Bedienungsanleitung Aiwa CX-NA303 (Seite 6 von 64) (Englisch, Französisch, Spanisch)

496497

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Inserting batteries

Detach the battery cover on the rear of the remote control and

insert two R6 (size AA) batteries.

@~e

R6(AA)

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the main unit should be approximately 5 meters

(16 feet). When this distance decreases, replace the batteries

with new ones.

To use SHIFT on the remote control

Buttons @ have two different functions. One of these functions

is indicated on the button, and the other on the plate above the

button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button

while pressing

SHIFT.

To use FUNCTION on the remote control

The FUNCTION substitutes for the function buttons (TAPIYDECK

1/2, TUNER, VIDEO/AUX, CD) on the main unit.

Each time FUNCTION is pressed, the next function is selected

cyclically. When tapes are inserted in both decks, each deck is

selected with

FUNCTION.

● If the remote control is not going to be used for an extended

period of time, remove the batteries to prevent possible

electrolyte leakage.

● The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor inside the display window is exposed to intense light,

such as direct sunlight

- Other remote controls are used nearby (those of a television,

etc.)

■

POWER

,—

~“-

—.

. .

CLOCIU

-—

!:–— ---

DIMMER

To turn the unit on

Press one of the function buttons (TAPE, TUNER, VIDEO/AUX,

CD). Playback of the inserted disc or tape begins, or the previously

tuned station is received (Direct Play Function).

pOWER is also available.

When the unit is turned on, the disc compartment may open and

close to reset the unit.

To turn the power off

Press POWER.

Flash window

The window on the top of the unit lights up or flashes while the

unit is being powered on.

To turn off the light of the top window, press W while pressing

CD. To turn back on, repeat the above.

DEMO (Demonstration) mode

When the AC cord is connected, the display window demonstrates

the functions of the unit. When the power is turned on, the DEMO

display is overridden by the operation display. When the power

is turned off, the DEMO mode is restored;

To cancel DEMO mode

Press II SET while the power is off. The clock flashes on the

display. (To set the current time, see “SETTING THE CLOCK

on page 15.) To re-activate DEMO mode, press ~ while the

power is off.

Demo game

You can enjoy playing Demo game with your system.

1 Press >.

Three numbers on the display start to run.

2 Press

■ once.

The number on the left side stops.

3 Press

■ twice to stop the remaining two numbers.

Scoring:

20 points are given to start the game.

If all the numbers are equal, 50 points are added to the score.

If not eaual, one point is subtracted.

If the gained points reach 9999, you win.

If the gained points fall to O, you lose.

To reset the game

Press CLOCW-DIMMER, then press >. The game starts again.

5 ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa CX-NA303 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info