382746
2
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
1
ENGLISH
ST 500, STE 500, STEP 500
You demand the best and buy quality quality provided by Atlas Copco.
We have built for you a reliable and lasting tool. Working effectively and without
endangering your health is only possible if these instructions for use are being read
carefully before first using this tool. We want to satisfy our customers and would
like you to buy again AEG Electric Power Tools from Atlas Copco.
ST 500 STE 500 STEP 500
Cutting depth max. in:
Soft wood 65 mm 70 mm 70 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardwood 55 mm 60 mm 60 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel 5 mm 5 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nominal power 500 W 500 W 500 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 1,9 kg 1,9 kg 1,9 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke rate under no-load 3000 min
-1
450-3000 min
-1
450-3000 min
-1
. . . . . . . .
Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel cuts up to 45
o
45
o
45
o
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J Please pay attention to the safety instructions in the attached leaflet!
J Dust that arises when working on material containing asbestos or stonework
containing crystalline silicic acid is harmful to the health. Please follow accident
prevention regulations.
J Appliances used at many different locations including open air must be connected
via a current surge preventing switch.
J Always use the protective shields on the machine.
J Always disconnect the plug from the socket before carrying out any work on the
machine.
J Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
J Sawdust and splinters must not be removed while the machine is running.
J Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
J Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
J Only plug-in when machine is switched off.
J Dust that arises when working on wood or using the tool on industrial material can be
dangerous to health. In this case connect the tool to a suitable suction device.
J Do not use cracked or distorted saw blades.
Typically the A-weighted sound pressure level of the tool is 82 dB (A).The noise
level when working can exceed 85 dB (A). Wear ear protectors! Measured values
determined according to EN 50 144.
Typically the weighted acceleration is 3 m/s
2
.
Measured values determined according to EN 50 144.
This jig saw can cut wood, plastic and metal; it can cut straight lines, bevels, curves,
and internal cut-outs.
Do not use this product in another way as stated for normal use.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Use
Mains
connection
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG st 500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info