Bedienungsanleitung Adler AD 2167 (Seite 4 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

738823

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

water.

21. Do not use when standing. Only use in sitting possition.

22. FIll the device only with water. Do not use any oils or bathing solutions, gels and

substances.

23. If you have any concerns about your health please contact a phisician before use.

Users with heart problems, heart pacemakers, diabedic or other health problems. Pregnant

women and users complaining on prelonged joint and muscle pains. Long lasting and

frequent pains may be warning sighns of serious ilness please consult a Doctor.

24. Do not use the device more than 10 minutes without breaks.

DESCRIPTION OF THE DEVICE (fig 1)

1. casing 2. Power switch knob

3. rollers 4. Attachment with insets

5. “brush” attachment 6. Attachment with wheels

7. Antisplash cover 8. Infrared lamp

DEVICE UTILIZATION

1. Make sure that the device is disconnected from the power, and the power knob is set to “off” position (fig. 2.1).

2. Fill the tank with warm or cold water, depending on your preferences. Do not fill above MAX mark. NOTICE: The device has water

temperature maintaining feature, not water warming feature.

3. Choose one of three attachments (4, 5, 6) and place it in appropriate place of the massager (as shown on fig. 1).

4. Connect the massager to the power. Never unplug the massager if your feet are immersed in water.

5. Sit comfortably and put the feet in the massager. Never stand on the massager.

6. Choose one of available massaging programmes (fig 2).

- 2: Vibration and bubble massage in cold water

- 3: Vibration and bubble massage in warm water, maintaining water temperature, infrared lamp on

- 4: Infrared massage, maintaining water temperature

7. After using the massager switch the power knob to “off” position, remove feet from the water and wipe them dry. Disconnect the

massager from the power circuit.

8. Wait until the device cools, clean according to the description in “Cleaning the device” section.

CLEANING THE DEVICE

1. Make sure that the device is disconnected from the power and is not warm.

2. Never immerse whole device in water.

3. In order to clean the device, use cloth with washing-up liquid. Rinse the massager bowl and wipe dry.

NOTICE: Do not immerse the massager in water or other liquids to avoid water penetrating into the inside of device.

TECHNICAL DATA

Supply voltage: 230V~50Hz

Power: 80W

Device is made in class II of insulation.

Device is compliant with EU directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding

waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous

components, which may effect the environment. Do not dispose this appliance in the common waste bin.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 2167 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info