3V

    O

    M

    S

    3. Replace the battery holder.

    C

    English

    3M™ Mobile Projector MP410

    Operating Range with Remote Control (Optional)

    ±20°

    7 m/22.97 feet

    NOTE: Actual operating range may slightly differ from the diagram. Additionally, a weak battery
    reduces or eliminates the operating range of the remote control.

    16

    © 3M 2012. All Rights Reserved.



  • Page 18

    3M™ Mobile Projector MP410

    English

    Installation
    Connecting to a Computer
    1

    5

    3

    4
    2

    USB-A
    Micro SD

    Universal I/O

    HDMI

    A/V in
    DC in

    #

    Description

    1

    Power cord

    2

    AC adapter

    3

    Universal 24-pin to VGA cable

    4

    HDMI cable *

    5

    USB-A to USB-A cable *

    * NOTE: The accessory is not shipped with your projector.
    © 3M 2012. All Rights Reserved.

    17



  • Page 19

    English

    3M™ Mobile Projector MP410

    Connecting to a DVD Player
    1

    4
    3

    2

    USB-A
    Micro SD

    Universal I/O

    HDMI

    A/V in
    DC in

    #

    Description

    1

    Power cord

    2

    AC adapter

    3

    HDMI cable *

    4

    3.5 mm jack A/V to RCA cable *

    * NOTE: The accessory is not shipped with your projector.

    18

    © 3M 2012. All Rights Reserved.



  • Page 20

    3M™ Mobile Projector MP410

    English

    Connecting to Multi-Media
    1

    4

    3
    2

    USB-A
    Micro SD

    Universal I/O

    HDMI

    A/V in
    DC in

    #

    Description

    1

    Power cord

    2

    AC adapter

    3

    MicroSD card *

    4

    USB flash disk *

    * NOTE: The accessory is not shipped with your projector.

    © 3M 2012. All Rights Reserved.

    19



  • Page 21

    English

    3M™ Mobile Projector MP410

    Turning On/Off the Projector
    Turning Your Projector On
    NOTE: Turn on the projector before you turn on the source (computer, DVD player, etc.). The
    Power button light blinks blue until pressed.

    . Connect the power cord with AC adapter and appropriate signal cables to the projector.
    2. Press the Power button.
    3. Turn on your source (computer, DVD player, etc).
    4. Connect your source to the projector using the appropriate cable.
    5. By default, the input source of the projector is set to VGA. Change the input source of
    the projector if necessary.
    6. If you have multiple sources connected to the projector, press the Source button on
    the remote control or control panel to select the desired source.

    Turning Your Projector Off
    . Press the Power button. Follow the instruction displayed on screen to properly turn
    off the projector.
    NOTE: The “Press Power Button to Turn off Projector” message will appear on the screen. The
    message disappears after 5 seconds or you can press the Menu button to clear it.

    2. Press the Power button again. The cooling fans continue to operate for 120 seconds.
    3. To power off the projector quickly, press the Power button and hold for 1 second
    while the projector’s cooling fans are still running.
    NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal temperature to stabilize.

    4. Disconnect the power cord and AC adapter from the electrical outlet and the projector.

    20

    © 3M 2012. All Rights Reserved.



  • Page 22

    3M™ Mobile Projector MP410

    English

    Adjusting the Projected Image
    Raising the Projector Height
    Raise the projector to the desired display angle, and use the front tilt adjustment wheel to
    fine-tune the display angle.

    Lowering the Projector Height
    Lower the projector, and use the front tilt adjustment wheel to fine-tune the display angle.

    Front tilt adjustment wheel
    (Angle of tilt: 0 to 6 degrees)

    Adjusting the Projector Focus
    IMPORTANT NOTE: To avoid damaging the projector, ensure that the adjustment wheels are
    fully retracted before moving the projector or placing the projector in its carrying case.

    Rotate the focus tab until the image is clear. The projector focuses at distances ranging
    between 3.18 ft to 8.48 ft (97 cm to 258 cm).

    Focus tab

    © 3M 2012. All Rights Reserved.

    21



  • Page 23

    Adjusting Projection Image Size
    80” (203.2 cm)

    70” (177.8 cm)

    Projector to screen distance

    60” (152.4 cm)

    50” (127.0 cm)

    40” (101.6 cm)

    4.23’ (1.29 m)

    5.28’ (1.61 m)

    6.36’ (1.94 m)

    7.41’ (2.26 m)

    30” (76.2 cm)
    8.48’ (2.58 m)

    English

    3M™ Mobile Projector MP410

    3.18’ (0.97 m)
    USB-A
    Micro SD

    Universal I/O

    HDMI

    A/V in
    DC in

    22

    © 3M 2012. All Rights Reserved.



  • Page 24

    3M™ Mobile Projector MP410

    Screen Size

    30” (76.2 cm)

    25.59” x 15.75”

    40” (101.6 cm)

    English

    Screen
    (Diagonal)

    Hd

    Distance

    65 cm x 40 cm

    15.75” (40 cm)

    3.18’ (0.97 m)

    33.86” x 21.26”

    86 cm x 54 cm

    21.26” (54 cm)

    4.23’ (1.29 m)

    50” (127.0 cm)

    42.13” x 26.38”

    107 cm x 67 cm

    26.38” (67 cm)

    5.28’ (1.61 m)

    60” (152.4 cm)

    50.79” x 31.89”

    129 cm x 81 cm

    31.89” (81 cm)

    6.36’ (1.94 m)

    70” (177.8 cm)

    59.45” x 37.01”

    151 cm x 94 cm

    37.01” (94 cm)

    7.41’ (2.26 m)

    80” (203.2 cm)

    67.72” x 42.52”

    172 cm x 108 cm 42.52” (108 cm) 8.48’ (2.58 m)

    Height (Hd): 81 cm

    NOTE: This graph is for user reference only.



    60

    94

    D

    © 3M 2012. All Rights Reserved.

    m

    e

    nc

    ta

    is

    .
    :1

    23



  • Page 25

    English

    3M™ Mobile Projector MP410

    User Controls
    Using the On-Screen Display
    . The projector has a multi-language On-Screen Display (OSD) Menu that can be
    displayed with or without an input source.
    2. Press the Menu button on the control panel or the remote control to enter the Main
    Menu.
    3. To select an option, press the
    remote control.
    4. Use the

    or

    or

    buttons on your projector’s control panel or

    buttons on the control panel or remote control to adjust the settings.

    5. To exit the OSD, press the Menu button directly on the control panel or the remote
    control.

    Main Menu
    Language
    Allows you to set the language for the OSD. Press
    es and press
    to change the language.

    24

    and

    to select different languag-

    © 3M 2012. All Rights Reserved.



  • Page 26

    3M™ Mobile Projector MP410

    English

    Source
    The Source menu allows you to select your projector's input source.

     Auto
    If you select and press
    available input source.

    to activate, the Auto option will automatically find the next

     VGA
    Press

    to detect a VGA signal.

     DoUSB
    Allows you to display the computer/laptop screen to your projector via the USB cable.
    NOTE: When you connect the projector and computer via the USB cable, a USB Connected
    message will pop up and allow you to select input sources as DoUSB or Storage.



    The USB Connected Screen shown below appears:



    Storage Mode: Allows you to execute copy, delete, move, and more instructions
    from your computer (only supports microSD and internal memory).

     HDMI
    Press

    to detect a HDMI signal.

    © 3M 2012. All Rights Reserved.

    25



  • Page 27

    English

    3M™ Mobile Projector MP410

     A/V In
    Allows you to display the Audio/Video source to your projector via the A/V cable.
     USB
    Allows you to playback the photo, Audio, or Video files from your USB flash disk.
     MicroSD
    Allows you to playback the photo, Audio, or Video files from your microSD card.
     Internal Memory
    Allows you to playback the photo, Audio, or Video files from internal memory of the
    projector.

    Video Mode
    The Video Mode menu allows you to optimize the display image. The options are:
    Bright, Movie, PC, User (set your preferred settings) and Presentation mode.

    Audio
    The Audio menu allows you adjust the volume setting of your projector.

    Press

    26

    to decrease the volume and

    to increase the volume.

    © 3M 2012. All Rights Reserved.



  • Page 28

    3M™ Mobile Projector MP410

    English

    Auto Adjust
    Auto Adjust automatically adjusts the projector's Horizontal, Vertical, Frequency, and
    Tracking in PC mode.

    OSD Reset
    Select and press

    to reset all settings to its factory default.

    The below warning message appears:

    Reset items include both computer sources and Video source settings.

    Advanced
    See “Advanced Menu” on pages 28~32.

    SN
    Display the projector’s serial number.

    FW Version
    Display the current projector’s firmware version.

    © 3M 2012. All Rights Reserved.

    27



  • Page 29

    English

    3M™ Mobile Projector MP410

    Advanced Menu
    The Advanced menu allows you to change settings for Display, Image, and Power.

    Display (In PC Mode)
    Select and press
    options:

    to activate display settings. The display menu provides the following

     Horizontal Position
    Press

    to move the image right and

    to move the image left.

     Vertical Position
    Press

    to move the image up and

    to move the image down.

     Frequency
    Allows you to change the display data clock frequency to match the frequency of your
    computer’s graphics card. If you see a vertical flickering wave, use the Frequency
    control to minimize the bars. This is a coarse adjustment.
     Tracking
    Synchronize the phase of the display signal with the graphic card. If you experience
    an unstable or flickering image, use the Tracking to correct it. This is a fine
    adjustment.

    28

    © 3M 2012. All Rights Reserved.



  • Page 30

    3M™ Mobile Projector MP410

    Allows you to select the aspect ratio to adjust how the image appears. Options are:
    Origin, 16:9 and 4:3.
     Origin: Select Origin to maintain the aspect ratio of the image projector according
    to the input source.
     16:9: The input source scales to fit the width of the screen to project a 16:9 screen
    image.
     4:3: The input source scales to fit the screen and projects a 4:3 image.
     Zoom
    Press
    or
    to zoom and view the image.
     Closed Caption
    Select On to enable close caption and activate the closed caption menu. Select
    appropriate closed caption options: CC1, CC2, CC3, and CC4.
    NOTE: Closed caption option is available for NTSC only.

    Display (In Video Mode)
    Select and press
    options:

    to activate display settings. The display menu provides the following

     Aspect Ratio
    Allows you to select the aspect ratio to adjust how the image appears. Options are:
    Origin, 16:9 and 4:3.
     Origin: Select Origin to maintain the aspect ratio of the image projector according
    to the input source.
     16:9: The input source scales to fit the width of the screen to project a 16:9 screen
    image.
     4:3: The input source scales to fit the screen and projects a 4:3 image.
     Zoom
    Press
    or
    to zoom and view the image.
     Closed Caption
    Select On to enable close caption and activate the closed caption menu. Select
    appropriate closed caption options: CC1, CC2, CC3, and CC4.

    © 3M 2012. All Rights Reserved.

    29

    English

     Aspect Ratio



  • Page 31

    English

    3M™ Mobile Projector MP410

    Image (In PC Mode)
    Select and press
    options:

    to activate image settings. The image menu provides the following

     Brightness
    Press

    and

    to adjust the brightness of the image.

    and

    to adjust the display contrast.

     Contrast
    Press

     Color Temperature
    Allows you to adjust the color temperature. The screen appears cooler at higher color
    temperatures and warmer at lower color temperatures.
     White Intensity
    Press

    and use

    and

    to display white intensity.

    NOTE: If you adjust the settings for Brightness, Contrast, Color Temperature, and White Intensity the projector automatically switches to User mode.

    Image (In Video Mode)
    Select and press
    options:

    to activate image settings. The image menu provides the following

     Brightness
    Press

    30

    and

    to adjust the brightness of the image.

    © 3M 2012. All Rights Reserved.



  • Page 32

    3M™ Mobile Projector MP410

    English

     Contrast
    Press

    and

    to adjust the display contrast.

     Color Temperature
    Allows you to adjust the color temperature. The screen appears cooler at higher color
    temperatures and warmer at lower color temperatures.
     Saturation
    Allows you to adjust the video source from black and white to fully saturated color.
    Press
    to increase the amount of color in the image and
    to decrease the amount
    of color in the image.
     Sharpness
    Press

    to increase the sharpness and

    to decrease the sharpness.

     Tint
    Press
    to increase the amount of green in the image and
    amount of green in the image (available for NTSC only).

    to decrease the

     White Intensity
    Press

    and use

    and

    to display white intensity.

    NOTE:
    1. If you adjust the settings for Brightness, Contrast, Color Temperature, Saturation, Sharpness, Tint, and White Intensity the projector automatically switches to User mode.
    2. Saturation, Sharpness, and Tint are only available when input source is from A/V in.

    © 3M 2012. All Rights Reserved.

    31



  • Page 33

    English

    3M™ Mobile Projector MP410

    Power
    Select and press
    options:

    to activate power settings. The power menu provides the following

     Power Saving
    Select Off to disable Power Saving mode. By default, the projector is set to enter
    power saving mode after 120 minutes of no activity. A warning message appears on
    screen showing a 60 seconds countdown before switching to power saving mode.
    Press any button during the countdown period to stop the power-saving mode.
    You can also set a different delay period to enter power saving mode. The delay
    period is the time you want the projector to wait without an input signal. Power saving
    can be set to 30, 60, 90, or 120 minutes. If an input signal is not detected during the
    delay period, the projector turns off. To turn on the projector, press the Power button.
     LED Mode
    Allows you to select between Normal or ECO mode. Normal mode operates at full
    power level. ECO mode operates at a lower power level which may provide longer
    LED life, quieter operation, and dimmer luminance output on the screen.
     Projector Mode
    Allows you to select the projector mode, depending upon how the projector is
    mounted.
     Front: This is the default option.

    32



    Rear: The projector reverses the image so that you can project from behind a
    translucent screen.



    Front Ceiling: The projector turns the image upside down for ceiling-mounted
    projection.



    Rear Ceiling: The projector reverses and turns the image upside down. You can
    project from behind a translucent screen with a ceiling-mounted projection.

    © 3M 2012. All Rights Reserved.



  • Page 34

    3M™ Mobile Projector MP410

    When password protect is enabled, a password protect screen requesting you to
    enter a password will be displayed when the power plug is inserted into the electrical
    outlet and the power for the projector is first turned on. By default, this function is
    disabled. You can enable this feature by selecting Enabled. If the password has been
    set before, key in the password first and select the function.
    This password security feature will be activated the next time you turn on the
    projector. If you enable this feature, you will be asked to enter the projector's
    password after you turn on the projector.
    1. First time password input request:
    a. Go to Power menu, press
    password settings.

    and then select Password to enable the

    b. Enabling the Password function will pop up a change screen. Key in a 4-digit
    number from the screen and press .

    c. To confirm, enter the password again.
    d. If the password verification is successful, you may resume with accessing the
    projector's functions and its utilities.
    2. If you have entered an incorrect password, you will be given another two chances.
    After three invalid attempts, the projector will automatically turn off.
    NOTE: If you forget your password, contact 3M™ or email meetings@mmm.com.

    3. To disable the password function, select the Disable option to close the function.
    4. To delete the password, select the Delete option.

    © 3M 2012. All Rights Reserved.

    33

    English

     Password



  • Page 35

    English

    3M™ Mobile Projector MP410

     Change Pasword
    1. Key in the original password.

    2. Then, enter the new password and confirm the new password again.

     Display Hour
    Display the projection time.

    34

    © 3M 2012. All Rights Reserved.



  • Page 36

    3M™ Mobile Projector MP410

    English

    Multi-Media Introduction
    Multi-media format supported:

    Photo Format
    Image Type
    (Ext Name)

    Sub Type

    Encode Type

    Max Pixels

    Max Size

    Jpeg / Jpg

    Baseline

    YUV420

    No Limitation

    2GB

    64x panel
    resolution

    2GB

    YUV422
    YUV440
    YUV444
    Progressive

    YUV420
    YUV422
    YUV440
    YUV444

    BMP

    64x panel
    resolution

    Video Format
    File Format

    Video Format

    Profile &
    Level

    Max Res

    Max Bit Rate
    (bps)

    Audio Format

    MOV, MP4,
    AVI, MKV,
    DIVX

    H264

    less than 4
    reference
    frames

    1080P

    20Mbps

    AC3, DTS,
    MP1, MP2,
    MP3, PCM,
    ADPCM

    MOV, MP4

    MPEG4

    1080P

    20Mbps

    AMR, PCM,
    ADPCM

    WMV

    WMV3

    Baseline, Main 1080P

    20Mbps

    WMA2, WMA3

    Audio Format
    Music Type (Ext Name)

    Sample Rate (KHz)

    Bit Rate (Kbps)

    MP1

    8-48

    8-320

    MP2

    8-48

    8-320

    MP3

    8-48

    8-320

    WMA

    22-48

    5-320

    © 3M 2012. All Rights Reserved.

    35



  • Page 37

    English

    3M™ Mobile Projector MP410

    How to set-up File Type for Multi-Media with USB
    NOTE: A USB flash disk must be plugged into the projector if you want to use the multimedia
    USB function.

    Follow these steps to playback the Photo, Video, or Music files on your projector:
    . Connect the power cable with AC adapter and turn on the projector by pressing the
    Power button.

    2. Plug in a USB flash disk to your projector.

    USB-A
    Micro SD

    Universal I/O

    HDMI

    A/V in
    DC in

    3. Access the Source menu, select the USB option and press the
    button. The image input source will automatically switch to Multimedia Menu when USB option is
    selected in this step.

    4. Select the multi-media files: Photo, Video, or Music, and then press the
    to start
    playing. Or select the SETUP option to change settings for Photo, Video, or Music.

    36

    © 3M 2012. All Rights Reserved.



  • Page 38

    3M™ Mobile Projector MP410

    English

    How to set-up File Type for Multi-Media with MicroSD
    NOTE: A microSD card must be plugged into the projector if you want to use the multimedia
    microSD function.

    Follow these steps to playback the Photo, Video, or Music files on your projector:
    . Connect the power cable with AC adapter and turn on the projector by pressing the
    Power button.

    2. Plug in a MicroSD card to your projector. The image input source will be automatically switched to microSD screen when you plug in a microSD card.

    USB-A
    Micro SD

    Universal I/O

    HDMI

    A/V in
    DC in

    3. Access the Source menu, select the MicroSD option and press the
    button. The
    image input source will automatically switch to Multimedia Menu when MicroSD option is selected in this step.

    4. Select the multi-media files: Photo, Video, or Music, and then press the
    to start
    playing. Or select the SETUP option to change settings for Photo, Video, or Music.

    © 3M 2012. All Rights Reserved.

    37



  • Page 39

    English

    3M™ Mobile Projector MP410

    How to set-up File Type for Multi-Media with Internal Memory
    Follow these steps to playback the Photo, Video, or Music files on your projector:
    . Connect the power cable with AC adapter and turn on the projector by pressing the
    Power button.

    2. Access the Source menu, select the Internal Memory option and press the
    button. The image input source will automatically switch to Multimedia Menu when
    Internal Memory option is selected in this step.

    3. Select the multi-media files: Photo, Video, or Music, and then press the
    to start
    playing. Or select the SETUP option to change settings for Photo, Video, or Music.

    38

    © 3M 2012. All Rights Reserved.



  • Page 40

    3M™ Mobile Projector MP410

    English

    Multi-Media Main Menu

    Multi-Media SETUP for USB, MicroSD, and Internal Memory
    The multi-media setup menu allows you to change settings for Photo, Video,
    and Music.
    NOTE: Multi-media setup menu and set are the same for the USB, MicroSD, and Internal
    Memory.

    © 3M 2012. All Rights Reserved.

    39



  • Page 41

    English

    3M™ Mobile Projector MP410

    Photo Setup
    Select and press
    following options:

    to activate photo setup menu. The photo setup menu provides the

     Display Mode
    Press
    or
    to select the display mode of the photo on the screen. Options are:
    File List, Browse Mode, Thumbnail, and Slideshow.
     Display Ratio
    Press
    or
    screen).

    to select the display ratio of the photo as Auto (original ratio) or Full (full

     Slideshow Duration
    Press
    or
    to select the slideshow duration. The image will automatically switch
    to the next photo after the time out. Options are: 5 sec, 15 sec, 30 sec, 1 min, 5 min,
    and 15 min.
     Slideshow Repeat
    Select On to repeat slideshow always. Or select Off to stop slideshow when it goes
    to the last page.
     Slideshow Effect
    Press
    or
    to select what slideshow effect you want. Options are: Random,
    Rect., Off, Snake, Partition, Erase, Blinds, Lines, GridCross, Cross, and Spiral.
    NOTE: Slideshow Duration, Slideshow Repeat, and Slideshow Effect function only support
    Slideshow mode.

    40

    © 3M 2012. All Rights Reserved.



  • Page 42

    3M™ Mobile Projector MP410

    English

    Video Setup
    Select and press
    following options:

    to activate video setup menu. The video setup menu provides the

     Display Ratio
    Press


    or

    to select the display ratio of the Video.

    Auto: Keep original aspect ratio.

    Full: Full screen.
     Play Mode


    Press
    or
    to select the video play mode. Options are: Once, Repeat Once,
    Repeat, and Random.
     Auto Play
    Select On to play the video automatically while entering the video list.

    © 3M 2012. All Rights Reserved.

    41



  • Page 43

    English

    3M™ Mobile Projector MP410

    Music Setup
    Select and press
    following options:

    to activate music setup menu. The music setup menu provides the

     Play Mode
    Press
    or
    to select the video play mode. Options are: Once, Repeat Once,
    Repeat, and Random.
     Show Spectrum
    Select On to show the spectrum plot while music is playing.
     Auto Play
    Select On to play the music automatically while entering the music list.

    42

    © 3M 2012. All Rights Reserved.



  • Page 44

    3M™ Mobile Projector MP410

    Select and press
    to activate firmware update menu. The firmware update menu provides the following options:

     Media
    Select Yes to enter firmware update screen, and then select Confirm option to
    update your media firmware by microSD card.
     Image Processor
    Select Yes to enter firmware update screen, and then select Confirm option to
    update your Video decoder firmware by microSD card.
    NOTE: Media and Image Processor firmware update only supports microSD interface, firmware
    files must be stored in the microSD card.

    © 3M 2012. All Rights Reserved.

    43

    English

    Firmware Update



  • Page 45

    English

    3M™ Mobile Projector MP410

    Appendices
    Troubleshooting
    If you experience problems with your projector, see the following troubleshooting tips. If the problem persists, contact your local reseller or service center.
    Problem

    Possible Solution

    No image appears on the 
    screen


    Partial, scrolling or
    incorrectly displayed
    image

    Ensure that the projector is turned on.
    Ensure that you have chosen the correct input source
    on the OSD Source menu.



    Ensure the external graphics port is enabled. If images
    are not displayed properly, please upgrade the video
    driver of your computer.



    Ensure that all the cables are securely connected.



    Ensure that the pins of the connectors are not bent or
    broken.



    Press the Auto Adjust button on the control panel.
    -

    If you are using a portable computer, set the resolution of
    the computer to WXGA (1280 x 800).



    If you experience difficulty in changing resolutions, or if
    your monitor freezes, restart all the equipment and the
    projector.



    If images are not displayed properly, please upgrade
    the video driver of your computer.

    The screen does not dis- 
    play your presentation

    If you are using a portable computer, press the toggle
    output settings. Example: [Fn]+[F4].

    Image is unstable or
    flickering



    Adjust the tracking in the OSD Display settings of the
    Advanced menu (in PC Mode only).

    Image has vertical flickering bar



    Adjust the frequency in the OSD Display settings of
    the Advanced menu (in PC Mode only).

    Image is out of focus

    . Adjust the focus ring on the projector lens.
    2. Ensure that the projection screen is within the required
    distance from the projector (3.18 ft [97 cm] to 8.48 ft
    [258 cm]).

    44

    © 3M 2012. All Rights Reserved.



  • Page 46

    3M™ Mobile Projector MP410

    Possible Solution

    The image is stretched
    when displaying a 16:9
    DVD



    The projector automatically detects the input signal
    format. It will maintain the aspect ratio of the projected
    image according to input signal format with an Original
    setting.



    If the image is still stretched, adjust the aspect ratio
    in the Display settings of the Advanced menu in the
    OSD.

    Error LED is blinking
    amber



    A projector fan has failed and the projector will automatically shut down.

    TEMP LED is solid
    amber



    The projector has overheated. The display automatically shuts down. Turn the display on again after the
    projector cools down. If the problem persists, contact
    3M™.

    TEMP LED is blinking
    amber



    If the projector fan fails, the projector will automatically
    shut down. Clear the projector mode by pressing and
    holding the Power button for 10 seconds. Please wait
    for about 5 minutes and try to power up again. If the
    problem persists, contact 3M™.

    The remote control is
    not operating smoothly
    or works only within a
    limited range



    The battery may be low. Check if the LED indication
    from the remote is too dim. If so, replace with a new
    CR2025 battery.

    © 3M 2012. All Rights Reserved.

    45

    English

    Problem



  • Page 47

    English

    3M™ Mobile Projector MP410

    Guiding Signals
    Projector
    Status

    Description

    Standby mode Projector in Standby mode. Ready to
    power on.

    Power

    TEMP

    ERROR

    (Blue/Amber)

    (Amber)

    (Amber)

    BLUE

    OFF

    OFF

    Flashing

    Warming up
    mode

    Projector takes some time to warm up BLUE
    and power on.

    OFF

    OFF

    LED on

    Projector in Normal mode, ready to
    display an image.

    BLUE

    OFF

    OFF

    BLUE

    OFF

    OFF

    NOTE: The OSD menu is not accessed.
    Cooling mode Projector is cooling to shutdown.
    Projector
    overheated

    Air vents might be blocked or ambient OFF
    temperature may be above 35 ºC.
    The projector automatically shuts
    down. Ensure that the air vents are
    not blocked and that the ambient
    temperature is within operational
    range. If the problem persists, contact
    us.

    AMBER

    OFF

    Fan
    breakdown

    One of the fans has failed. The
    projector automatically shuts down. If
    the problem persists, contact us.

    OFF

    AMBER

    OFF

    LED failure

    LED shutdown.

    OFF

    46

    Flashing
    OFF

    AMBER

    © 3M 2012. All Rights Reserved.



  • Page 48

    3M™ Mobile Projector MP410

    English

    Compatibility Modes (Analog/Digital)
    Resolution

    Refresh Rate (Hz)

    Hsync Frequency (KHz)

    Pixel Clock (MHz)

    640 x 350

    70.087

    31.469

    25.175

    720 x 400

    70.087

    31.469

    28.322

    720 x 400

    70.087

    31.469

    28.322

    640 x 480

    59.940

    31.469

    25.175

    640 x 480

    75.000

    37.500

    31.500

    640 x 480

    85.008

    43.269

    36.000

    800 x 600

    60.317

    37.879

    40.000

    800 x 600

    75.000

    46.875

    49.500

    800 x 600

    85.061

    53.674

    56.250

    1024 x 768

    60.004

    48.363

    65.000

    1024 x 768

    75.029

    60.023

    78.750

    1024 x 768

    84.997

    68.677

    94.500

    1280 x 720

    59.855

    44.772

    74.500

    1280 x 1024

    60.020

    63.981

    108.000

    1280 x 1024

    75.025

    79.976

    135.000

    1280 x 768

    59.87

    47.776

    79.500

    1360 x 768

    60.015

    47.712

    85.500

    1680 x 1050

    59.954

    65.290

    146.250

    1440 x 900

    59.887

    55.935

    106.500

    1920 x 1080

    60.000

    67.500

    148.500

    1280 x 800

    59.810

    49.702

    83.500

    1280 x 720

    59.855

    44.772

    74.500

    720 x 480 p60

    59.940

    31.469

    27.000

    720 x 576 p50

    50.000

    31.250

    27.000

    1280 x 720 p60

    60.000

    45.000

    74.250

    1280 x 720 p50

    50.000

    37.500

    74.250

    1920 x 1080 i60

    60.000

    33.750

    74.250

    1920 x 1080 i50

    50.000

    28.125

    74.250

    1280 x 768 -R60

    59.995

    47.396

    68.250

    1280 X 768

    74.893

    60.289

    102.250

    1280 X 768

    84.837

    68.633

    117.500

    1280 x 800 -R

    59.910

    49.306

    71.000

    1280 x 800

    74.934

    62.795

    106.500

    1280 x 800

    84.880

    71.554

    122.500

    1440 x 900

    74.984

    70.635

    136.750

    © 3M 2012. All Rights Reserved.

    47



  • Page 49

    English

    3M™ Mobile Projector MP410

    Specifications
    Item

    Specification

    Light Valve

    0.45” WXGA S450 DMD, DarkChip3™

    Brightness

    300 ANSI lumens (Typical)

    Contrast Ratio

    10000:1 Typical (Full On/Full Off)

    Uniformity

    80% Typical (Japan Standard - JBMA)

    Number of Pixels

    1280 x 800 (WXGA)

    Internal Flash

    1 GB Memory (Max.)

    Displayable Color

    1.073 billion colors

    Projection Lens



    F-Stop: F/ 2.0



    f=14.95 mm



    Fixed Lens



    Throw ratio = 1.5 wide and tele



    Offset ratio: 100%

    Projection Screen Size

    30~80 inches (Diagonal)

    Projection Distance

    3.18~8.48 ft (97 cm ~ 258 cm)

    Video Compatibility



    Composite Video: NTSC (M, 3.58, 4.43), PAL (B, D, G, H, I,
    M, N, 4.43), SECAM (B, D, G, K, K1, L, 4.25, 4.4)



    Component Video input via VGA: 1080i (50/60 Hz), 720p
    (50/60 Hz), 576i/p, 480i/p



    HDMI input: 1080p, 720p, 576i/p, 480i/p

    Power Supply

    Universal AC 100-240 50-60 Hz with 65 W power adapter

    Power Consumption



    Normal mode: 55 W ± 10% @ 110 Vac



    Eco mode: 45 W ± 10% @ 110 Vac



    Standby mode < 0.5 W

    Audio

    1 speaker x 1 watt RMS

    Noise Level



    36 dB(A) in Bright mode



    34 dB(A) in Presentation mode



    32 dB(A) in Eco mode

    Weight

    < 1.0 lbs

    Dimensions (W x H x D)

    106.3 x 43.16 x 105 mm

    48

    © 3M 2012. All Rights Reserved.



  • Page 50

    3M™ Mobile Projector MP410

    English

    Item

    Specification

    Environmental



    Operating temperature: 5 ºC to 35 ºC (41 ºF to 95 ºF)
    Humidity: 80% maximum



    Storage temperature: 0 ºC to 60 ºC (32 ºF to 140 ºF)
    Humidity: 80% maximum



    Power: One DC power jack



    VGA input: One 24-pin universal connector (Black) for
    analog RGB input signals and supporting Audio output.



    HDMI input: One HDMI connector for supporting HDMI 1.3.
    HDCP compliant.



    AV input: One 3.5 mm connector for supporting Audio/
    Video input.



    USB (type A) port: One USB connector for supporting
    USB display, multimedia playback (Video/Audio/Photo),
    and USB Memory storage access (USB flash drive/internal
    memory).



    MicroSD card slot: One microSD connector for supporting
    multimedia playback (Video/Audio/Photo) and supporting
    media and image processor firmware upgrade.

    I/O Connectors

    Light Source

    Mercury-free LED (up to 20000 hours in Normal mode)

    NOTE: The LED life rating for any projector is a measure of brightness degradation only, and is
    not a specification for the time it takes a LED to fail and cease light output. LED life is defined
    as the time it takes for more than 50 percent of a LED sample population to have brightness
    decrease by approximately 50 percent of the rated lumens for the specified LED. The LED life
    rating is not guaranteed in any way. The actual operating life span of a projector LED will vary
    according to operating conditions and usage patterns. Usage of a projector in stressful conditions which may include dusty environments, under high temperatures, many hours per day, and
    abrupt powering-off will most likely result in a LED’s shortened operating life span or possible
    LED failure.

    © 3M 2012. All Rights Reserved.

    49



  • Page 51

    Mobile Interactive Solutions
    3M Austin Center
    6801 River Place Blvd.
    Austin, TX 78726-9000
    866-631-1656
    www.3Mmobileprojector.com
    e-mail: meetings@mmm.com
    3M is a trademark of 3M Company. All other trade
    names referenced are the service marks, trademarks or
    registered trademarks of their respective companies.

    © 2012 3M. All Rights Reserved.
    Made in China
    78-6971-1613-1 Rev. A






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für 3m MP410 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von 3m MP410 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 10 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info