Bedienungsanleitung Alcatel One Touch Pixi 3 - 4028S (Seite 5 von 147) (Englisch)

635627

Zoom out

Zoom in

Vorherige Seite

1/147

Nächste Seite

7 8

• BATTERY AND ACCESSORIES:

Before removing the battery from your mobile phone, please make sure that the

mobile phone is switched off.

Observe the following precautions for battery use:

- Do not attempt to open the battery (due to the risk of toxic fumes and burns).

- Do not puncture, disassemble, or cause a short-circuit in the battery,

- Do not burn or dispose of a used battery in the garbage or store it at temperatures

above 60°C (140°F).

Batteries must be disposed of in accordance with locally applicable environmental

regulations. Only use the battery for the purpose for which it was designed. Never

use damaged batteries or those not recommended by TCL Communication Ltd. and/

or its affiliates.

This symbol on your mobile phone, the battery, and the accessories means

that these products must be taken to collection points at the end of their

life:

- Municipal waste disposal centers with specific bins for these items of

equipment

- Collection bins at points of sale.

They will then be recycled, preventing substances being disposed of in the

environment, so that their components can be reused.

In European Union countries:

These collection points are accessible free of charge. All products with this sign must

be brought to these collection points.

In non European Union jurisdictions:

Items of equipment with this symbol are not be thrown into ordinary bins if your

jurisdiction or your region has suitable recycling and collection facilities; instead they

are to be taken to collection points for them to be recycled.

In the United States you may learn more about CTIA’s Recycling Program at http://

www.gowirelessgogreen.org/

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

• CHARGERS

Home A.C./ Travel chargers will operate within the temperature range of: 0°C (32°F)

to 40°C (104°F).

The chargers designed for your mobile phone meet with the standard for safety

of information technology equipment and office equipment use. Due to different

applicable electrical specifications, a charger you purchased in one jurisdiction may not

work in another jurisdiction. They should be used for this purpose only.

Characteristics of power supply (depending on the country):

Travel charger: Input: 100-240 V, 50/60 Hz, 150 mA

Output: 5 V, 550 mA

Battery: Lithium 1400/1650 mAh

• RADIO WAVES:

THIS MOBILE PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR

EXPOSURE TO RADIO WAVES.

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured

not to exceed the emission limits for exposure to radio-frequency (RF) energy. These

limits are part of comprehensive guidelines and establish permitted levels of RF

energy for the general population. The guidelines are based on standards that were

developed by independent scientific organizations through periodic and thorough

evaluation of scientific studies. These guidelines include a substantial safety margin

designed to ensure the safety of all persons, regardless of age and health.

The exposure standard for mobile phones employs a unit of measurement known

as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities such

as the Federal Communications Commission of the US Government (FCC), or by

Industry Canada, is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are

conducted using standard operating positions with the mobile phone transmitting at

its highest certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified power level, the actual SAR

level of the mobile phone while operating can be well below the maximum value. This

is because the mobile phone is designed to operate at multiple power levels so as to

use only the power required to reach the network. In general, the closer you are to

a wireless base station antenna, the lower the power output of the mobile phone.

Before a mobile phone model is available for sale to the public, compliance with

national regulations and standards must be shown.

The highest SAR value for this model mobile phone when tested is 1.01 W/Kg for use

at the ear and 1.35 W/Kg for use close to the body.

While there may be differences between the SAR levels of various mobile phones

and at various positions, they all meet the government requirement for RF exposure.

For body-worn operation, the mobile phone meets FCC RF exposure guidelines

provided that it is used with a non-metallic accessory with the handset at least 10

mm from the body. Use of other accessories may not ensure compliance with FCC

RF exposure guidelines.

Additional information on SAR can be found on the Cellular Telecommunications &

Internet Association (CTIA) Web site: http://www.ctia.org/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alcatel One Touch Pixi 3 - 4028S Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info