Bedienungsanleitung AEG mc 4416 cd mp3 (Seite 18 von 22) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

160191

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

English

MEMORY/CLOCK (3/18)

This is used for setting the time, storing stations and

programming playback.

Is this button is pressed down for approximately

3 seconds, the time is shown brie y in the display.

Programmed Play

This can be used to program any desired sequence of

tracks.

1. Press the STOP (˾/ ) key (19/16).

2. Press the MEMORY/CLOCK key (3/18 on the remote

control). „01 PR 01“ („titel“ PR „memory location“)

appears in the display together with the word PROG.

Use the ̈̈I/İ̇ buttons (18/5/15) to select the

desired track and then press the MEMORY/CLOCK

button again. The display changes to memory slot PR

02.

3. Select the next track with the ̈̈I/İ̇ key and

press the MEMORY/CLOCK key again. Repeat the

procedure until all the desired tracks are selected.

ޥ NOTE:

In the case of CDs in MP3 format you can use the

FOLDER UP/DN buttons (12 on the remote control)

to select the individual folders. The  rst track num-

ber of the respective folder is displayed.

4. Press the ̈/II key (10/4). The playback starts. The

 rst track number selected appears in the display. The

words „DISC“ and „PROG“ appear in the display. Press

this button to pause brie y the playback.

5. Press once the STOP (˾/

) key to stop the

playback while retaining the program. The program-

med number of tracks, e.g. 08 PROG is shown in the

display.

6. To resume the playback of the program press  rst the

MEMORY/CLOCK key once and then the ̈/II key.

7. To delete the program, press the STOP (˾/ ) key

twice. PROG CLEAR is shown brie y in the display

and the word PROG goes o .

The device stops automatically once the entire sequence

of programmed tracks is completed. 08 PROG is shown in

the display, for example. The programmed order of tracks

remains in the memory until you change to a di erent

mode, remove the CD from the CD compartment or

switch o the device.

It is also possible to combine the programmed tracks

with the REPEAT function. After you have programmed

and started the device, please press the PLAY MODE

button (13 on the remote control) up to three times and

then you can use the functions as described under „PLAY

MODE“.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of mu-

sic in MP3 format. The device also supports all standard

CD types: CD, CD-RW, CD-R.

This machine of is able to play MP3 CDs. Up to 200 tracks

can be compressed and stored on these CDs. Your machi-

ne detects an MP3 CD automatically (the total number

of tracks and folders appears in the display). If you would

like to play one of these CDs, proceed as described under

„Playing CDs/MP3“. Tracks can be programmed as descri-

bed under „Playing Back Programmed Tracks“.

Please note:

There are a number of di erent recording and compres-

sion methods, as well as quality di erences between CDs

and self-recorded CDs.

Furthermore, the music industry does not adhere to  xed

standards (copy protection).

For these reasons it is possible that in rare cases there are

problems with the playback of CDs and MP3 CDs. This is

not a malfunction of the device.

Bluetooth Operation

Bluetooth technology is a wireless radio connection

between devices over a short distance.

ޥ NOTE:

The working radius is restricted to approximately

3 metres.

Currently Bluetooth technology is mainly used for the

hands-free operation of mobile telephones. With this

device it is possible to use both the hands-free function

and play back music from a device which is compatible

with Bluetooth.

05-MC 4416CD_MP3 AEG.indd 1805-MC 4416CD_MP3 AEG.indd 18 12.02.2008 10:15:42 Uhr12.02.2008 10:15:42 Uhr

3. Press the TIMER button and use the VOLUME UP/DN

buttons (9/7) to select the switch-on volume VOL.

4. When the TIMER button is pressed the word „SET ON

TIMER“ appears in the display

5. Press the TIMER button again. The hours  gure begins

to  ash. Use the to select

the switch-on time (hours).

6. Press the TIMER button and use the

to select the switch-on time (minutes).

7. When the TIMER button is pressed the word „SET OFF

TIMER“ appears in the display. Press the TIMER button

again. The hours  gure begins to  ash.

8. When setting the switch-o time, please proceed in

the same way as described above.

9. Press the TIMER button again. The device switches

back to standby. „

“ appears in the display and the

timer is activated.

In order to deactivate the timer the TIMER button press .

The symbol „

“ disappears from the display.

̈̈I/İ̇ buttons (18/5/15)

̈̈I/İ̇ buttons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG mc 4416 cd mp3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info