546368
39
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
English
39
Overview of the components
Front
1 Telescopic antenna
2 LCD display
3
/ buttons (Scan forwards/ backwards)
4 VOL+/VOL buttons (volume)
5 SCAN button (scan)
6 MENU button (open menu)
7 INFO button (show information)
8 POWER button (standby/ operation)
9 REPEAT ALARM/SELECT button (repeat alarm/ confirm)
10 ALARM ON/OFF button (alarm On/ Off)
11 SOURCE button
12 PRESET button
13 SLEEP button (snooze)
Rear view (without illustration)
Battery compartment
DC IN 6 V connector
OFF/ON switch (On / Off)
Installation
• Readthemanualthoroughlybeforeoperatingthede-
vice!
• Chooseasuitablelocationforthedevice.Suitableloca-
tions are dry, even and antislip surfaces on which you may
operate the device easily.
• Makesurethereisproperventilationforthedevice!
• Remove,ifnecessary,theprotectionsheetfromthe
display.
Power supply (Adaptor)
• Insertthegridplugintoaproperlyinstalledthreeprong
socket. Connect the device with the plug connector by
inserting its plug into the DC 6 V jack of the device.
• Makesurethegridvoltagecorrespondstothegureson
the rating plate.
CAUTION:
• Onlyusethesuppliedpoweradaptorforthisdevice.
Do not use for other devices.
• Only use power adaptor with 6 V (
), other
adaptors may cause damage to the device.
NOTE:
Disconnect from mains power supply during longer periods
of non-use.
Battery Operation
You also have the option of operating the unit with 4 Type R6
“AA” batteries.
1. Open the battery compartment on the back.
2. Insert 4 R6 “AA” batteries 1.5 V. Mind the correct polarity
(indicated on the bottom of the battery case)!
3. Close the battery case.
4. Ifthedeviceisnotusedforanextendedperiodoftime,
remove the batteries from the device to avoid any leaking
of battery acid.
CAUTION:
• Neverusedifferentbatterytypesornewandusedbat-
teries together.
• Batteriesmustnotbedisposedofinthegarbage.
Please bring used batteries to competent collection
centers or back to the dealer.
WARNING:
Donotexposebatteriestoanyhightemperaturessuchas
sunlight, fire, or the like. There is a danger of explosion!
NOTE:
• Ifyouhaveconnectedthepowersupply,thebatteries
are automatically deactivated.
• Alwaysswitchoffthedeviceduringnon-usewiththe
OFF ON switch on the back, to not unnecessarily
stress the batteries. To display the time as accurately as
possible, the device will synchronize the time with the
radio station in the background. This results in a higher
battery consumption. In the worst case scenario, the
batteries could be discharged prematurely.
When shutting off the device with the OFF ON switch,
the time/ alarm time will be lost.
Installation
1. Fullyextendthetelescopicantenna(1).Standitupright
for initial installation.
2. Switch the device on at the back of the device using the
OFF/ON switch. The device automatically searches for
DAB stations. SCANNING… and a progress bar appears
on the display. The figure on the right of the display
shows the number of radio stations found. The first alpha-
numeric DAB station is played.
When playing a radio station, the time and date is taken
from the broadcasting service. If the device does not re-
ceive DAB stations in your location, set the time manually
as described in “Settings menu”.
Changing the OSD language
TheOSDmenuissetinGermanexfactory.Tochangethe
language, proceed as follows:
1. Press the MENU button (6).
2. Select the menu option “SYSTEM” with the
/ buttons
(3). Set it with the REPEAT ALARM/SELECT button (9).
3. Select the menu option “LANGUAGE” with the / but-
tons. Set it with the REPEAT ALARM/SELECT button.
4. Select the desired language with the / buttons. Set it
with the REPEAT ALARM/SELECT button.
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

aeg-dab-4138

Suche zurücksetzen

  • Warum bekomme ich keine Antwort? Ich habe in der Bbedienungsanleitung ALLES befolgt, trotzdem taucht bei meinem Gerät AEGDAB 4138 weiter „kein Radiotextteil“ auf und ich bekomme keinen Ton. die Störung ist „von jetzt auf gleich“ aufgetreten . Ich bin sogar auf dieWerkseinstellung zurückgegangen. Bitte um Hilfe: Anne Eingereicht am 23-10-2019 23:49

    Antworten Frage melden
  • Hallo.
    Bis letzten Sonntag habe ich auf meinem DAB Radio auch was gehört.
    Seit dem ist kein Ton / Geräusch zu höhren, obwohl die Signalstärke / Empfang super ist.
    Woran kann das liegen?
    Vielen Dank. Eingereicht am 27-3-2018 19:01

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG DAB 4138 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info