139758
62
Zoom out
Zoom in
Vorherige Seite
1/65
Nächste Seite
English
62
Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify the
fault yourself.
Fault Possible cause Solution
No display No power supply
WARNING:
Before troubleshooting, switch the player o .
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
no power supply/ mains
switch switched o
Switch the player on by the mains switch (Fig. 1/1).
No image displayed
on screen
Video cable not correctly
connected
WARNING:
Before troubleshooting, switch the player o .
Check the correct  t of the Video cable „Connecting
the Video cable“. Make sure that the jacks are tightly in
the sockets.
no DVD/CD inserted Insert a CD/DVD.
DVD/CD not compatible
Use only compatible media (see „Technical data“).
DVD/CD incorrectly placed in
CD/DVD-tray
Turn the CD/DVD around.
CD/DVD is dirty Clean the CD/DVD around.
CD/DVD is damaged Use a di erent CD/DVD.
Incorrect settings Check the settings of your DVD-Player.
The child lock system is
activated
Deactivate the child lock. see „Child protection“
The wrong TV mode has been
selected (no P-SCAN-capable
playback device).
Press the VIDEO button (Fig. 3/22) to change the TV
mode.
No response when
pressing button
Power supply problem or
static charging of appliance
Switch o the main switch and pull out the mains
plug. Insert the mains plug into the socket and switch
the player on again.
No sound Audio cable not connected
WARNING:
Before troubleshooting, switch the player o .
Video plug for transmission of the Video signal, you
must use and Audio cable in addition to the Video
cable „Connecting the Audio cable“.
Ampli er switched o If you use an ampli er for Audio output: check
whether the ampli er is switched on.
Incorrect settings Check the settings of your DVD-Player.
The remote control
does not work
wrong direction The remote control is not pointed towards the DVD-
Player.
too far away Make sure that the remote control is not further than
5 m away from the player.
Batteries empty Replace the batteries in the remote control
„Remote control battery installation“.
DVD cannot be
played
DVD has not been  nalized Use a  nalized DVD.
05-DVD 4536 N AEG_GB.indd 6205-DVD 4536 N AEG_GB.indd 62 30.07.2009 16:50:26 Uhr30.07.2009 16:50:26 Uhr
62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

aeg-dvd-4536

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG dvd 4536 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info