Bedienungsanleitung Alesis Q25 (Seite 4 von 20) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

693701

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

TOP PANEL OVERVIEW

1. KEYBOARD – The

KEYBOARD functions

as a normal electronic

piano keyboard during

performance but can

also be used to adjust

MIDI settings and send

MIDI messages. The

labels above the keys

indicate their functions.

The numbered keys

allow you to enter

values for settings.

Press the Cancel or

Enter key to cancel or

confirm your selection, respectively. See SELECTING & EDITING MIDI COMMANDS for more information.

2. PITCH BEND WHEEL – Transmits MIDI Pitch Bend information to raise or lower the pitch of a note temporarily.

3. MODULATION WHEEL – This wheel can be used to transmit continuous controller data (CC #1 or Modulation Depth).

4. DATA ENTRY SLIDER – This slider lets you send MIDI messages for the currently selected parameter from the

KEYBOARD (e.g., REVERB DEPTH, VOLUME, etc.). You can select a parameter by pressing MIDI / SELECT then the

corresponding key on the KEYBOARD.

5. MIDI / SELECT – Pressing this button allows you to adjust MIDI settings and send MIDI messages by pressing labeled

keys on the KEYBOARD. See SELECTING & EDITING MIDI COMMANDS for more information.

6. OCTAVE UP / DOWN – These buttons can be used to shift the keyboard's range up and down.

SELECTING & EDITING MIDI COMMANDS

The MIDI / SELECT button and the keys on the KEYBOARD allow you to adjust MIDI parameters and send precise MIDI

messages and information quickly and easily:

1. Press MIDI / SELECT.

2. Press the key on the KEYBOARD whose MIDI setting (printed above the key) you want to adjust

or send.

3. Enter a value with the numbered keys on the KEYBOARD.

4. Press the Enter or Cancel key on the KEYBOARD to confirm or cancel your choice, respectively.

5. Press MIDI / SELECT if the button is still lit.

VELOCITY – Press this key to set the DATA ENTRY SLIDER to adjust the note velocity. Increasing this value increases the

MIDI velocity value generated by a light key press.

AFTERTOUCH – Press this key to set the DATA ENTRY SLIDER to send Aftertouch information (also sometimes referred to

as Channel Pressure).

REVERB DEPTH – Press this key to set the DATA ENTRY SLIDER to CC #91 (Reverb Send Level). The default value for this

setting is 64.

VOLUME – Press this key to set the DATA ENTRY SLIDER to CC #7 (Channel Volume).

CC DATA (Control Change Data) – Sets the value to be sent. Pressing the Enter key will send a MIDI message.

OCTAVE – Lowers or raises the octave range of the KEYBOARD with the "OCTAVE –" and "OCTAVE +" buttons, respectively.

You can transpose the keyboard up to two octaves in either direction. Press STANDARD to return the KEYBOARD to its

original octave range

b / # – Lowers or raises (respectively) the pitch of the entire KEYBOARD a semitone.

RESET – Press this key followed by the Enter key to send a reset message to all controllers and return the Q25 to its original

settings.

Note: This button does not reset the current octave range or transposition of the KEYBOARD.

CC NO. (Control Change Number)

– Sets the MIDI CC# to be sent. (A message will not be sent until the Enter key is pressed

when selecting CC Data.)

PROGRAM

– Sets the MIDI Program Change

number.

Note: After you enter a CC#, the number will be remembered by the

Q25. However, if you want to send a CC or Program Change

message, you must enter the value using the numbered keys on the

KEYBOARD each time (even if the desired value is shown in the

LCD) before pressing Enter.

PITCH MODULATION

DATA ENTRY

DOWN

MIDI / SELECT

OCTAVE

USB/MIDI KEYBOARD CONTROLLER

REVERB

DEPTH

NOTE

AFTER

TOUCH

VELOCITY VOLUME

ASSIGNMENT DATA ENTRY

TRANSPOSE

RESET

DATA

NO.

MIDI

CHANNEL

PROGRAM

CANCEL ENTER

NUMERIC KEYPAD

6 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alesis Q25 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info