Bedienungsanleitung Acco V-55 (Seite 2 von 8) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

551432

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Operating Instructions

Introduction

Thank you for choosing this Shredder from Rexel. We are sure it will serve you well, but please take a little

time to study these instructions to ensure that you get the best out of your machine.

Safety First

Shredders are safe to use so long as you take a few simple safety precautions:

• Ensure the machine is plugged into an easily accessible power outlet, and ensure the flex is not likely

to trip up a passer by.

• Do not operate the machine unless it is located on the waste bin provided.

• The models V-25/V-35/V-55/V-125 have a cross cut action, which is potentially more hazardous than

the straight cut models V-20/V-30/V-50/V-120 – do not attempt to operate the machine unless it is

correctly seated on the bin.

• Do not attempt to put your hand inside the bypass entry at any time, particularly when the machine is

in operation.

• Any attempt to repair this unit by unqualified personnel will invalidate the warranty. Please return to

supplier.

• Do not use cleaning solutions on the surface of this machine! Clean with wet cloth and soap only

Operation

1. Push the switch to the on position ( I).

2. Feed paper into the entry to activate the auto start trigger.

3. Cutters will stop automatically after the paper has passed through the head.

4. Empty the waste basket regularly to ensure the shredder exit does not become blocked with paper.

5. When not in use, move the switch to the off position (O).

Clearing Paper Overloads

1. If the machine stops due to excessive paper volume, move the switch to the reverse position (R)

and hold until the paper has cleared from the exit.

2. Separate the sheets and re-feed a smaller quantity.

3. If the sheet jams when reversing, tear off the accessible sheets and move the switch to the forward

position. If this fails to clear, repeat the process again.

4. In the case of serious paper jam, please take the unit to your authorised service provider.

5. Warning – do not under any circumstances use any metal objects (scissors, letter openers, etc.) in an

attempt to clear the entry – this model has mains voltage inside the casing, which could cause serious

injury.

Cross Cut Models

1. The cross-cut models use a sharpening cutting mechanism, which make the exit of the unit dangerous

when in use. Always ensure the unit is correctly seated on the waste basket provided before operation.

2. Disconnect from the power supply when removing paper manually from the exit.

3. Take extra care when this unit is in use near young children (for example in the home office) – ensure

they are not left unattended when this machine is connected to the power supply.

Warranty

This product is guaranteed for 24 months from date of purchase – please return the unit to your supplier if

you experience any problems. This does not affect your statutory rights.

CONFORMS TO CURRENT E.C. SAFETY REGULA

TIONS.

DETAILS AVAILABLE FROM YOUR SUPPLIER.

V20/V30

V25/V35 V55 V125

4 x 45mm

4 x 34mm 4 x 34mm

4-5 6-7 7-8

18L 23L 35L

Duty Cycle (min) 1min/5min 2min/4min 2min/4min

Temps d’utilisation

V50 V120

5.8mm 5.8mm 5.8mm

7-8 10-11 12-13

18L 23L 35L

Duty Cycle (min) 2min/30min 2min/4min 2min/4min

Temps d’utilisation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acco V-55 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info