542444
6
Zoom out
Zoom in
Vorherige Seite
1/59
Nächste Seite
vi
might cause fire or electric shock.
Do not use the product if it has been dropped or the case is broken. Return
it to a dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
Do not disconnect the power while the projector is operation. Wait until
the fan has stopped running before turning the main power off.
The ventilation area and bottom plate will become hot during use. Do not
touch them.
If a dust filter is fitted, clean it regularly to ensure adequate cooling.
Clogged filters may lead to high temperatures that will damage the device.
Do not look into the ventilation slots while the lamp is on. The bright light
may hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not place items in front of the projector when it is turned on, as the
heat from the lamp may damage items or cause a fire. If you wish to turn
off the lamp temporarily, press HIDE on the remote control.
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
Do not operate the lamp for longer than its indicated lifespan. Doing so
may lead to the lamp failing.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The projector will warn you when the lamp life is over. Replace the lamp as
soon as possible after the warning is displayed.
When changing the lamp, allow the unit to cool down, and follow the
instructions included with the replacement lamp.
Reset the lamp timer from Management > Lamp Hour Reset in the OSD
after replacing the lamp module.
Do not attempt to disassemble the projector. There are high-voltage
components inside which may cause injury. Refer all servicing to qualified
service personnel.
Do not stand the projector on its sides. It may fall over causing injury and
damaging the projector.
This projector may be mounted from the ceiling. Use only an Acer
mounting kit and ensure it is securely installed.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Acer P7213 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Acer P7213

Acer P7213 Bedienungsanleitung - Deutsch - 60 seiten

Acer P7213 Bedienungsanleitung - Holländisch - 61 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info