654551
20
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
E-19
Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Note:
When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached
easily.
Press the STANDBY button after the STANDBY indicator is lit in amber.
The included power cable is exclusively for use with the PX5. Never use it with other products.
S
TA
N
D
B
Y
S
TAT
U
S
M
E
N
U
AUDIO
RGB
S-VIDEO
VIDEO
S
O
U
R
C
E
A
U
T
O
D
C
M
Firmly plug in all
the way.
To wall outlet
Operating
3
Switch on the projector power
Press the STANDBY button.
The first time the power is switched on after purchase, [Menu
Language Select] will be displayed. See Page E-20 for informa-
tion about language selection.
When the power is turned on, the STANDBY indicator starts flash-
ing green, then stops flashing after about 60 seconds. If the STATUS
indicator lights green at this time, the lamp mode is set to Eco.
See E-26 and 48 for instructions on selecting.
If the power does not come on, see When the STATUS Indicator is
Lit or Flashing on Page E-54.
If the Password input window is displayed: See E-31.
A password is set for this projector.
The projector cannot be used unless the correct password is input.
To turn off the power: See E-21.
The projector is now capable of regular projection.
Note:
The image can be muted quickly by closing the lens cover while the image
is being projected.
RGB
STANDBY
VIDEO
CANCEL QUICK
MENU
ENTER
Q
2
Turn the lens cover clockwise.
When the lens cover stops with a click, the
projector is ready for projection.
1
Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in amber, and the unit will enter the standby mode.
STA
N
D
B
Y
S
TA
TU
S
M
ENU
E
1
S
TA
N
D
B
Y
ST
A
TU
S
M
E
N
U
C
E
2
STANDBYSTATUS
Lit amber
STANDBYSTATUS STANDBYSTATUS STANDBYSTATUS
This indicator is also lit green in Eco-mode.
Flashing green
(Approximately 60
seconds)
Lit green
Power is on
Lit amber
STANDBYSTATUS
(button on main unit)
4
Switch on the power of the connected equipment
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für 3m PX5 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von 3m PX5

3m PX5 Bedienungsanleitung - Deutsch - 63 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info