541359
6
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
iLive Fixed Format Getting Started Guide 6 AP7141 iss.5
System components
PL-6
PL-5
The MixRack is the heart of the digital audio processing
system, housing the 64x32 DSP mix engine together with
control and audio networking interfaces. The DSP can be
configured for mono/stereo and type of mix (group, aux,
mains, matrix). The system provides full dynamics, EQ and
delay processing for all inputs and masters, 8 built-in
‘RackExtra’ effects and 16 DCA groups. The 8FX returns add
to the 64 channels providing up to 72 sources to the mix. All
racks provide the full 64x32 DSP processing and differ only
in the number of Mic/Line inputs and XLR line outputs
available. The Port B option allows digital mic splitting and
system expansion from a choice of audio networking cards.
iDR-64 Biggest rack: 64 Mic/Line inputs 9U
32 XLR line outputs
iDR-48 Standard rack: 48 Mic/Line inputs 8U
24 XLR line outputs
iDR-32 Mid sized rack: 32 Mic/Line inputs 6U
16 XLR line outputs
iDR-16 Smallest rack: 16 Mic/Line inputs 3U
8 XLR line outputs
The Surface is simply a network controller for the
MixRack. It has a built-in interface for local audio
which is transported to and from the MixRack via the
ACE connection along with the Ethernet control. Each
bank of faders has 4 or 6 layers providing a total of 72,
80 or 112 control strips depending on Surface size.
These strips are freely assignable as inputs, mix
masters or DCAs in any combination. The Surfaces
offer the same control, the difference being a reduced
rotary control section for the smaller models. All
processing is available using the TouchScreen.
iLive-T112 Biggest surface:
28 faders, 4 layers = 112 strips
16 local line in = 8 TRS, 4 RCA, 2 SPDIF
14 local out = 8 TRS, 2 RCA, 1 SPDIF, Monitor
iLive-T80 Mid sized surface:
20 faders, 4 layers = 80 strips
8 local line in = 4 TRS, 2 RCA, 1 SPDIF
10 local out = 4 TRS, 2 RCA, 1 SPDIF, Monitor
iLive-R72 Smallest surface:
12 faders, 6 layers = 72 strips
8 local line in = 4 TRS, 2 RCA, 1 SPDIF
10 local out = 4 TRS, 2 RCA, 1 SPDIF, Monitor
PL Series controllers A range of remote controllers
is available with assignable switches, LEDs, encoders
and faders. A PL-8 4in/4out GPIO controller is also
available. These connect to the MixRack via the PL-
Anet serial port using CAT5 cable and can be
configured using the Surface or laptop. The PL-9 hub
is allows star point instead of daisy chain connection.
More information on the PL Series is available on the
Allen & Heath web site.
PL-3 PL-4
PL-9
Hub
PL-10
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Allen-Heath iLive wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info