Bedienungsanleitung AEG EM 50-2 (Seite 6 von 12) (Deutsch, Englisch)

648392

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Developed by OJ Electronics A/S - www.ojelectronics.com

EM 50-2

English

USER MANUAL

Contents

Glossary ...................................................................................Page 6

Introduction .............................................................................. Page 6

Startup ......................................................................................Page 6

Operation .................................................................................. Page 7

Main menu ................................................................................Page 7

Display texts .............................................................................Page 7

Application info ........................................................................Page 7

Settings .................................................................................... Page 7

Oset calibration ...................................................................... Page 8

Factory settings ........................................................................ Page 9

Troubleshooting ........................................................................Page 9

Illustrations ............................................................................. Page 10

Glossary

Zone 1, 2: Independent heating zones in which ice and snow

can be melted.

Encoder button: Button which can be turned or pressed to easily

conﬁgure the settings.

EF 50-25 H: Ground sensor for detecting moisture and

temperature.

F50-10 RH: Gutter sensor for detecting moisture.

ATF 5: Outdoor sensor for detecting temperature.

Afterrun: The heat provided by the system, for a speciﬁed

length of time, after the moisture/temperature

signal has been eliminated by a heating cycle.

Introduction

Type EM 50-2 is an electronic controller for fully automatic, eco-

nomical ice and snow melting on outdoor areas and in gutters. EM

50-2 detects both temperature and moisture and the heating system

will only be activated if a possibility of snow or ice is indicated by

both parameters.

An easily operated encoder button and backlit graphic display en-

sure quick and easy conﬁguration and simple indication of tempera-

ture, status, etc.

EM 50-2 is suitable for controlling electric heating cables in 1 or 2

zones.

Startup

SELECT SCALE:

CELCIUS

FAHRENHEIT

When EM 50-2 is switched on for the ﬁrst time,

Celsius or Fahrenheit must be selected. Turn the

encoder button until the required temperature

scale is highlighted. Then OK the selection by

pressing the encoder button.

SENSOR 1:

GROUND SENSOR

GUTTER SENSOR

SENSOR 1 is shown on the display, allowing

the type of sensor connected for input 1 to be

selected:

GROUND SENSOR

GUTTER SENSOR + outdoor sensor

Then OK the selection by pressing the encoder

button.

SENSOR 2:

OFF

GROUND SENSOR

GUTTER SENSOR

SENSOR 2 is then shown on the display, al-

lowing the type of sensor connected for input 2

to be selected. If none sensor is connected for

input 2, OFF must be selected.

OUTDOOR SENSOR:

OFF

ATF

Select if outdoor sensor ATF 5 is connected

terminals 31-32.

If none sensor is connected, OFF must be se-

lected. Press encoder button for OK.

APPLICATION:

ELECTRIC 1-ZONE

ELECTRIC 2-ZONE

ELECTRIC 2-STEP

Select the application type by turning the encod-

er button and pressing OK.

ELECTRIC 1-ZONE : 1 zone electric heating

control/simple waterbased.

ELECTRIC 2-ZONE : 2 zones individual electrical

heating control/simple waterbased.

ELECTRIC 2-STEP : Advanced 2-stage electric

heating control (Y/Δ) for 1 zone. Reduces power

to 1/3 during the afterrun time. This applies only

to heating mats with 400 V. connection.

Select the appropriate option and press OK. The

system is now set up, and will begin operat-

ing fully automatically, in accordance with the

pre-conﬁgured standard program, see FACTORY

SETTINGS. Alternative settings can also be

made, see SETTINGS.

ZONE 1 HEAT OFF

ZONE 2 HEAT OFF

AFTERRUN 1 0.00

AFTERRUN 2 0.00

STANDBY OFF

Status and afterheat data for zones 1 and 2 are

now shown on the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG EM 50-2 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AEG EM 50-2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info