Bedienungsanleitung Aiwa XR-EM200 (Seite 13 von 19) (Englisch)

48818

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

To record radio programs and

external equipment

Use only type I (normal) tapes.

Press zPUSH EJECT to open the cassette holder.

Insert the recordable tape.

Prepare the source.

To record radio programs, press TUNER/BAND and tune

in the desired station.

To record from connected external equipment, press AUX

and prepare the equipment.

Press REC START/PAUSE twice to start recording.

When recording input from connected equipment,

manually start playback of the source.

To stop recording

Press s.

To pause recording (only for TUNER or AUX source)

Press REC START/PAUSE. Press again to resume.

To record a 4-second blank space (only for TUNER

or AUX source)

Inserting 4-second blank spaces may help you locate the

beginning of the track on other equipment with the "Music

Sensor" function.

1Press cTAPE (REC MUTING) on the unit during recording

or in recording pause mode.

"MUTING" flashes in the display for 4 seconds (a blank

space is added) and then the unit enters recording pause

mode.

2Press REC START/PAUSE to resume recording.

To record a blank space shorter than 4 seconds, press again

while "MUTING" flashes.

To record a blank space longer than 4 seconds, press again

after the unit enters recording pause mode.

Each time the button is pressed, a 4-second blank space is

added.

To erase a tape

1 Insert the tape. Set the tape to the desired point if needed.

2 Press AUX.

If optional equipment is connected to the AUX IN jacks, turn

it off.

3Press REC START/PAUSE twice.

To prevent accidental erasure

Remove the plastic tab of the cassette tape with a screwdriver

or other pointed tool. To record on the tape again, cover the

detection slot with adhesive tape.

To record a CD

Use only type I (normal) tapes.

Press zPUSH EJECT to open the cassette holder.

Insert the recordable tape.

Insert with the exposed side down, and the side to be

recorded on first facing out from the unit. Press zPUSH

EJECT to close the cassette holder.

Press FUNCTION on the remote repeatedly to

select the CD function, and load the disc.

To record only one track, start play of the track.

Press SYNCHRO REC.

The unit enters the recording pause mode, and "REC"

indicator flashes on the display.

Press REC START /PAUSE to start recording.

"MUTING" flashes in the display for 10 seconds and

recording starts.

When only a track is to be recorded, CD playing returns

to the beginning of the current track and recording starts.

•Volume or tone adjustment(s) does not affect recording.

•"NO TAB" is displayed if you attempt to record a tape

with the tab broken off.

•Only one side of the tape can be recorded at a time.

To record a selected set of tracks from a CD

Program the desired tracks (see "Programmed play" on page

9) and then press SYNCHRO REC.

TAPE RECORDING

Side A

Tab for side A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa XR-EM200 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info