Bedienungsanleitung Aiwa HT-DV90 (Seite 16 von 42) (Englisch, Französisch, Spanisch)

496631

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

DVDs:

Playback starts automatically .

If the menu is displayed, see “USING THE MENU”, below .

To switch the number between title and chapter , press

SHIFT+TITLE/CHP. With each press, title or chapter is

displayed alternately .

Audio CDs function:

If playback does not start automatically, press c

to start playback.

To play back DVDs recorded in Dolby Digital or DTS sound

See section “SURROUND PLA YBACK” (pages 24-26).

To play back an MP3 disc

Menu screen (SMAR T NAVI) appears on the TV screen after the

disc is loaded.

1. Press i,k,j or l to select PLA Y MODE.

SHIFT+PRGM, RANDOM or REPEAT is also available.

For the programed playback, see page 20.

2. Press i,k,j or l to select the folder and press ENTER.

3. Press i,k,j or l to select the file.

4. Press c to start playback.

When the play mode is program, the program file is added

each time c is pressed. To start playback, press s and then

press c.

• 0-9 is also available to select the file up to 2 digit number .

The file with

cannot be played back since it cannot be read

properly .

NOTE

• When loading an 8-cm (3-inch) disc, put it onto the inner circle

of the slot.

• Do not place more than one disc.

• Do not tilt the unit with disc loaded. Doing so may cause

malfunctions.

USING THE MENU

DVDs with the menu function may automatically display the menu

screen when the disc is loaded. Operate the menu as follows.

DVDs

Press i, k, j, or l to select your desired

program.

Press ENTER to begin playback.

To manually display the menu

Press MENU or TOP MENU during playback or stop.

NOTE

• The disc continues to spin as long as the menu is displayed.

• The contents and operation of the software specific menu vary

with the disc. Follow the instructions on the disc and on the

menu screen.

STOPPING AND PAUSING

To stop playback

Press s.

Playback stops. For DVDs, “RESUME” appears and the unit

remembers the point at which playback stopped.

To resume playback from the point where it stopped (DVD

only)

Press c.

Playback starts where it last stopped (Resume function).

To clear the point to be resumed (DVD only)

Press s again during stop.

“ST OP” appears in the TV display . The resume memory is cleared,

and playback starts at the beginning of the disc when c is

pressed.

Last scene function (DVD only)

If the disc is taken out or s is pressed to clear the resume

memory , resume function is still ef fective (up to 7 discs). Next

time the disc is loaded, “PRESS PLA Y TO RESUME PLAY”

appears on the TV screen. To resume playback, press c while

the message is displayed. If a new disc is loaded when the

memory is full, the resume data for the oldest disc is erased.

Last screen function may not work with some discs.

To pause playback

Press a.

To resume playback, press c.

NOTE

• DVD playback is resumed with the subtitle and audio language

setting at the time it was stopped, regardless of possible later

changes.

• During stop of MP3 disc or resume of DVD, the disc is still

spinning.

Total number of tracks

Title number

Elapsed time of current title

Total playing time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa HT-DV90 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info