Bedienungsanleitung Acer B130i (Seite 4 von 11) (Englisch, Französisch)

692736

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to

dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need for service

• the product does not operate normally after following the operating instructions

Note: Adjust only those controls that are covered by the operating instructions, since

improper adjustment of other controls may result in damage and will often require extensive

work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing

components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small

children.

Additional safety information

• Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.

• Turn on the projector first and then signal sources.

• Do not place the product in the following environments:

• Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow

of air around the projector are necessary.

• Locations where temperatures may become excessively high, such as inside of a car with all

windows rolled up.

• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical

components, shorten the life span and darken the image.

• Locations near fire alarms.

• Locations with an ambient temperature above 40 ºC/104 ºF.

• Locations where the altitudes are higher than 10000 feet.

• Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or

electric shock. In this case, unplug immediately and contact your dealer.

• Do not keep using this product to break or drop it. In this case contact your dealer for inspection.

• Do not face the projector lens to the sun. It can lead to fire.

• When switching the projector off, please ensure the projector completes its cooling cycle before

disconnecting power.

• Do not frequently turn off the main power abruptly or unplug the projector during operation. The

best way is to wait for the fan to stop before turning main power off.

• Do not touch the air outlet grille and bottom plate which become hot.

• Do not look into the air outlet grille when projector is operating. It may hurt your eyes.

• Always open the lens shutter or remove the lens cap when the projector is on.

EN-3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acer B130i Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info