Bedienungsanleitung AEG CX8-2-95IM (Seite 5 von 30) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

697529

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

AEG reserves the right to change products, information and

specications without notice.

ENGLISH

Thank you for choosing an AEG CX8 vacuum cleaner. In order to

ensure the best results, always use original AEG accessories and spare

parts. They have been designed especially for your vacuum cleaner.

This product is designed with the environment in mind. All plastic

parts are marked for recycling purposes.

DESCRIPTION OF CX8

A. ON/OFF button

B. Power regulation button

C. Locking screw

D. Charging station, wall unit (*

E. Charging station, oor unit (*

F. Charging adapter

G. Fine lter (inner lter)

H. Pre lter (outer lter)

I. Release button, dust container

J. Dust container

(* Not available on models

CX8-2-75xxx

K. Cable protector grill

L. Hatch cover for brush roll

M. Brush roll

N. BRUSHROLLCLEAN® pedal

O. Nozzle front lights

P. Charging indicator

Q. Cli hanger

R. Wall holder *)

S. Charging connector*)

*) Only on models CX8-2-75xxx.

BEFORE STARTING

Check that the package includes all parts described in this instruction

manual and read this manual carefully. Pay special attention to the

safety precautions chapter. Save these instructions.

1 Assemble the handle.

For model CX8-2-75xxx, use the wall holder *):

2 A) Make sure that CX8 is on a stable and horizontal surface away from

heat sources, direct sunlight or wet places. Attach the wall holder to the

wall 104cm above the oor with a suitable screw and wall plug. Make

sure to use a correct wall plug for the wall.

B) Attach the handle to the wall holder.

C) Connect the charging cable to the back side of the vacuum cleaner.

For all other models:

3 Assemble the charging stand.

4 A) Connect the charging cable to the charge stand.

B) There is a hollow space in the bottom of the charging station where

unused cable can be wound.

C) Position the charging station on a stable and horizontal surface away

from heat sources, direct sunlight or wet places.

5 Insert the adaptor into the mains and charge CX8. The charging indica-

tor will be lit when CX8 is on charge.

CHARGING CX8

6 When fully charged, the charging indicator will blink slowly. The

numbers of LED lamps will indicate the level of charge. Full charging

time is around 5hours. For better battery performance, charge CX8 for

24hours before rst use and always keep it on charge when not used.

VACUUMING WITH CX8

Before vacuuming, check that the nozzle wheels and the brush roll are

clean from sharp objects in order to avoid scratching sensitive oors

and to ensure full cleaning performance.

7 Start and stop CX8 by pushing the ON/OFF button. CX8 has 3 power

settings which is regulated with the

power regulation button

CX8

will start on the “High power mode”.

For more silent cleaning and longest run time, press the power regula-

tion button to activate the “Long runtime mode”.

Press the power regulation button one more time to activate the “Nor-

mal cleaning mode”.

BRUSHROLLCLEAN® FUNCTION

Use the BRUSHROLLCLEAN® function to keep the brush roll clean and

free from hair and bres. For best results use the BRUSHROLLCLEAN®

function when

CX8

is fully charged.

8 Place CX8 on a hard and at surface. Do not use the BRUSHROLLCLEAN

function on carpets.

Press the BRUSHROLLCLEAN

pedal with your foot while the cleaner is

on. Hold for 5 seconds until hairs and bres are removed. There will be

a cutting noise during this process, this is normal. If hairs remain on the

brush roll, repeat the process.

The BRUSHROLLCLEAN

function is equipped with an overheating

protection. If the BRUSHROLLCLEAN

function has been used for more

than 30 seconds (constant or interrupted) it will deactivate the brush

roll and turn o the nozzle front lights. The vacuum cleaner can still be

used, even when the BRUSHROLLCLEAN

function is deactivated. To

reactivate the BRUSHROLLCLEAN

function, place CX8 on charge and

charge for 15minutes.

Please note that the BRUSHROLLCLEAN® function might not be able to

remove thicker threads or wires that are caught in the brush roll.

EMPTYING OF THE DUST CONTAINER

9 Remove the dust container by pressing the button.

10 Take out the lters from the dust container by pressing the release but-

tons.

Empty the contents into a dustbin. Never wash the dust container

or lters in a dishwasher.

IMPORTANT  FILTER CLEANING!

11 The lters must be cleaned at regular intervals to ensure a high clean-

ing performance.

Take out the lters by pressing the release buttons.

Separate the inner lter from the outer lter.

12 Rinse the lter parts carefully under lukewarm water without using any

detergents. (Never use the dishwasher or washing machine.) S

hake to

remove excess water and leave to dry minimum 12h before putting

them back into the cleaner.

CLEANING THE HOSE AND NOZZLE WHEELS

13 Loosen the hose behind the nozzle from its upper connection. Remove

any object or debris that can be blocking the airow in the hose or in

the air channel to the dust cup, and put the hose back.

14 If the wheels need to be cleaned or get jammed, remove them carefully

by using a at screwdriver.

REMOVING AND CLEANING THE BRUSH ROLL

15 If the brushroll gets blocked CX8 will stop. Open the cable protector

grill and the brush roll hatch cover and remove the brush roll.

16 Us

e a pair of scissors to remove threads etc. Reassemble the brush roll,

making sure it can spin freely.

REMOVING THE BATTERIES FOR RECYCLING

Warning; Battery removal must only be done by an AEG service

center or ocial collection point!

17 Only remove batteries if the product is to be scrapped. Improper han-

dling of the batteries may be hazardous. Batteries should always be

completely discharged before removal.

Take your product to an AEG

service center or ocial collection point for recycling. They can remove

and recycle the battery and electric parts in a safe and professional

way

Follow your country’s rules for collection of rechargeable batteries

and electrical products.

Enjoy a great cleaning experience with CX8!

7www.aeg.com

AEG CX8-2-95IM Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info