53396
75
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
75
For extractor versions (13A), connect the other end of the exhaust pipe to the flue.
For filter versions (13F), fit deflector F to the support and secure it to the bracket
supplied using 4 screws, then connect the exhaust pipe to the connection ring located
on the deflector.
Fit the nuts with fixing hooks (14) supplied inside the top and bottom sections of the
flues at the rectangular slots. A total of 14 nuts must be fitted.
Only for CHDI 8820/DI 8820:Fix the two bracket supplied with one screw each
(15a)
Join the two top sections of the flue to cover the support (15b) so that one of the slots
on the sections is situated on the same side of the control panel and the other on the
opposite side. Screw the two sections together with 8 screws and springs (4 each
side- see the plan diagram for joining the two sections - springs must be fixed
horizontally).
Fix the top flue assembly to the support, near the ceiling, with two screws (16 - one
each side).
Carry out electrical connection of control panel and bulbs (17).
Join the two bottom sections of the flue covering the support (18) using 6 screws and
springs (3 each side, see the plan diagram for joining the two sections - springs must
be fixed horizontally).
Insert the bottom section of the flue in its seat so that it completely covers the motor
compartment and electrical connection box, then ensure it from inside the hood using
two screws (19).
Apply the 2 tabs (20 - supplied) to cover the fixing points of the bottom flue
(CAUTION! THE BOTTOM FLUE TABS ARE THE NARROWER AND
SHALLOWER ONES).
The wider and deeper tabs are those used for the top flue, and must be cut to size.
If necessary, slightly expand the tabs to ensure their adherence to the flue.
Turn the mains power on again at the central electrical panel and check for correct
hood operation.
75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG CHDI 8820 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von AEG CHDI 8820

AEG CHDI 8820 Bedienungsanleitung - Holländisch - 23 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info