Bedienungsanleitung Alcatel T60 (Seite 1 von 2) (Englisch)

586654

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

SETTING THE PHONE

NOTE: Program the following settings before using the

phone.

There are 6 options to set:

WALL MOUNTING

1. Rotate the wall mounting knob as shown below:

Wall mounting

knob Location

Rotate 180°

WALL MOUNTING: The knob is designed

to keep this unit in place when the

telephone is vertically placed on the wall.

2. Install the base unit to the wall and then plug one end of line

cord into the base and the other end into the modular telephone

line jack.

3. Fix the telephone on the wall as shown below.

OPTIONS MENU

TELEPHONE JACK REQUIREMENTS

To use this phone, you need a RJ11C type modular telephone jack,

(similar to the one pictured here) installed in your home. Call your

local phone company to have one installed.

Modular telephone line jack

Wall plate

NOTE: If there is any item missing in the package, please

contact the shop where you bought this product.

INSTALLATION

Never install telephone wiring during a lightning storm.

Never touch un-insulated telephone wires or terminals, unless

the telephone line has been disconnected at the network

interface.

Install or modify telephone lines with caution.

Never install telephone to operate in wet or damp locations.

CAUTION: Disconnect the phone cord from the wall

outlet before installing or replacing the batteries.

INSTALLING AND REPLACING THE BATTERIES

Your Caller ID phone uses 3 AA-Size alkaline batteries for receiving

and storing Caller ID records and storing the number.

IMPORTANT: If you are not going to use the telephone

for more than 30 days, remove the batteries.

Month Day Hour

Low battery indicator

Speakerphone

Mute Mic Repeat New CID Call-log

Number

Voice mail

Morning

Afternoon

Minutes

Down button

Mute button

Flash button

M4 button

M3 button

Dial back button

Up button

Menu button

Delete button

Store button

M1 button

M2 button

Speaker Volume button

Speaker button

Display

Ringer Volume Switch

PARTS CHECKLIST

Your package includes the following items:

User’s Guide Base Handset Coiled cord Line cord

INTRODUCTION

<RXU&DOOHU,'SKRQHVWRUHVDQGGLVSOD\VVSHFL¿FLQIRUPDWLRQ

provided by your local telephone company, to subscribers of

&DOOHU,'RUVLPLODUFDOOHULGHQWL¿FDWLRQVHUYLFHV

MAIN FEATURES

FSK/DTMF auto detect.

Alphanumerical backlight display.

6 languages interface selection.

Record up to 58 incoming caller names and numbers.

Record up to 10 recent dialed numbers.

10 two-touch memories.

4 one-touch memories.

Redial.

Pulse or Tone dialing mode.

Flash timing selectable.

Mute function.

Speakerphone.

SHORT GLOSSARY OF TERMINOLOGY USED IN

THIS MANUAL

Hook switch. The part of the phone that pops up to activate the

phone line when the handset is lifted from the base.

Off-hook. The phone is in active mode when the handset is off

the base cradle or the SPEAKER feature is on.

On-hook. The phone is in standby mode when the handset is on

the base cradle.

Your Caller ID phone enables you to:

Identify callers before you answer the phone.

View the time and date of each incoming call.

Record up to 58 Caller ID name and number messages

sequentially.

To get the most from your new phone, please read through this

user’s guide.

BATTERY

1. If the telephone line cord is connected, disconnect it from the

base unit.

2. Carefully turn the phone over, use a pen or paper clip to loosen

the battery cover. Open the battery compartment by pushing

on the battery cover and sliding it away from the unit.

3. Insert 3 AA-size alkaline batteries (not included) as shown on

the engraving in the battery

compartment.

4. Snap the battery compartment

door back into place.

5. Reconnect the telephone

line cord to the base.

INSTALLING THE PHONE

Your phone should be placed on a level surface, such as a desk or

table top, or you can mount it on a wall.

1. Connect the handset.

2. Connect the telephone

line.

Phone

number display

Name display

Microphone

Redial/Pause button

Time format

Date format

English/French/Spanish/

Turkish/Polish/Greece

SETTING DATE/TIME

Enter Month, Day,

Hour and Minute

OR OR

SETTING LANGUAGE

Select Language

OR OR

SETTING LOCAL AREA CODE

The area code prior to an incoming number will be removed from

the caller ID display if it matches with the area code you set.

Enter your area code

SETTING LONG DIST CODE

Enter your long

distance code

SETTING FLASH TIME

Select timing

100/300/1000/600

OR OR

SETTING TONE/PULSE

Select Tone or Pulse

ALCATEL T60

ATLINKS Europe, 22 quai Gallieni 92150 Surensnes - France

Alcatel Logo and Alcatel name are trademarks of Alcatel Lucent and used under license by Atlinks.

ALCATEL T60

ATLINKS Europe, 22 quai Gallieni 92150 Surensnes - France

Alcatel Logo and Alcatel name are trademarks of Alcatel Lucent and used under license by Atlinks.

:+>ਸ਼ކપޢа࠳வ1࣒މ৚ु͹4:ޛ386࣒މ৚ु͹:>>

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alcatel T60 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info