Bedienungsanleitung 3m MP8620 (Seite 2 von 32) (Englisch)

5557

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

3M 1997 3M Multimedia Projector MP8620 1

Safeguards

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3M Multimedia Projector

MP8620 was designed, built and tested for use indoors, using 3M brand lamps and nominal local

voltages. The use of other replacement lamps, outdoor operation or different voltages has not been

tested and could damage the projector or peripheral equipment and/or create a potentially unsafe

operating condition.

IMPORTANT SAFEGUARDS

Read and understand all instructions before using. Pay particular attention to areas where this symbol

is shown.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result

in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided, could result in

minor or moderate injury. It may also be used to alert against unsafe practices.

2. Close supervision is necessary when any appliance is used by or near children. Do not leave

appliance unattended while in use.

3. Never look directly into the projector lens when the lamp is on. The metal halide lamp produces a

strong light which could damage your eyesight.

4. Care must be taken as burns can occur from touching hot parts.

5. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged —

until it has been examined by a qualified service technician.

6. Position the cord so that it will not be tripped over, pulled or contact hot surfaces.

7. If an extension cord is necessary, a cord with an earth/ground and a current rating at least equal to that

of the appliance should be used. Cords rated for less amperage than the appliance may overheat.

8. Always unplug appliance from electrical outlet before cleaning and servicing and when not in use.

Grasp plug and pull to disconnect.

9. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.

10. To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified

technician when service or repair work is required. Incorrect reassembly can cause electric shock

when the appliance is subsequently used.

11. The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire,

electric shock, or injury to persons.

12. Connect this appliance to a grounded outlet.

13. This unit is equipped with optical lenses and should not be exposed to direct sunlight.

14. Keep ventilation openings free of any obstructions.

15. Use caution not to pinch fingers when folding projector into closed position.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you operate and maintain your 3M MP8620 Multimedia

Projector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

3m MP8620 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von 3m MP8620

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info