139792
63
Zoom out
Zoom in
Vorherige Seite
1/66
Nächste Seite
Themen
63
Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault Possible cause Solution
The power supply light
does not light
No power supply
WARNING: Before troubleshooting, switch the player off.
Put the mains plug in correctly, if necessary, check the socket is
working with another appliance.
no power supply/ mains switch
switched off
Switch the player on by the mains switch (Fig. 1/1).
No image displayed on
screen
Video cable not correctly connected
WARNING: Before troubleshooting, switch the player off.
Check the correct fi t of the Video cable „Connecting the Video cable“.
Make sure that the jacks are tightly in the sockets.
no DVD/CD inserted Insert a CD/DVD.
DVD/CD not compatible
Use only compatible media (see Technical data“).
DVD/CD incorrectly placed in
CD/DVD-tray
Turn the CD/DVD around.
CD/DVD is dirty
Clean the CD/DVD around „Handling CD/DVD“.
CD/DVD is damaged Use a different CD/DVD.
Incorrect settings Check the settings of your DVD-Player.
The child lock system is activated
Deactivate the child lock „Parental“.
The wrong TV mode has been se-
lected (no P-SCAN-capable playback
device).
Press the
V-MODE
button (Fig. 3/29) to change the TV mode
(interlace).
No response when
pressing button
Power supply problem or static
charging of appliance
Switch off the main switch and pull out the mains plug. Insert the
mains plug into the socket and switch the player on again.
No sound Audio cable not connected
WARNING: Before troubleshooting, switch the player off.
Video plug for transmission of the Video signal, you must use and
Audio cable in addition to the Video cable „Connecting the Audio
cable“.
Amplifi er switched off If you use an amplifi er for Audio output: check whether the amplifi er
is switched on.
Incorrect settings Check the settings of your DVD-Player.
The remote control does
not work
wrong direction The remote control is not pointed towards the DVD-Player.
too far away Make sure that the remote control is not further than
7 m away from the player.
Batteries empty
Replace the batteries in the remote control „Remote control battery
installation“.
DVD cannot be played DVD has not been fi nalized Use a fi nalized DVD.
Troubleshooting
05-DVD 4524 AEG - GB 63 22.01.2007, 14:09:10 Uhr
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG dvd 4524 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info