Bedienungsanleitung Akai ALED 1905T (Seite 26 von 40) (Englisch)

456475

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

English - 67 -

Other Features

Displaying TV Information: Programme Number,

Programme Name, Sound Indicator, time, teletext,

channel type and resolution information is displayed

on the screen when a new programme is entered or

“INFO” button is pressed.

Mute Function: Press “

” button to disable sound.

Mute indicator will be displayed in the upper side of

the screen. To cancel mute, there are two alternatives;

the ﬁ rst one is pressing the “

” button and the second

one is increasing the volume level.

Picture Mode Selection: By pressing PRESETS

button, you can change Picture Mode settings in

accordance with your viewing requirements. Available

options are Dynamic, Natural and Cinema.

Displaying Subtitles: You can enable subtitles by

pressing the SUBTITLE button of the remote control.

Press SUBTITLE button again to disable subtitle

function.

Teletext

Teletext system transmits information such as news,

sports and weather on your TV. Note that is the signal

degrades, for example in poor/adverse weather

conditions, some text errors may occur or the teletext

mode may be aborted.

Teletext function buttons are listed below:

“

” Teletext / Mix : Activates teletext mode when

pressed once. Press again to place the teletext screen

over the programme (mix).Pressing again will quit the

teletext mode.

“RETURN” Index: Selects the teletext index page.

“INFO” Reveal: Shows hidden information (e.g.

solutions of games).

“OK” Hold: Holds a text page when convenient. Press

again to resume.

“

”/“ ” Subcode Pages : Selects subcode pages if

available when the teletext is activated.

P+ / P- and numbers (0-9): Press to select a page.

Note: Most TV stations use code 100 for their index

pages.

Coloured Buttons (RED/GREEN/YELLOW/

BLUE)

Your TV supports both FASTEXT and TOP text

systems. When these systems are available, the

pages are divided into groups or topics. When

FASTEXT system is available, sections in a teletext

page will become colour-coded and can be selected

by pressing the coloured buttons. Press a coloured

button that corresponds to with your needs. The

coloured writings will appear, showing you which

coloured buttons to use when TOP text transmission

is present. Pressing “ ” or “ ” commands will request

the next or previous page respec tively.

Tips

Screen Care: Clean the screen with a slightly damp,

soft cloth. Do not use abrasive solvents as they may

damage the coating layer of the TV screen. For your

safety, unplug the mains plug when cleaning the

set. When moving the TV, hold it properly from the

bottom part.

Image Persistence: Please note that ghosting may

occur while displaying a persistent image.LCD TVs’

image persistence may disappear after a short time.

Try turning off the TV for a while.

To avoid this, do not leave the screen in still picture

for extended periods.

No Power: If your TV system has no power, please

check the main power cable and connection to the

mains socket outlet.

Poor Picture: Have you selected the correct TV

system? Is your TV set or house aerial located too close

to a non-earthed audio equipment or neon lights, etc.?

Mountains or high buildings can cause double pictures

or ghost images. Sometimes you can improve the

picture quality by changing the direction of the aerial.

Is the picture or teletext unrecognisable? Check if you

have entered the correct frequency. Please retune the

channels. The picture quality may degrade when two

peripherals are connected to the TV at the same time.

In such a case, disconnect one of the peripherals.

No Picture: Is the aerial connected properly? Are the

plugs connected tightly to the aerial socket? Is the

aerial cable damaged? Are suitable plugs used to

connect the aerial? If you are in doubt, consult your

dealer. No Picture means that your TV is not receiving

a transmission. Have you selected the correct button

on the remote control? Try once more. Also make sure

the correct input source has been selected.

Sound: You can not hear any sound. Did you perhaps

interrupt the sound, pressing the

button? Sound is

coming from only one of the speakers. Is the balance

set to one extreme? See Sound Menu.

Remote Control: Your TV no longer responds to the

remote control. Perhaps the batteries are exhausted.

If so you can still use the local buttons on the TV.

Input Sources: If you cannot select an input source,

it is possible that no device is connected. Check

the AV cables and connections if you have tried to

connect a device

A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 67A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 67 29.04.2011 15:21:0829.04.2011 15:21:08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai ALED 1905T Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai ALED 1905T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info