Bedienungsanleitung Akai VS-K206M-E3(S) (Seite 22 von 28) (Englisch)

7795

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Timer Recording

Timer recording can be programed on the TV-

screen with the remote control. The built-in

timer allows automatic unattended recording

of up to 8 programs within 1 month.

Preparation

•

Turn on the TV, and select the AV-program position on TV.

•

Load a video cassette with the erase prevention tab intact.

•Make sure with CALL that the time and date are

correct.(see page 18).

Note:

• In the event of a power failure the data of the

automatic recording will be maintained in the built-

in memory for about 30 minutes. Also, the clock

will continue to run for this period of time. Thereafter

the data will be deleted. When the power resumes,

the time display will blink indicating that the timer

setting will have to be set.

• In case of the timer recording from the scart socket

proceed as follows: When "CH" is blinking in picture

4, press AV repeatedly until AU appears.

• If the clock symbol blinks when the timer recording

is completed, the TV program has not been

completely recorded because of an insufficient

tape supply.

Example: Timer recording for channel 1, 13:00 to

14:30 with Tape speed LP on timer program number 1.

Press MENU. Press

repeatedly until the

dot before TIMER

REC SET blinks. Then

press ENTER.

Set the Starting time (13:00), ending time

(14:30), channel (1 RTP1) and Tape speed (LP)

in the same way as the step 3.

Each line stand for

one program of the 8

memories. Select one

line with or

. Then press

ENTER.

Set the desired date

with

/ or 10

number buttons.

Then press

accept it.

Press ENTER to accept them.

TIMER REC SET

VCR EXTENSION

CHANNEL SETUP

SYSTEM SETUP

SELECT :

ENTER

: ENTER

EXIT

SHARPNESS

--:--

--:-------- --

--:--

--:-- --

------

--:--

--:-- --

------

--:--

--:-- --

------

--:--

--:-------- --

--:--

--:-------- --

--:--

--:-------- --

--:--

--:-------- --

/ ENTER

SELECT :

EXIT : MENU

PRESS T-REC

FOR TIMER RECORDING

• In case of an erroneous

input press

to go back to before step

and enter again.

The every channel will

appear in the back-

ground of this setting

screen.

The message

"PRESS T-REC

FOR TIMER RE-

CORDING" will ap-

pear on TV-screen.

You can turn on the timer right now or later by

pressing of TIMER REC or

It was not until you turn on the timer that

recording will automatically start at the

programmed time.

• If the cassette is ejected, the erase prevention

tab of the cassette may be removed.(see

page 14)

• As long as the timer is activated (clock symbol

will appear), you cannot use the VCR. If you

want to use the VCR, press TIMER REC at

first to deactivate the timer.

To enter other

programs, repeat

steps 2 through 4.

Or, press MENU

repeatedly until the

TV-picture appears.

As soon as timer is set,

clock symbol will appear

Note: If any button is not

pressed within 60 seconds,

the unit switches back to TV operation.

in display.

If no video cassette has been loaded, the clock

symbol blinks.

4F37001A (E)P20-BACK 5/6/2002, 16:4120

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai VS-K206M-E3(S) Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai VS-K206M-E3(S)

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info