Bedienungsanleitung Alecto COA3910 (Seite 42 von 44) (Deutsch, Englisch, Holländisch, Französisch)

794851

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

hydrogen, hepatic gas, sulphur dioxide, aerosol, propellant, alcohol preparation, paint, thinner, dissolvent, bonding agents,

shampoo, aftershave balm, perfume, car exhaust (cold start) and certain cleaning agents.

MAINTENACE:

To keep your CO detector in proper working order, please follow these easy steps:

• Once a month, check that the alarm is working properly by pressing the test button.

• Clean the CO detector with a vacuum cleaner or with a soft cloth or brush once every month to remove excess dust.

• Check whether the batteries are damaged, exhausted or corroded.

• Explain to children that they should not play with the CO detector.

• Ensure children are aware of the dangers of carbon monoxide poisoning.

• Never use cleaning agents or other solutions to clean the CO detector.

• Never use air fresheners, hair spray or other aerosols near the CO detector.

• Don’t paint the CO detector. Paint covers the vents preventing the sensor from detecting CO.

• Never disassemble, repair or modify the product yourself; there’s a high risk that it will no longer function correctly or

reliably.

BATTERY REPLACEMENT

Remove the battery cover on the back of the unit by sliding the cover off the product, you will now have access to the

batteries.

Remove the batteries from the unit and replace them with 3x new High Energy Alkaline batteries 1,5V AA - LR6, making

sure that the battery polarity matches the instructions in the battery compartment.

SENSOR REPLACEMENT:

The sensor has a lifetime of 10 years. After 10 years you need to replace the complete product, the sensor itself is not

exchangeable.

If the yellow LED illuminates within these 10 years, even though you’ve reconnected or replaced the batteries, please refer

to the paragraphs Reason for sensor fault and Sensor fault caused by chemical gases.

If the yellow “FAULT” LED lights up 3x and 3 beeps per minute are heard, the entire product should be replaced. This is the

End of life warning.

SPECIFICATIONS:

Power supply: 3 x LR6, 1,5V AA high energy Alkaline batteries

Sensitivity and time: 30ppm, alarm is not activated within 120 minutes

50ppm, alarm is activated within 60~90 minutes

100ppm, alarm is activated within 10~40 minutes

300ppm, alarm is activated within 3 minutes

standby consumption: <30µA

consumption at alarm: <65mA

Sound pressure at alarm: >85dB (3m distance)

Environmental conditions

during use: -10~+45°C, 0~93% humidity.

Type: Type B (unchecked output)

ENVIRONMENT:

Do not throw away used batteries, but recycle them using your local chemical depot. Product may not be thrown out as

normal waste, but must be recycled as electrical waste.

DECLARATION OF PERFORMANCE

The declaration of performance is available on the website http://DOC.hesdo.com/COA3910-DOC.pdf

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto COA3910 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info