631095
33
Zoom out
Zoom in
Vorherige Seite
1/35
Nächste Seite
31
Troubleshooting
Condition Cause Reference
The needle thread
breaks.
The bobbin thread
breaks.
The needle
breaks.
Skipped stitches
Seam puckering
The cloth is not
feeding smoothly.
The machine
doesn’t work.
Noisy operation
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set properly
under the presser foot at the beginning of sewing.
6. The threads are not drawn to the rear after previous sewing.
7. The thread is too heavy, or too fine for the needle.
1. The bobbin thread is not threaded properly in the bobbin
case and shuttle.
2. Lint has collected in the shuttle area.
3. The bobbin is damaged and doesn't turn smoothly.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The threads are not drawn to the rear after the previous sewing.
6. The needle is too fine for the fabric being sewn.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle and/or threads are not suitable for the work being
sewn.
4. The needle thread is not threaded properly.
5. The wrong needle is being used.
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
1. The feed dog is packed with lint.
2. The stitches are too fine.
1. The machine is not plugged in.
2. A thread is caught in the shuttle race.
3. The clutch is disengaged.
1. A thread is caught in the shuttle race.
2. Lint has built up in the shuttle or the shuttle race.
Page 9
Page 11
Page 6
Page 6
Pages 10, 14
Page 14
Page 6
Page 8, 10
Page 29
Change the bobbin
Page 6
Page 6
Page 6
Page 11
Pages 10, 14
Page 6
Page 6
Page 6
Page 6
Page 9
Change the needle
Page 11
Page 9
Page 6
Make stitch shorter
Page 29
Make stitch longer
Page 4
Page 29
Pages 7, 8
Page 29
Page 29
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alfa Next 30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Alfa Next 30

Alfa Next 30 Bedienungsanleitung - Deutsch - 72 seiten

Alfa Next 30 Bedienungsanleitung - Holländisch - 34 seiten

Alfa Next 30 Bedienungsanleitung - Französisch, Italienisch, Portugiesisch, Spanisch - 72 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info