Bedienungsanleitung Alcatel Temporis IP100 (Seite 2 von 2) (Englisch)

586627

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

1. Please see with your administrator to know which line key has been assigned to Do not disturb

function. Press to enable/disable.

Note: You can also control this feature in the user web interface, SYSTEM > Call Settings.

Attended transfer :

1. Press during the active conversation, the call is put on hold.

2. Dial the second telephone number.

3. When the call is answered, press to complete the operation.

Blind transfer :

1. Press during the active conversation, the call will be on hold.

2. Dial the 2nd telephone number and press .

Note: pressing while you already have two active calls will automatically transfer the call

towards them.

• Press and then pickup handset or press .

• With the handset : pick up the handset.

• With a headset : press .

• Note: to reject a call press . You can use to stop the phone ringing without rejecting the call.

1. Press . To retrieve the call, press again .

Note : with two active calls, select the desired call with and press to hold or resume.

1. To check your phone’s IP address dial *123456# without lifting the handset. A voice

announcement will read out the IP address.

2. Open a web browser on your computer. Enter http:// and the IP address in the address bar and

validate.

3. Default login and password are « user/user » for users and « admin/admin » for administrator.

4. Minimum config is sip account. Check administrator guide for details.

• Pre-dialling : press , dial the phone number and pick up the handset to start talking.

• Direct dialling : lift the handset and enter the phone number.

• Headset : press and enter phone number. You can also press , dial, and then .

Program direct memory keys :

1. Please see with your administrator to program those keys

Speed dial keys :

1. Go on web interface, connect yourself as user, and go to SYSTEM > Memory Keys.

2. Select the key on which you want to save your correspondent phone number.

3. In VALUE field, type the phone number of your correspondent. Press Save to complete.

4. To call the stored contact, make a long press on the corresponding key in on hook mode.

Phone web interface

Making a call

Accepting a call

Redial

• To access your voice mailbox, press without lifting the handset. You can hear your messages

on the speaker or use the handset or headset.

Voice mail

Direct memory & speed dial keys

1. Once in line with 1st caller, press , 1st caller is put on hold.

2. Then call the 2nd number.

3. After, 2nd call is established, press to set up the conference.

Note: pressing when you already have two active calls will create a conference between your

phone and your two correspondents.

1. Go on web interface, connect yourself as user, and go to SYSTEM > Call Settings > LINE1.

2. Then select Call Forward Settings, tick the desired call forward type and destination number and

press Save key.

Note: If you have a function key assigned to Call Forward, you can enable/disable the service by

pressing this key.

Call transfer

3-party conference

Putting a call on hold

Do not disturb

Call forward

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alcatel Temporis IP100 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alcatel Temporis IP100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info