630518
298
Zoom out
Zoom in
Vorherige Seite
1/301
Nächste Seite
298
Release
An envelope parameter. This term describes the descent rate of an envelope to its
minimum value after a trigger is terminated. The release phase begins immediately after
the trigger is terminated, regardless of the envelope’s current status. For instance, the
release phase may be initiated during the attack phase.
Resonance
Resonance or emphasis is an important filter parameter. It emphasizes the frequencies
around the filter cutoff frequency by amplifing them with a narrow bandwidth. This is
one of the most popular methods of manipulating sounds. If you increase the emphasis
to a level where the filter enters a state of self-oscillation, it will generate a relatively
pure sine waveform.
Root Key
The root key defines the original pitch of a recorded instrument or of a sample.
Samples in the software contain the dedicated root key information. This information
will be created automatically during recording or importing.
Sample
When you tap the pads on your MPC hardware, you can trigger sounds that we call
samples. Samples are digitized snippets of audio that can either be recorded using the
recording function of your MPC software or loaded from the Browser.
Once a sample is present in the software, it can be manipulated in different ways. For
example, a sample can be trimmed, looped, pitch-shifted or processed, using various
effects offered by the software. When you have finished editing your sample, you can
assign it to one or more drum pads to play it. Samples can be either mono or stereo.
Sample Rate
This is the frequency representing the amount of individual digital sample scans per
second that are taken to capture an analog siginal digitally. For normal CD audio
recordings, 44100 samples per second are used, also written as 44.1 kHz. The
software offers sampling rates up to 96 kHz.
Sequence
A sequence is the most basic building-block of music you can compose on the
software. MIDI information from the MPC hardware pads, buttons, and Q-Link Knobs
are recorded to the tracks of a sequence. Each sequence contains 64 tracks. Each
project can store up to 128 separate sequences.
The length of a sequence can be set from 1 to 999 bars, which would be enough to
create an entire song using only one sequence. However, the software has a dedicated
Song Mode that lets you chain sequences together to create a song.
298

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

akai-mpc-touch

Suche zurücksetzen

  • Deutsche Bedienungsanleitung brauche ich bitte bitte , E-Mail : indianer1969@gmx-net


    DANKE Eingereicht am 30-5-2018 17:19

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Akai MPC Touch wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info