Bedienungsanleitung Akai APC20 (Seite 4 von 20) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630562

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

TOP PANEL OVERVIEW

1. CLIP LAUNCH / SESSION OVERVIEW

– While in Clip Launch View (the

default), this 8x5 grid of buttons is used

to launch clips in Ableton Live. The 8

vertical columns represent 8 tracks in

the software while the 5 horizontal rows

represent 5 clip slots in each track. In

this view, the button LED colors

represent the following:

OFF – empty

AMBER – clip present, not

playing

GREEN – clip present, playing

RED – clip present, recording

When the SHIFT button is held, this grid

will change to Session Overview. In

this view, each button represents an

entire 8x5 grid of clip slots in the

software (that is, each button

represents a different Clip Launch

View). Selecting one will change the

Clip Launch View. This allows you to

access and use more than the 5 rows

and 8 tracks represented by just one

Clip Launch View. While in Session

Overview, the button LED colors

represent the following:

OFF – no clips are present in this

8x5 grid

AMBER – clips are present in this

8x5 grid, which is currently

selected

GREEN – clips are present in this 8x5 grid, which

contains clip slots that are currently playing

RED – clip are present in this 8x5 grid, but no clip slots

are currently playing

Examples: If you have 16 tracks with 20 clips in each track,

the "first" Clip Launch View will represent Clips 1-5 of Tracks

1-8.

If you hold SHIFT and press the second button in the first row,

after releasing SHIFT the Clip Launch View will represent Clips

1-5 of Tracks 9-16.

If you hold SHIFT and press the first button in the second row,

after releasing SHIFT the Clip Launch View will represent Clips

6-10 of Tracks 1-8.

2. SHIFT – Holding this button down lets you access extra controller features (printed in amber on the

control surface), such as Session Overview or a track available in the NAVIGATION / TRACK

SELECTION section. You can change the mode of the TRACK CONTROL FADERS by holding shift

and pressing one of the RECORD ARM / FADER MODE buttons.

3. SCENE LAUNCH – These buttons triggers an entire row of clips, called a "scene." All clips in that

scene will be triggered, including those not represented in that Clip Launch View.

4. CLIP STOP – These buttons stops all clips playing in the corresponding track, including those not

represented in that Clip Launch View. Hold the SHIFT button and press any CLIP STOP button to stop

all clips playing when they reach the end. (This differs from the STOP button, which stops playback

immediately.)

Note: In the software, a red

rectangle around an 8x5 grid of

clips represents APC20's current

Clip Launch View. You can

change/shift the Clip Launch View

with APC20's controls (e.g. in the

Session Overview).

Note: If the current Clip Launch

View is "between" two 8x5 grids in

the software, both

buttons

representing those two grids will

light.

10 10 10 11

12 12 12 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai APC20 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info