Bedienungsanleitung Akai MAX25 (Seite 7 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630538

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Edit Mode

1. To enter Edit Mode, press [EDIT].

2. Select a control to edit by touching, pressing,

or manipulating the desired control (fader,

pad, etc.). In the LCD, the name of the

selected control will appear in the upper left

corner, and the editable parameters will be

shown below it.

3. In each page of Edit Mode:

• Use the up/down CURSOR BUTTONS

to move through the parameters on the current page.

• If there are multiple pages (indicated by "Pg1," "Pg2," etc.), use the left/right CURSOR BUTTONS

to move between different pages.

• Turn the VALUE DIAL to change the currently selected value/setting. Any value/setting is

automatically selected; you do not have to press the VALUE DIAL to enter or select it.

4. To edit more controls, repeat Steps 2-3.

IMPORTANT: To store your new settings in the Program, hold [SHIFT] and press [STORE]. Without storing

your edited settings, your changes will be lost if you load a new Program.

For an overview of the available parameters, see the EDIT MODE PARAMETERS table at the end of this

manual.

Keyboard

MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are

Common, USB A1-A16, and USB B1-B16.

Octave: The keyboard's octave setting. The available settings are -4 to +4, with 0 as the center octave.

Transpose: The keyboard's transposition (in half-steps). The available settings are -36 to +36, with 0 as the

center position (no transposition).

MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will

be sent to MAX25's USB connection regardless of this setting.

Aftertouch: This determines the keyboard's Aftertouch setting. The available options are On and Off.

Pads

Type: The type of event that will be sent. The available settings are Note, Program Change, and Program

Bank.

MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are

Common, USB A1-A16, and USB B1-B16.

Note: If Note is the selected Type, this assigns the note number.

Aft: If Note is the selected Type, this determines the Aftertouch settings. The available options are Off, Ch

(Channel Aftertouch), and Poly (Poly Aftertouch).

Program Number / Pgm: If Program Change or Program Bank is the selected Type, this determines the

Program number. The available range is 000 – 127.

Msb / Lsb: If Program Change or Program Bank is the selected Type, these determine the MSB (Most

Significant Bit) and LSB (Least Significant Bit). The available range is 000 – 127.

MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will

be sent to MAX25's USB connection regardless of this setting.

Note Mode: If Note is the selected Type, this determines whether it is in Toggle or Momentary Mode.

Note: We recommend you set the KEYBOARD,

pads, and Sequencer to transmit MIDI data over

different channels. By default, they are all set to

the Common Channel, which means your

performance on one of those items could affect

the performance of another. To set the channels,

see the KEYBOARD, pads, and SEQUENCER

parts of this EDIT MODE section.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MAX25 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info