Bedienungsanleitung Allen-Heath GL-2 (Seite 3 von 16) (Englisch)

541389

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

GL2

INTRODUCTION

The GL2 continues ALLEN & HEATH’s commitment to provide high quality audio mixing consoles engineered

to meet the exacting requirements of today’s audio business. It brings you the latest in high performance technology

and offers the reassurance of over two decades of console manufacture and customer support.

This user guide presents a quick reference to the function, application and installation of the GL2. For further

information on the basic principles of audio system engineering please refer to one of the specialist publications

available from bookshops and audio equipment dealers.

Whilst we believe the information in this guide to be reliable we do not assume responsibility for inaccuracies. We

also reserve the right to make changes in the interest of further product development.

SERVICE AND TECHNICAL SUPPORT

Under normal conditions the GL2 does not require user maintenance or internal calibration. Any service work

required should be carried out by qualified service personnel only.

We are able to offer further product support through our worldwide network of approved dealers and service agents.

To help us provide the most efficient service please would you keep a record of the console serial number, and date

and place of purchase to be quoted in any communication regarding this product.

PRECAUTIONS.

l AC POWER: Check the power supply label for the correct AC mains voltage setting. Allow adequate

space behind the console for ventilation.

l CONNECTIONS: Use audio connectors and cables only for their intended purpose. Do not connect any

source of AC or DC power to the console audio connectors. Do not connect the output

of power amplifiers directly to the console.

l CLEANING: Avoid the use of chemicals, abrasives and solvents. The control panel is best cleaned

with a soft brush and lint-free cloth. To remove stubborn marks (such as chinagraph

pencil) isopropyl alcohol may be used.

l LUBRICATION: The faders, switches and potentiometers are lubricated for life. The use of electrical

lubricants on these parts is not recommended.

l DIRT, DUST, SMOKE and MOISTURE: Prevent damage to the moving parts, such as faders and

potentiometers, and cosmetics by avoiding drinks spill age, tobacco ash and smoke, and

exposure to rain and condensation. Protect from excessive dirt, dust, heat and

vibration.

Mains electricity is dangerous and can kill. Mains voltage is present within the console power

unit. Do not remove the internal power unit or rear cover with mains connected. Check your

mains wiring and earthing before switching on.

DO NOT REMOVE THE MAINS EARTH CONNECTION!

The console chassis is always connected to mains earth to ensure your safety. Audio 0V is

connected to mains earth within the power unit. Operating the ground lift switch on the rear

panel of the unit will separate audio 0V from mains earth. This switch can be used to avoid

problems with ground loops.

SAFETY WARNING !

Publication ......................AP0177 Issue 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath GL-2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info