496561
5
Zoom out
Zoom in
Vorherige Seite
1/101
Nächste Seite
En
ENGLISH
5
POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the Dolby
Digital or the Dolby Pro Logic system, it is important to position
the speakers properly. Refer to the following illustration to
find out the best location in your room.
L&R: Front speakers
C: Center speaker
Position in the center of the two front speakers. In addition,
position on or below the TV set, if connecting a TV set to the
unit.
LS&RS: Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1
meter (3.2 feet) above ear height.
NOTE
Sound output from the center and the surround speakers is
only available when the Dolby Digital system, the Dolby Pro
Logic system, or the DSP Surround system is activated with
the appropriate setting.
To mount the surround speakers on the wall
Mount each speaker on a spot that can hold its weight.
AM antenna
FM antenna
PREPARATIONS
5 Connect the supplied antennas.
Connect the FM antenna to FM 75 terminals and the AM
antenna to AM LOOP terminals.
6 Connect your video equipment (DVD player, LD
player, video tape player, etc.).
If your video equipment has an OPTICAL OUT jack
;
Connect the AUDIO OUT jacks of the video equipment to
the VIDEO1/DVD/AUX jacks of this unit with an optional
audio connecting cord with RCA phono plugs (red plug to
the R jack, white plug to the L jack).
Connect the OPTICAL OUT jack to the DIGITAL IN OPTICAL
(VIDEO 1) jack of this unit with an optional optical connecting
cord.
If your video equipment has a COAXIAL OUT jack
;
Connect the AUDIO OUT jacks of the video equipment to
the VIDEO2/LD/MD jacks of this unit with an optional audio
connecting cord with RCA phono plugs (red plug to the R
jack, white plug to the L jack).
Connect the COAXIAL OUT jack to the DIGITAL IN
COAXIAL (VIDEO 2) jack of this unit with an optional coaxial
connecting cord.
NOTE
Input to the DIGITAL IN OPTICAL jack is selected with
the VIDEO1/DVD/AUX button, while input to the DIGITAL
IN COAXIAL jack is selected with the VIDEO2/LD/MD
button (see Listening to external equipment, page 32).
Analog connection should thus be made to the input jacks
with the corresponding names depending on the type of
digital connection, as described above.
The illustration shows the connection to the VIDEO1/DVD/
AUX jacks.
If your video equipment has both OPTICAL and COAXIAL
OUT jacks, choose either connection.
When connecting an LD player via its AC-3 RF OUT jack,
use an RF demodulator to separate the analog visual
signals and the digital audio signals. Refer the operating
instructions of the LD player.
If your video equipment does not have a digital out jack
;
Connect the AUDIO OUT jacks of the video equipment to
the VIDEO1/DVD/AUX jacks of this unit with an optional
audio connecting cord with RCA phono plugs (red plug to
the R jack, white plug to the L jack).
7 Connect the television to the video equipment.
Refer to the Operating Instructions of the connected
equipment for details.
8 Connect the AC cord to an AC outlet.
The DEMO will begin when the AC cord is plugged into an
AC outlet for the first time. To deactivate the DEMO, set the
clock.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Aiwa NSX-DS8 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info