168865
6
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
5
Press and hold VOL knob to adjust INIT VOL /ADJ/TA VOL/EON ON/DSP
IN VOL:
Can adjust Initial Volume level using this mode.
ADJ: Can adjust clock time. Turn VOL knob clockwise to set hours and counter clockwise to set minutes.
TA VOL: Can adjust TA Volume (The volume level when Trafc announcement is transmitted).
EON: Can selected EON condition, ON or OFF.
DSP: Can select DSP mode (Classic, Rock, POP, Flat)
4. PRESET STATIONS (1,2,3,4,5,6)
When pressed short, these keys select a preset station directly. When pressed longer than 1 sec., current station is stored in
preset memory bank.
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union). Piggy-backed on normal
FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDS-compatible car stereos.
5. ‘AF/REG’ function (ALTERNATIVE FREQUENCIES)
When pressed short, AF/REG switching mode is selected.
When AF/REG switching mode is selected, the radio checks the signal strength of the AF all the time. When pressed long, it is
activated as regional mode ON/OFF.
– Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes same as current station. REG segment is turned
on, in LCD display.
– Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
Note:
AF noise: When AF mode is ON and broadcast signal is weak,the unit will try to get more strong signal. In this period you can
listen AF muting noise. But this is normal operation. If you don’t want this noise, just turn off AF mode.
6. ‘TA’ function (TRAFFIC ANNOUNCEMENT)
When pressed short, it is activated as TA mode on or off
When TA mode is on and trafc announcement is transmitted
– When the unit is it CD/MP3 mode, it will switch to radiomode temporarily.
– If the volume level was under the threshold point, it will be raised to the threshold point.
– When TP station is received, TP segment is turned on in LCD display.
7. ‘PTY’ function (PROGRAM TYPE)
To activate the PTY search press the PTY button. In the display the notice PTY appears.
With the station search only stations of the currently selected PTY identication (see the PTY identication table) will be considered.
To deactivate the PTY search press the PTY button again.
SettingthePTYidentication
Hold down the PTY button and then turn the multi controller to set the individual PTY identications.
 StationsearchbyPTYidentication
• During the display of a PTY identication if you press briey the PTY button or the buttons
VOLVOL
or
VOLVOL
a search immediately
starts for stations, which correspond to this PTY identication.
 PTYidentication
NEWS--AFFAIRS--INFO--SPORT--EDUCATE--DRAMA--CULTURE--SCIENCE--VARIED--POP--ROCK--EASY M--LIGHT
M--CLASSIC--OTHER M--WEATHER--FINANCE--CHILDREN--SOCIAL--RELIGION--PHONE IN--TRAVEL--LEISURE--JAZZ--
COUNTRY--NATION. M--OLDIES--FOLK M--DOCUMENT--TEST--ALARM.
8. DISPLAY (DISP)
Press
DISP button to switch between display informations such as radio frequencies, clock, track and other informations depending
on the playing MODE.
9. MODE/LOUDNESS BUTTON (LD/MOD)
By pressing this key, user can select. AUX/TUNER/CD-MP3/USB/SD/MMC/AD2P mode.
Note: Selection of USB or MMC/SD mode only works if a USB or Card is placed in the slot.
LOUDNESS:
By pressing this key longer than 2 sec., you can select LOUDNESS mode.
10. BAND BUTTON (BD)
Each band is toggled cyclically by pressing this key FM1---FM2---FM3.
11. AUTOMATIC OR MANUAL TUNING (FREQ UP
OR FREQ DOWN )
(A) RADIO MODE
When pressed short, these keys are operated as SEEK tuning mode.
When pressed longer than 1 sec., they are operated as MANUAL tuning mode.
(B) CD/MP3 PLAYER MODE
When pressed short, they are operated as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 sec., they are operated as CUE or REVIEW mode.
12. AUTO SEEK SEARCH TUNING (A/PS)
By pressing shortly, the radio searches for each preset station.
When eld strength level is bigger than the threshold level of stop level, the radio is holding at that preset number for 5 sec. with
releasing mute, and then searches again.
By pressing longer than 1 sec, and then 6 strongest stations are preset to the corresponding preset number.
When AS operation is nished, the radio executes the preset scan.
13. ‘SCAN’ AUTOMATIC TUNING CONTROL (SCN)
This key is operated as RADIO SCAN. The operation is similar as normal search but different thing is holding 5 seconds on every
station detected in RADIO SCAN mode.
14. MUTE BUTTON (MUTE)
Press this button, audio will disappear. Press this button again in order to hear audio newly.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Akai acac112b wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Akai acac112b

Akai acac112b Bedienungsanleitung - Holländisch - 8 seiten

Akai acac112b Bedienungsanleitung - Französisch - 8 seiten

Akai acac112b Bedienungsanleitung - Spanisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info