524583
4
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
EN • 4
ENFRRU PL DE IT ES NL
Delta Pro S / Delta Pro Pack : 664Y4900 • E
WORKING PRINCIPLE
The Delta Pro boiler is a high performance hot water producer using indirect
heat transfer due to its Tank-in-Tank technology.
At the centre of the Delta Pro there is a stainless steel cylinder through
which the flue tubes pass. It is surrounded by a mild steel shell containing the
primary water (neutral fluid). The outer shell extends down to the combustion
chamber and also surrounds the flue gas tubes. The heat exchange surface is
therefore larger than that of traditional direct fired hot water boilers.
The gas or oil burner heats the primary fluid which indirectly heats the stainless
steel cylinder containing the hot water. As with all Tank-in-Tank systems, the
cylinder is corrugated over its full height and suspended in the boiler by its hot
and cold water connections.
The fact that the cylinder expands and contracts as it is used and that cold
water is not in contact with the intense heat of the burner flame prevents scale
formation. This resistance to scale, along with the anti-corrosion properties of
the stainless steel mean that sacrificial anodes are not needed.
The Delta Pro has a major advantage over other hot water boilers: it heats hot
water with a primary circuit, which allows the primary fluid to also be used
for heating.
STANDARD EQUIPMENT
DELTA PRO S MODELS 25/45/55 HAVE THE
FOLLOWING COMPONENTS AS STANDARD:
- on/off switch
- summer/winter selector
- thermostat adjustable from 60°C to 90°C
- temperature-pressure gauge
- limit thermostat (auto-reset) 95°C
- manual reset safety thermostat 103°C
- primary safety valve 3Bar
- hot water safety valve 7Bar
- drain down valve
- body fully insulated with rigid polyurethane foam
DELTA PRO PACK MODELS 25/45 HAVE THE
FOLLOWING COMPONENTS AS STANDARD:
- on/off switch
- summer/winter selector
- thermostat adjustable from 60 °C to 90 °C
- temperature-pressure gauge
- limit thermostat (auto-reset) 95 °C
- manual reset safety thermostat 103 °C
- primary safety valve 3 Bar
- hot water safety valve 7 Bar
- manual four-way valve (servomotor available as an option)
- circulator with automatic air eliminator
- primary expansion tank 12 litres
- hot water expansion tank 2 litres
- drain down valve
- body fully isolated with rigid polyurethane foam
OPTIONAL EQUIPMENT
DELTA PRO S 25/45 & PRO PACK 25/45
- Balanced flue kit (except for Delta Pro S 55)
- Control Unit kit (Delta Pro Pack only)
- Servomotor (Delta Pro Pack only)
CONSTRUCTION FEATURES
CASING
The boiler is covered by a steel casing which has been scoured and phosphated
before being stove enamelled at 220°C.
BOILER BODY
The boiler body containing the primary fluid is constructed with STW 22 steel.
This is tested at a pressure of 4.5bar (maximumservice pressure = 3 bar).
TANKINTANK ACCUMULATOR/HEAT EXCHANGER
The internal ring-shaped inner tank is constructed from Chrome/Nickel 18/8
stainless steel and has a large heat exchange surface area to quickly heat the
water. It is corrugated over its height by an exclusive manufacturing process
and is entirely argon arc welded using the TIG (Tungsten Inert Gas) method.
COMBUSTION GAS CIRCUIT
This includes:
The flue tubes:
The different DELTA Pro models include, depending on their power, 4 or 8
steel flue tubes with an internal diameter of 64mm. Each tube is equipped
with a stainless steel turbulator designed to improve thermal exchange and
reduce flue gas temperature.
The sealed combustion chamber:
The combustion chamber of all the DELTA Pro models is entirely water
cooled.
INSULATION
The boiler body is fully insulated by rigid polyurethane foam with a high
coefficient thermal insulation, sprayed-on without the use of CFCs.
DESCRIPTION OF THE BOILER
DELTA PRO S 25/45/55 & PRO PACK 25/45 MODELS
1. Flue reduction collar with easy access for servicing
2. Rigid polyurethane foam insulation
3. PVCC dip tube with cold water diffuser
4. Control thermostat bulb
5. Burner
6. Burner chamber plate with refractory ceramic fibre
insulation
7. Cut-off thermostat and manual reset safety thermostat
bulb
8. Flue tubes
9. Turbulators
10. Stainless steel "Tank-in-Tank" hot water cylinder
11. Primary circuit (heating)
12. Combustion chamber
13. Boiler base
14. Heating flow
15. Heating return
16. Domestic hot water outlet
17. Domestic cold water supply
18. Primary hot water safety valve [7 bar]
19. Primary heating safety valve [3 bar]
20. Flue connection Ø 100mm
21. Drain down valve
DELTA PRO PACK 25/45 MODELS
22. Hot water expansion tank [2 litres]
23. Heating circulator with built-in automatic air eliminator
24. Four-way mixer valve (optional motor)
25. Heating expansion tank [12 litres]
DESCRIPTION
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ACV Delta Pro Pack 25 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ACV Delta Pro Pack 25

ACV Delta Pro Pack 25 Bedienungsanleitung - Deutsch - 30 seiten

ACV Delta Pro Pack 25 Bedienungsanleitung - Holländisch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info