Bedienungsanleitung Aiwa HT-DV90 (Seite 9 von 42) (Englisch, Französisch, Spanisch)

496631

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

REMOTE CONTROL

INSERTING BATTERIES

Open the battery cover on the rear and insert two R03 (size AAA)

batteries.

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the main unit should be approximately 5 meters

(16 ft.). When this distance decreases, replace the batteries with

new ones.

NOTE

• If the remote control is not going to be used for an extended

period of time, remove the batteries to prevent possible

electrolyte leakage.

• The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor inside the display window is exposed to intense light,

such as direct sunlight

- Other remote controls are used nearby (those of a television,

etc.)

OPERATING OTHER EQUIPMENT

You can set the remote control to operate other equipment by

inputting the brand code.

Setting the brand code

1Turn on the equipment to be set.

2 Hold down the corresponding source button ( VIDEO 1, VIDEO

2, TV, CABLE/SAT.) and press 0-9 to input the three-digit

brand code. (Brand code is shown at the end of the operating

instructions.)

3 Release the corresponding source button.

The setting is completed.

Operating other equipment

Press the corresponding source button. The remote control goes

to the corresponding source mode. 0-9, TV/VIDEO, TV CH N

M, TV VOL +- and POWER etc., are available.

Pressing POWER again within 3 seconds turns this unit of f even

when the remote control is the corresponding source mode.

When operating this unit , press DVD/CD or TUNER/BAND.

NOTE

• This remote control may not correspond to all models of the

brand shown at the end of the operating instructions.

• When the batteries are removed from the remote control, all

settings stored in memory may be lost.

• Some buttons on the remote control may not work exactly .

PARTS AND CONTROLS

MAIN UNIT

1 POWER 6STANDBY/ON

Turns the unit on and of f (standby).

2 zOPEN/CLOSE

Opens and closes the disc tray .

3 PHONES jack

Plug in here an optional headphones set with a stereo mini

plug (ø 3.5mm,

/32 in.). Speaker output is canceled.

4 SURROUND

Selects a listening mode.

BASS/TREBLE

Adjusts the bass/treble level.

SLEEP

Enters sleep-timer setting mode.

BAND

Selects the radio band.

5 FUNCTION

Selects DVD/CD, FM (AM), VIDEO 1 (ANALOG), VIDEO 1

(DIGITAL), VIDEO 2 (ANALOG) or VIDEO 2 (DIGIT AL)

function.

6 cPRESET

Disc: starts playback.

Radio: switches between tuning mode and preset mode.

sCLEAR

Disc: stops playback.

Radio: clears a station preset.

aSET

Disc: pauses playback.

Radio: stores the received station to preset.

fr TUNING-, gt TUNING+

Disc: skips to a previous or a succeeding chapter/track when

pressed, searches a chapter/track in fast forward or fast

reverse playback when held down.

Radio:manually tunes down or up within the band (tuning

mode). Selects the preset channel (preset mode).

PREPARATIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa HT-DV90 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info